BELINEA 101910 Manual de usuario

Service Manual

MAXDATA Systeme GmbH

Elbestr. 12-16

Model: Belinea 101910

Art. No. 111908

45768 Marl / Germany

Belinea101910

Content

Chapter Page

A. WARNING 3

B. SAFETYPRECAUTIONS 4

1. DIMENSIONS 5

2. GENERAL INFORMATION 7

3. SPECIFICATIONS 8

4. THEORYOF OPERATION 20

5. CONTROL LOCATION 24

6. NECESSARYEQUIPMENT LIST 33

7. BLOCK DIAGRAM 34

8. CONDUCTOR VIEW36

9. SCHEMATIC DIAGRAM SIGNAL BD 39

10. SCHEMATIC DIAGRAM POWER BD 46

11. EXPLODED VIEW 54

12. TROUBLE SHOOTING HINTS 55

13. BOM LIST 58

14. SPARE PARTS LIST 63

15. AUTOBALANCE 66

MAXDATA Servicemanual 111908 Page 2

- Confidential -

Belinea101910

WARNING

This service information is designed for experienced repair technicians only and is not

designed for use by the general public.

It does not contain warnings or cautions to advise non-technical individuals of

potential dangers in attempting to service a product.

Products powered by electricity should be serviced or repaired only by experienced

professional technicians.

Any attempt to service or repair the product or products dealt within this service

information by anyone else could result in serious injury or death.

MAXDATA Servicemanual 111908 Page 3

- Confidential -

Belinea101910

SAFETY PRECAUTIONS

1. CAUTION:

No modification of any circuit should be attempted. Service work should only be performed after you

are through familiar with all of the following safety checks and servicing guide lines.

2. SAFETY CHECK

Care should be taken while servicing this LCD display. Beware of the high voltage used in the inverter

circuit. These voltages are exposed in such areas as the associated transformer circuits.

3. POWER SUPPLY REQUIREMENTS

The internal power converter for this display utilizes an AC cord. The AC cord is detachable.

Any attempt to replace another adapter could result in serious problem on the display.

4. LEAKAGE CURRENT HOT CHECK

4-1 Plug the AC cord directly into the AC outlet. Do not use an isolation transformer during this check.

4-2 Connect a 1500 ohm, 10 watt resistor, paralleled by a 0.15uF capacitor between each metallic part

and a good earth ground.

4-3 Use an AC voltmeter with 1000 ohm / volt or more sensitivity and measure the AC voltage across

the combination 1500 ohm resistor and 0.15uF capacitor.

4-4 Move the resistor connection to each exposed metallic part and measure the voltage.

4-5 Reverse the polarity of the AC plug in the AC outlet and repeat the above measurement.

4-6 Voltage measured must not exceed 1.5 volt RMS, from any exposed metallic part to the ground.

A leakage current tester may be used in the above hot check, in which case any circuit measured

must not exceed 1 milliamp. In the case of a measurement exceeding the 1 milliamp value, a

rework is required to eliminate the chance of a shock hazard.

To Metal Parts

AC VOLTMETER

1500 10W

0.15u

Earth Ground

MAXDATA Servicemanual 111908 Page 4

- Confidential -

Belinea101910

1. DIMENSIONS (Unit: mm)

1.1 Front View

1.2 Top View

MAXDATA Servicemanual 111908 Page 5

- Confidential -

Belinea101910

1.3 Rear View

1.4 Side View

MAXDATA Servicemanual 111908 Page 6

- Confidential -

Belinea101910

2. GENERAL INFORMATION

2.1. OUTLINE

This monitor is a 19" multi-scan color LCD display with the following features / OSD (on screen display) control

allows easy user adjustment. Power saving function, which helps saving power, is also one of the highlights of

this model.

2.2. FEATURES

2.2.1 Power Saving

The built in Power Saving function based on VESA-DMPS standard. Power energy shall be saved

by controlling the circuit in accordance with power save signal from computer.

2.2.2 OSD (on screen display) function

OSD (5 Languages) function is excellent and new man-machine interface.

Anyone is able to set up the picture as the like through OSD menu.

2.2.3 Self Test function

Self Testing picture comes out by pushing any key in the case of no-connection with computer

or power saving operation. This function shows if monitor is alive or not and can be used for self

agingtest.

2.2.4 Ergonomic design

Low emission design to meet MPR II and TCO03

2.2.5 Multi scans with digital technology

8 bit micro controller controls the circuit operation to meet with wide range signal of

Fh=31~83 kHz and Fv= 56~75 Hz. So VGA640x400, VGA640x480, SVGA800x60, XGA 1024x768,

SXGA 1280x1024 can bee use.

2.2.6 Factory preset

The product has 32 memory modes in total. 15 modes are preset and 17 modes are user definable.

2.2.7 Fine dot pitch

LCD panel with a fine dot pitch (Horizontal: 0.264 mm / Vertical: 0.264 mm)

2.2.8 Superior display performance

High contrast : 700 : 1(Typical)

High brightness : 250 cd / m² (Typical)

Wide view angle : 170 / 170 degrees (H/V)

2.2.9 Special function

VESA DDC2B (Display Data Channel) Compatible

MAXDATA Servicemanual 111908 Page 7

- Confidential -

Belinea101910

3. SPECIFICATION

3.1. Outline

3.1.1 Front Indication: POWER SW, LED (Green/Amber), UP, DOWN, LEFT, RIGHT, Set/Auto and MENU

keys are located on the front panel.

3.1.2 Video signal cable connector, audio line-in receptacle and AC inlet are located on the back side cabinet.

3.1.3 OSD menu includes the following function. CONTRAST, BRIGHTNESS, H.POSITION, V.POSITION

COLOR-TEMPERATURE, CLOCK, PHASE, LANGUAGE, VOLUME, POWER-ON-RECALL

3.1.4 CONTRAST and BRIGHTNESS can be directly controlled with UP / Down key.

3.1.5 VOLUME can be controlled with LEFT / RIGHT key.

3.2. MECHANICAL SPECIFICATIONS

3.2.1 Dimension Height: 437 mm

Width: 426 mm

Depth: 198 mm

3.2.2 Net Weight: 5.0 kg

3.2.3 Maximum Viewable Area: Diagonal 482.6 mm (19")

3.3. PANEL SPECIFICATIONS

Part No.

x=0.313

=0.329Color coordinate

85 de

reesView an

ical 25 msRes

onse time

0.264 m

Pixel

itch

250 cd/ m2Bri

htness

700:1Contrast ratio

8 bitDriver bit of

anel

M190EN02

MAXDATA Servicemanual 111908 Page 8

- Confidential -

Belinea101910

3.4. CONNECTORS

3.4.1 AC inlet: CEE22 typed connector

3.4.2 Audio: Line-in receptacle

PHONEJACK STEREO

3.4.3 Video signal cable connector for analog input: 15P Mini D-Sub

CN6

DB15HD

16 17

PIN MNEMONI SIGNAL

1 RV Red Video

2 GV Green Video

3 BV Blue Video

4 NC None

5 GND Ground

(DDC return)

6 RG Red GND

7 GG Green GND

8 BG Blue GND

9 +5V +5V (for

DDC)

10 SG Sync GND

11 NC None

12 SDA DDC Data

13 HS Horizontal

Sync

14 VS Vertical Sync

15 SCL DDC Clock

MAXDATA Servicemanual 111908 Page 9

- Confidential -

Belinea101910

3.4.4 Video signal cable connector for digital input: 24P DVI-D

CN9

DVI-D

RX2-

RX2+

GND

RX4-

RX4+

SCL

SDA

RX1-

RX1+

GND

RX3-

RX3+

GND

RX0-

RX0+

GND

RX5-

RX5+

GND

RXC+

RXC-

No.

Signal Name Description

1 RX2- TMDS negative differential input,

channel 2

2 RX2+ TMDS positive differential input,

channel 2

3 GND Logic Ground

4 RX4- Reserved. No connection

5 RX4+ Reserved. No connection

6 SCL DDC2B Clock

7 SDA DDC2B Data

8 VS Reserved. No connection

9 RX1- TMDS negative differential input,

channel 1

10 RX1+ TMDS positive differential input,

channel 1

11 GND Logic Ground

12 RX3- Reserved. No connection

13 RX3+ Reserved. No connection

14 +5V Power

15 GND Logic Ground

16 HP SENSE Pin, Pull High

17 RX0- TMDS negative differential input,

channel 0

18 RX0+ TMDS positive differential input,

channel 0

19 GND Logic Ground

20 RX5- Reserved. No connection

21 RX5+ Reserved. No connection

22 GND Logic Ground

23 RXC+ TMDS positive differential input,

reference clock

24 RXC- TMDS negative differential input,

reference clock

MAXDATA Servicemanual 111908 Page 10

- Confidential -

Otros manuales para 101910

Tabla de contenidos

Otros manuales de Monitor de BELINEA

BELINEA

BELINEA 101711 Manual de usuario

BELINEA

BELINEA 10 60 75 Manual de usuario

BELINEA

BELINEA 101911 Manual de usuario

BELINEA

BELINEA 101720 Manual de usuario

BELINEA

BELINEA 10 60 65 Manual de usuario

BELINEA

BELINEA 10 80 80 Manual de usuario

BELINEA

BELINEA 2025 S1 Manual de usuario

BELINEA

BELINEA 101725 Manual de usuario

BELINEA

BELINEA 10 19 20 Manual de usuario

BELINEA

BELINEA 10 Manual de usuario

BELINEA

BELINEA 1975 S1 Manual de usuario

BELINEA

BELINEA 101830 Manual de usuario

BELINEA

BELINEA 1945 G1 Manual de usuario

BELINEA

BELINEA 101935 Manual de usuario

BELINEA

BELINEA 10 17 15 Manual de usuario

BELINEA

BELINEA 10 30 50 Manual de usuario

BELINEA

BELINEA 2485 S1W Manual de usuario

BELINEA

BELINEA 101536 Manual de usuario

BELINEA

BELINEA CRT-Monitor Manual de usuario

BELINEA

BELINEA 101930 Manual de usuario

BELINEA

BELINEA 10 80 35 Manual de usuario

BELINEA

BELINEA 15 Manual de usuario

BELINEA

BELINEA 101927 Manual de usuario

BELINEA

BELINEA 10 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación