Belden ECX-1U Manual de usuario
ECX – 1U/2U
INSTALLATION GUIDE
ES: Visite nuestra pagina web www.belden.com para obtener el guía de instalación en español.
FR: Veuillez visiter notre site web au www.belden.com pour obtenir le guide d’installation en français.
ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 1 of 22
1U2U
TABLE OF CONTENTS
1. Precautions 3
2. Carton contents 4
2.1. Hardware kit contents 4
3. FX ECX accessories and tools required 5
3.1. FX ECX accessories 5
3.2. Tools required 5
4. Mounting the ECX housing 6
5. Changing the position of the rack mounting brackets (optional) 6-8
6. Housing features and manipulation 9
6.1. Opening and removal (optional) of the ECX doors [front and rear] 9
A. Front door 9
B. Rear door 10
6.2. Removal of the top covers 10
6.3. Removal of the sliding tray 11
6.4. Installation and removal of the ECX frames 11
6.5. Removal of the cassette guide 12
6.6. Installation of cable routing components 12
6.7. Installation of the external strain relief 13
6.8. Installation of the the internal strain relief 13
6.9. Removal of the patch cord management clips (optional) 13
7. Cable routing 14
7.1. Securing a distribution cable onto the internal strain relief 14
7.2. Installing distribution cable for field termination 14
A. Standard recommended procedure 14-15
B. Distribution cable attachement on the rear door (optional) 15
C. Break-out kit cable routing (optional) 16
ECX 1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 2 of 22
8. Installing distribution cable for ECX splice cassette 17
8.1. Standard recommended procedure 17
8.2. Optional recommended procedures 18
A. Distribution cable attachement on the angled external strain relief 18
B. Field termination with ECX accessories: splice cassette and frame 18
9. Proposed front patch cord management 19
9.1. Fiber patch cord management 19
9.2. Copper connectivity 19
10. ECX labeling 20
10.1. I.D. label card access, position and removal 20
10.2. Applying I.D. label 20
11. Securing the ECX 1U/2U (optional) 20-21
11.1. Securing the top covers 20
11.2. Securing the sliding tray 21
11.3 Lock kit installation 21-22
ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 3 of 22
1. Precautions
! WARNING: Never look at the end of a fiber that may be carrying laser light.
! CAUTION: Wearing safety glasses can prevent injuries (or accidents) related to handling chemicals, cables or working with sharp
pieces of glass.
! CAUTION: Avoid contact between broken glass fibers. These glass fiber fragments are sharp and can penetrate the skin easily.
The use of safety gloves is highly recommended.
! CAUTION: Maintain a clean work area by sweeping all the fiber debris and disposing of them appropriately.
ECX 1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 4 of 22
2. Carton contents
1. Removable top covers (2x)
2. Rear door
3.Housing
4.Front door
5.Sliding tray
6.Patch cord management clips
(3x for ECX 1U and 6x for ECX 2U)
7. Labels cards (2x)
8.Installation guide [ECX: Splice
cassette and 1U/2U QSG - not shown]
9. Hardware kit [not shown]
2.1. Hardware kit contents
1. Blank frames
2. Management clips
3. Intermediate strain relief
4. Internal strain relief
5. External strain relief [*R&L]
6. M4 x 5mm - Metric screw
7. #6-19 x ¼” - screw for plastic
8. #6-19 x ½” - screw for plastic
9. #12-24 - machine screw
10. #10-32 - machine screw
11. 4” self-locking cable tie
12. 7” self-locking cable tie
13. 8” Velcro cable tie
14. [3/6/12] I.D label ports
15. [8/16] I.D. label ports
16. Door lock opening cap
Contents quantity
Part # ECX 1U ECX 2U
1. 2x 4x
2. 8x 8x
3. 1x 2x
4. 1x 1x
5*.R= 1x, L= 1x R= 1x, L= 1x
6. 4x 4x
7. 4x 4x
8. 2x 2x
9. 4x 4x
10. 2x 2x
11. 4x 4x
12. 4x 4x
13. 4x 4x
14. 2x 2x
15. 2x 2x
16. 2x 2x
*R&L= Right and left sides
NOTE: Refer to section 10.2. to see detailed
illustrations of I.D. labels.
RL
1U label
1U label
1U2U
ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 5 of 22
3. FX ECX accessories and tools required
Please take note that the following products may be required depending on your application. These components are ordered separately.
For further information regarding ECX accessories, please visit our website at www.belden.com
3.1. FX ECX accessories
• FX ECX external strain relief right (1x)
and left (1x)
(ECX-1U2U-EXSTR)
• FX ECX angled external strain relief
(ECX-1U2U-EXSTRA)
• FX ECX internal strain relief
(ECX-1U2U-INSTR)
• FX ECX intermediate internal strain relief (2x)
(ECX-INTERSTR)
• Mini lock kit
(ECX-LOCKKIT)
• FX ECX managements clips (8x)
(ECX-MGTCLIPS)
• I.D. labels for 1U ports (2x)
(ECX-LBL-1U)
• I.D. labels for 2U ports (2x)
(ECX-LBL-2U)
NOTE: Refer to section 10.2. to see detailed illustrations of I.D. labels.
3.2. Tools required
• Phillips screwdriver
• Cutting pliers
ECX 1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 6 of 22
4. Mounting the ECX housing
This section shows how to install the ECX 1U/2U to a 19"rack or cabinet.
1. Insert the bottom screws into the rack as shown (use #12-24 or #10-32 screws provided in the hardware kit).
2.Install the housing to the rack and position the bottom slots of the mounting brackets onto the installed screws.
These screws will carry the weight of the housing during the installation.
3.Tighten the bottom screws firmly.
Insert and tighten the top screws.
5. Changing the position of the rack mounting brackets (optional)
Depending on your application, the ECX mounting brackets can be adapted to dierent positions.
1. Remove the bracket
2
1
ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 7 of 22
2.Identify the mounting hole location where the brackets will be installed.
Without brackets:
Standard position:
3” position:
Flush position:
= Mouting brackets installation areas.
3. Install the bracket by reusing the same screws.
ECX 1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 8 of 22
4. Mount the housing to the rack.
Standard mounting postion:
3” mounting positon overview
Flush mounting position overview
ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 9 of 22
6. Housing features and manipulation
This section explains accessibility features of the ECX housing and its components.
6.1. Opening and removal (optional) of the ECX doors [front and rear]
A. Front door
1. To open the door, press both latches downwards simultaneously.
2. To remove the door, press the bottom tab and slide the door to the left as shown.
ECX 1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 10 of 22
B. Rear door
NOTE: The rear door opens identically to the front.
To remove the rear door, bend the metal tab downwards and slide the door to the left.
6.2. Removal of the top covers
Remove the front or rear cover by pressing the side latches simultaneously.
NOTE: When the brackets are in the flush position, the front cover latches are inaccessible. However, the cover can be removed by pulling it with a
slight tug.
Otros manuales para ECX-1U
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Recinto de Belden
