Belco Tar River DRL-048 Manual de usuario
1
DRL-048
DRL-072
CROP SEEDER
Operator’s Manual
Rev. 8-2019
2
TABLE OF CONTENTS
INTRODUCTION…………………………………………………………………………………….……….3
SAFETY ………………………………………………………………………………………………...………. 3
SAFETY SIGNAL WORDS ………………………………………………………………….…………….4
GENERAL SAFETY GUIDELINES …………………………………………………………………....4
SAFETY DECAL CARE ………………………………………………………………………….………….5
BEFORE OPERATION ………………………………………………………………………….………….5
DURING OPERATION …………………………………………………………………………………. ..6
HIGHWAY AND TRANSPORT OPERATIONS ……………………..………………….………...7
ASSEMBLY……………………………………………………….…….……….………………………….9-12
OPERATING INSTRUCTIONS…..…………………………………………………………………….13
BEFORE BEGINNING…………. …………………………………………………………………..…….13
ADJUST SEEDCUP OUTPUT…………………………………………………………………………...13
SEEDING/FERTILIZING RATE ADJUSTMENT HANDLE………………………………….14
SEEDCUP SHUTOFF……………………………………………………………………………………….15
SEED CHARTS………………...……………………..……………………………………………..…..15-16
SEED DEPTH CONTROL……………………………..……………………………………………..…..16
LUBRICATION AND MAINTENANCE…..……..……………………………………………...…..17
PARTS BREAKDOWN ……………………………………………………………….……………….18-21
LIMITED WARRANTY ………………………………………………………………………………… 22
3
INTRODUCTION
Thank you for purchasing your DRL Crop Seeder. The DRL- is designed to be used in prepared
seeding conditions. It is not intended as a No-Till Drill. It is important to properly maintain and
keep in place all safety guards and shields that came with your Machine.
These seeders can seed corn, beans, oats, wheat, etc. The two boxes are equipment with closea-
ble slides for each row. The seeder is equipped with 2 separate boxes. Each is made with a
stainless steel box and nylon/plastic seed rollers to disperse seeds effectively and accurately.
TECHNICAL SPECIFICATIONS
• Suitable for drilling and fertilizing corn, beans, oats, etc. in level or gently rolling fields.
• The double disc coulters create an opening to fertilize and seed easily in tilled soil.
• The depth of seeding can be adjusted. Seeding quantity can be adjusted.
• The seeder can plant seeds, fertilize, roll and drag all at the same time.
SAFETY
It is important that you read the entire manual and to become familiar with this product before
you begin using it. This product is designed for certain applications only. The manufacturer
cannot be responsible for issues arising from modification. We strongly recommend this product
not be modified and/or used for any application other than that for which it was designed. If you
have any questions relative to a particular application, DO NOT use the product until you have
first contacted us to determine if it can or should be performed on the product.
Read and understand this manual and all safety signs before operating and maintaining. Review
the safety instructions and precautions annually.
DRL-072DRL-048
Weight 569 lbs. 625 lbs.
Req. HP Minimum 20 HPMinimum 20 HP
Seeding Rows 107
Row Spacing 7”7”
Seed/Ferlizer Rate See ChartSee Chart
Sowing Depth 3/4” - 2”3/4” - 2”
4
SAFETY SIGNAL WORDS
TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS
USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL
SAFETY AND THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE INSTRUC-
TIONS CAN RESULT IN INJURY OR DEATH.
THIS SYMBOL MEANS
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Safety of the operator is one of the main concerns in designing and developing a new piece of equip-
ment. Designers and manufacturers build in as many safety features as possible. However, every year
many accidents occur which could have been avoided by a few seconds of thought and a more careful
approach to handling equipment. You, the operator, can avoid many accidents by observing the fol-
lowing precautions in this section. To avoid personal injury, study the following precautions and insist
those working with you, or for you, follow them.
Replace any CAUTION, WARNING, DANGER or instruction safety decal that is not readable or is
missing. Location of such decals are indicated in this booklet.
Do not attempt to operate this equipment under the influence of drugs or alcohol.
GENERAL SAFETY GUIDELINES
Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages.
The appropriate signal word for each has been selected using the following guidelines:
DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death
or serious injury. This signal word is to be limited to the most extreme situations typically for ma-
chine components which, for functional purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death
or serious injury, and includes hazards that are exposed when guards are removed. It may also be
used to alert against unsafe practices.
CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result in minor
or moderate injury. It may also be used to alert against unsafe practices.
5
Review the safety instructions with all users annually.
This equipment is dangerous to children and persons unfamiliar with its operation. The operator
should be a responsible adult familiar with farm machinery and trained in this equipment’s operations.
Do not allow persons to operate or assemble this unit until they have read this manual
and have developed a thorough understanding of the safety precautions and of how it
works.
To prevent injury or death, use a tractor equipped with a Roll Over Protective System (ROPS). Do not
paint over, remove or deface any safety signs or warning decals on your equipment. Observe all safety
signs and practice the instructions on them.
Never exceed the limits of a piece of machinery. If its ability to do a job, or to do so safely, is in question
- DON’T TRY IT.
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become illegible.
• Replaced parts that displayed a safety sign should also display the current sign.
• Safety signs are available from your Distributor or Dealer Parts Department or the factory.
How to Install Safety Signs:
• Be sure that the installation area is clean and dry.
• Decide on the exact position before you remove the backing paper.
• Remove the smallest portion of the split backing paper.
• Align the decal over the specified area and carefully press the small portion with the exposed sticky
backing in place.
• Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in
place.
• Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing pa-
per.
• Carefully study and understand this manual.
• Do not wear loose-fitting clothing, which may catch in moving parts.
• Always wear protective clothing and substantial shoes.
• Assure that all tires are inflated evenly.
• Give the unit a visual inspection for any loose bolts, worn parts or cracked welds, and make neces-
sary repairs. Follow the maintenance safety instructions included in this manual.
• Be sure that there are no tools lying on or in the equipment.
• Do not use the unit until you are sure that the area is clear, especially of children and animals.
SAFETY DECAL CARE
BEFORE OPERATION
6
• Don’t hurry the learning process or take the unit for granted. Ease into it and become familiar
with your new equipment.
• Practice operation of your equipment and its attachments. Completely familiarize yourself and
other operators with its operation before using.
• Use a tractor equipped with a Roll Over Protective System (ROPS) and fasten your seat belt prior
to starting the engine.
• The manufacturer does not recommend usage of tractor with ROPS removed.
• Move tractor wheels to the widest recommended settings to increase stability.
• Securely attach to towing unit. Use a high strength, appropriately sized hitch pin with a mechani-
cal retainer and attach safety chain.
• Do not allow anyone to stand between the tongue or hitch and the towing vehicle when backing up
to the equipment.
• Children should not be allowed on the product.
• Clear the area of small children and bystanders before moving the feeder.
• If using a towing unit, securely attach feeder by using a hardened 3/4” pin, a metal retainer, and
safety chains if required. Shift towing unit to a lower gear before going down steep downgrades,
thus using the engine as a retarding force. Keep towing vehicle in gear at all times. Slow down for
corners and rough terrain.
• Make sure you are in compliance with all local and state regulations regarding transporting equip-
ment on public roads and highways. Lights and slow moving signs must be clean and visible by
overtaking or oncoming traffic when feeder is transported.
• Beware of bystanders, particularly children! Always look around to make sure that it is safe to
start the engine of the towing vehicle or move the unit. This is particularly important with higher
noise levels and quiet cabs, as you may not hear people shouting.
• NO PASSENGERS ALLOWED - Do not carry passengers anywhere on, or in, the tractor or
equipment, except as required for operation.
• Keep hands and clothing clear of moving parts.
• Do not clean, lubricate or adjust your equipment while it is moving.
• When halting operation, even periodically, set the tractor or towing vehicle brakes, disengage the
PTO, shut off the engine and remove the ignition key.
• Be especially observant of the operating area and terrain - watch for holes, rocks or other hidden
hazards. Always inspect the area prior to operation.
DURING OPERATION
7
• DO NOT operate near the edge of drop-offs or banks.
• DO NOT operate on steep slopes as overturn may result.
• Operate up and down (not across) intermediate slopes. Avoid sudden starts and stops.
• Adopt safe driving practices:
• Keep the brake pedals latched together at all times. NEVER USE INDEPENDENT BRAKING
WITH MACHINE IN TOW AS LOSS OF CONTROL AND/OR UPSET OF UNIT CAN RE-
SULT.
• Always drive at a safe speed relative to local conditions and ensure that your speed is low enough
for an emergency stop to be safe and secure. Keep speed to a minimum.
• Reduce speed prior to turns to avoid the risk of overturning.
• Avoid sudden uphill turns on steep slopes.
• Always keep the tractor or towing vehicle in gear to provide engine braking when going downhill.
Do not coast.
• Do not drink and drive!
• Comply with state and local laws governing highway safety and movement of farm machinery on
public roads.
• Use approved accessory lighting flags and necessary warning devices to protect operators of other
vehicles on the highway during daylight and nighttime transport. Various safety lights and devices
are available from your dealer.
• The use of flashing amber lights is acceptable in most localities. However, some localities prohibit
their use. Local laws should be checked for all highway lighting and marking requirements.
• When driving the tractor and equipment on the road or highway under 40 kph (20 mph) at night
or during the day, use flashing amber warning lights and a slow moving vehicle (SMV) identifica-
tion emblem.
• Plan your route to avoid heavy traffic.
• Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow
bridges, intersections, etc.
• Be observant of bridge loading ratings. Do not cross bridges rated lower than the gross weight as
which you are operating.
HIGHWAY AND TRANSPORT OPERATIONS
8
• Watch for obstructions overhead and to the side while transporting.
• Always operate equipment in a position to provide maximum visibility at all times. Make al-
lowances for increased length and weight of the equipment when making turns, stopping the
unit, etc.
• Pick the most level route when transporting across fields. Avoid the edges of ditches or gullies
and steep hillsides.
• Be extra careful when working on inclines.
• Maneuver the tractor or towing vehicle at safe speeds.
• Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious inju-
ry or death.
• Avoid loose fill, rocks and holes; they can be dangerous for equipment operation or movement.
• Allow for unit length when making turns.
• Operate the towing vehicle from the operator’s seat only.
• Never stand alongside of unit with engine running or attempt to start engine and/or operate
machine while standing alongside of unit.
• Never leave running equipment attachments unattended.
• As a precaution, always recheck the hardware on equipment following every 100 hours of oper-
ation. Correct all problems. Follow the maintenance safety procedures.
9
ASSEMBLY
Step 1. Support frame a few feet above floor
with blocks or a Tar River Implement han-
dler.
DRL-072
Align the double disc openers to the proper
7” spacing. It is easier to begin mounting the
U bolts that hold the Double Disc Assembly
on one end and align the next one on the
same bar 14” beside it. The Double Disc As-
semblies mounted on the back bar should
begin between the front. There will be 5 on
each bar.
DRL-048
Align the center rear Double Disc opener of
the machine using the 3pt. Support as a
guide. Then slide the two front middle ones
as far left and right as possible as in picture.
Then use these to adjust the remaining 14”
on center. There will be 4 on the front bar
and 3 on the rear.
Step 2. Mount hopper box with the lid
opening towards the front. DO NOT
TIGHTEN BOLTS AT THIS STEP
14”
7” 7”
10
Step 3. Separate the hoses which come with the machine. The 5 longer hoses are to be installed .from the
front seed cups to the rear double disc openers.
Step 4. Use electrical tape (not provided) to secure the hos-
es to the seed cups.
Step 5. Insert the shut off flaps into each of the seed cups.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sembradora de Belco
