Beko DSN53100X Manual de usuario
Read “Safety Instructions” section first!
Quick Guide
Operating the product
1-
2-
3-
4-
5-
6-
7-
8-
9-
10-
Rinse Aid indicator
Salt indicator
On/Off Control light
Handle
On/Off/Programme Selection key
Start/Pause/Cancel key
Programme Follow-up lights
Time Delay key
Time Delay indicator
Half Load function
1 2 3
78910
46
5
12345
Eco *** Intensive Clean&Shine Quick&Shine Mini
50 ºC 70 ºC 65 ºC 60 ºC 35 ºC
Suitable for washing
dishes with normal
amount of soil. It is
the most efficient
program in terms of
combined power and
water consumption.
This is used for
assessing the
compliance with EU's
eco-design directive.
Suitable for heavily
soiled dishes, pots
and pans.
Daily washing
programme for
normally soiled
dishes.
Daily washing
programme for
normally soiled
dishes in the fastest
way.
Suitable for lightly
soiled daily dishes
that are scraped or
pre-cleaned.
Medium High Medium Medium Low
+++ - -
+++++
++++ -
210 120 120 58 30
11,5 17,6 16,2 11,8 11,8
1,03* / 1,037** 1,65 1,38 1,20 0,80
Loading Capacity: 13
Programme Data and Average Consumption Values Table
* : EN 60436:2016 ** : EN 60436:2020 The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
*** Reference programme for testing institutes. The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and
using the test programme. The values given for programmes other than Eco 50°C programme are indicative only.
Programme number
Programme name
Cleaning temperature
Degree of Soiling
Energy (kWh)
Prewash
Wash
Dry
Duration (min)
Water (I)
#
Sensitivity: Public
Programme Table
Quick Guide
Adjusting the water softening system
•Unpack the test strip.
•Open the tap and let the water flow for approx. 1
minute.
•Dip in the test strip into the water for 1 second.
•Take out the strip from the water and shake it.
•Wait for 1 minute.
•Make the necessary adjustment according to the test
strip.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
After detecting the water hardness:
1. When the Programme Selection knob is in Off position, press and hold the Start/Pause/
Cancel key and turn the Programme Selection knob clockwise by one level within 5
seconds. Once this time has elapsed, the product will enter the regeneration setting mode.
2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator
adjustment mode is activated.
3.To adjust the new Water Hardness Level, move the Programme Selection knob to the
position that is suitable for your supply water. (see, Water Hardness Level Adjustment
Table)
**Programme Selection knob rotates in 5 steps regardless of the number of the
programmes contained on the machine.
4. Press “Start/Pause/Cancel” key for once to store the level you have selected.
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
Quick Guide
Adjusting the water softening system
Quick Guide
1876720100-AA_BEKO_A5_EN/06-05-20.(17:23)
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF
Position of
programme
selection
knob*
Water Hardness Level Indicator
Level 0 0-5 0-4 0-8 1 Washing lamp on the panel will
illuminate.
Level 1 6-9 5-7 9-13 1
Level 2 10-15 8-12 14-22 2 Drying lamp on the panel will
illuminate.
Level 3 16-19 13-15 23-27 3 End lamp on the panel will illuminate.
Level 4 20-24 16-19 28-34 4 Washing, Drying and End lamps on
the panel will illuminate.
Level 5
25-62 20-50 35-90 5
Washing, Drying and End lamps
on the panel will ash at 1-second
intervals.
•If the hardness level of the water that you use is above 50°dH or if you are using well
water, than it is recommended to use filter and water purification devices.
•If the hardness level of the water that you use is below 7°dH, there is no need to use
salt in your dishwasher. In this case, the Salt Indicator light on the control panel of your
dishwasher will light continuously.
•If the water hardness is set to level 1, the Salt Indicator will light continuously although
it is not necessary to use salt. If you use salt under this condition, salt will not be
consumed and the lamp will not illuminate.
When moving, you will need to set the water hardness level of your dishwasher again
according to the information above, depending on the water hardness of the place you
have moved to. If the water hardness level of your machine is adjusted previously, your
machine will display the most recent hardness level adjustment.
Tabla de contenidos
Otros manuales de Arandela de Beko
Beko
Beko WUE 7636 XCW Manual de usuario
Beko
Beko WUE 5411 XWW Manual de usuario
Beko
Beko WCV9649XWST Manual de usuario
Beko
Beko WUE 8736 XN Manual de usuario
Beko
Beko WTK104151W Manual de usuario
Beko
Beko WMB 81442LW Manual de usuario
Beko
Beko WMB 91243LW Manual de usuario
Beko
Beko WRE6511BWW Manual de usuario
Beko
Beko WMD 25125 M Manual de usuario
Beko
Beko WTZ81435BI Manual de usuario
Beko
Beko WMB 71032 PTM Manual de usuario
Beko
Beko B3WT5941WS Manual de usuario
Beko
Beko WTG841M2W Manual de usuario
Beko
Beko WTG761M1W Manual de usuario
Beko
Beko WMD 77147 Manual de usuario
Beko
Beko WTA 9712 XSW Manual de usuario
Beko
Beko WMB 61001 Y+ Manual de usuario
Beko
Beko WNF 8447 ACE50 Manual de usuario
Beko
Beko WMA 727 S Manual
Beko
Beko WTE12744MGSTN Manual de usuario
