Beijer Electronics SUEN00403 Manual de usuario

Quick Start Guide

MELSEC QnUDE Ethernet to X2 series

SUEN00403 – Quick start Ethernet communication

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

2 (8)

Normal.dotm, 2020-09-09

1 Function and area of use

This document explains how to set up a QnUDE to communicate with X2/BoX2 over Ethernet.

2 About this Startup document

This Startup document should not be considered as a complete manual. It is an aid to be able to

Startup a normal application quickly and easily.

Use the following hardware, software, drivers and utilities in order to obtain a stable application:

In this document we have used following software and hardware

 iX Developer 2.40 SP4 or later

 X2/BoX2 series

 GX Works 3

 QnUDE CPU with built in Ethernet

For further information refer to

 Beijer Electronics knowledge database, HelpOnline

This document and other Startup documents can be obtained from our homepage.

Please use the address support.europe@beijerelectronics.com for feedback about our Quick Start

documents.

This documentation (below referred to as ‘the material’) is the property of Beijer Electronics. The holder or user has a non-

exclusive right to use the material.

The holder is not allowed to distribute the material to anyone outside his/her organization except in cases where the material is

part of a system that is supplied by the holder to his/her customer.

The material may only be used with products or software supplied by Beijer Electronics.

Beijer Electronics assumes no responsibility for any defects in the material, or for any consequences that might arise from the use of

the material.

It is the responsibility of the holder to ensure that any systems, for whatever applications, which is based on or includes the

material (whether in its entirety or in parts), meets the expected properties or functional requirements.

Beijer Electronics has no obligation to supply the holder with updated versions.

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

3 (8)

Normal.dotm, 2020-09-09

3 Table of Contents

1 Function and area of use ......................................................................................... 2

2 About this Startup document .................................................................................... 2

3 Table of Contents .................................................................................................. 3

4 Setting in QnUDE Ethernet communication .................................................................. 4

5 Setting in X2/BoX2 Ethernet communication................................................................. 5

Create a new project in iX Developer ................................................................... 5

Driver setting (MC Protocol) .............................................................................. 7

6 About Beijer Electronics ......................................................................................... 8

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

4 (8)

Normal.dotm, 2020-09-09

4 Setting in QnUDE Ethernet communication

The following chapter describes how to setup the Ethernet communication.

Adjust the Built-in Ethernet port open settings located in PLC-Parameter.

Enter IP address, Subnet Mask and (if used) Default Gateway.

Port no. in decimal.

Select protocol UDP and set station port number (setting range: 1025 to 4999, 5010 to 65534. Do not use port

5000 to 5009 since they are used internally by the system. For multiple HMI’s connected to one controller, use

a uniques port for each HMI to reduce the workload.

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

5 (8)

Normal.dotm, 2020-09-09

5 Setting in X2/BoX2 Ethernet communication

The following chapter describes how to setup the Ethernet communication in iX Devloper using the

MC Protocol driver connecting to QnUDE.

Create a new project in iX Developer

Start iX Developer, select “Create New Project”:

Select target:

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

6 (8)

Normal.dotm, 2020-09-09

When creating a new project or adding/changing controller

Select MC Protocol:

Type path and project name:

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

7 (8)

Normal.dotm, 2020-09-09

Driver setting (MC Protocol)

Double click on “Tags”:

Select “Controllers” - “Settings…”:

Select “UDP” and “Hexadecimal”:

Type IP address and port number stated in GX Works3:

Tip!

Help about driver, click on “Help”

Press OK.

QnUDE Ethernet – X2/BoX2 series SUEN00403 2020-10

Beijer Electronics AB  a Beijer Electronics Group company

Head Office Subsidiaries

Beijer Electronics AB Click here for details

P.O. Box 426, Stora Varvsgatan 13a

SE-201 24 Malmö, SWEDEN

Telephone +46 40 35 86 00

Reg no. 556701-4328  VAT no SE556701432801  www.beijerelectronics.com  info@beijerelectronics.com

8 (8)

Normal.dotm, 2020-07-01

6 About Beijer Electronics

Beijer Electronics is a multinational, cross-industry innovator that connects people and

technologies to optimize processes for business-critical applications. Our offer includes operator

communication, automation solutions, digitalization, display solutions and support. As experts in

user-friendly software, hardware

and services for the Industrial Internet of Things, we empower you to meet your challenges

through leading-edge solutions.

Beijer Electronics is a Beijer Group company. Beijer Group has a sale over 1.6 billion SEK in

2019 and is listed on the NASDAQ OMX Nordic Stockholm Small Cap list under the ticker

BELE. www.beijergroup.com

Global offices and distributors

!Optional details if one wants to add local contact information in the document!

Local office Telephone E-mail

Sweden +4640358600 info.se@beijerelectronics.com

China NORWAY TAIWAN

Shanghai Drammen Taipei

DENMARK SOUTH KOREA TURKEY

Roskilde Seoul Istanbul

FRANCE SWEDEN UNITED KINGDOM

Paris

Göteborg

Malmö

Stockholm

Nottingham

GERMANY USA

Nürtingen

Salt Lake City

Tabla de contenidos

Otros manuales de Accionamiento de CC de Beijer Electronics

Beijer Electronics

Beijer Electronics BFI-E3 Series Manual de instalación y operación

Beijer Electronics

Beijer Electronics X2 pro Manual de usuario

Beijer Electronics

Beijer Electronics Korenix JetNet 7612G Manual de usuario

Beijer Electronics

Beijer Electronics BFI-P2 Manual de instalación

Beijer Electronics

Beijer Electronics BFI-H3 Manual de instalación

Manuales populares de Accionamiento de CC de otras marcas

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manual de usuario

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manual de lista de piezas

Chamberlain Garog

Chamberlain Garog D Series Manual de usuario

Parker

Parker PDS Series Manual de usuario

Festo

Festo DGC G Series Guía de configuración

Binks

Binks QS-5012-1-CE Manual de usuario

Danfoss

Danfoss VLT 2800 Series Hoja de especificaciones

ABB

ABB ACQ580-01 Series Manual de instalación

YASKAWA

YASKAWA CANopen SI-S3 Manual de usuario

GE D20A6 Manual de usuario

Unex

Unex MC-D-250-1000-050W-TW Manual de usuario

Geckodrive

Geckodrive G213V Manual de usuario

ABB

ABB RSYC-01 Manual de usuario

Rockwell Automation

Rockwell Automation PowerFlex 700S Manual del propietario

WEG

WEG DeviceNet CFW500 Manual de usuario

Siemens

Siemens SINAMICS G Hoja de datos

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento

SOMFY

SOMFY JR RU 30 Manual de usuario