Bedrock UPS.500 Manual de usuario
Revision 8 September 2021
Bedrock OSA
UPS.500
User Manual
Copyright © 2021 Bedrock Automation Platforms, Inc. All rights reserved.
This manual is provided solely for informational purposes in connection with the authorized installation, use, and maintenance
of Bedrock Automation’s products. The information in this manual is subject to change without notice. The most recent
versions of our manuals are posted on our website at https://bedrockautomation.com/support/support-documentation. No
part of this publication may be distributed or transmitted in any form or by any means for charge or for use other than in
connection with the authorized installation, use, and maintenance of Bedrock Automation’s products, without the prior
written permission of Bedrock Automation.
Disclaimer
This manual is provided “as is” without any representations or warranties, express or implied. To the extent allowed by law,
Bedrock Automation makes no, and disclaims any and all, representations or warranties with respect to this manual and the
information and materials provided herein, including without limitation, any implied warranties of non-infringement,
merchantability, fitness or sufficiency for a particular purpose, or arising from the course of dealing, usage, or trade. Although
we use reasonable efforts to include accurate, up-to-date, and comprehensive information, Bedrock Automation does not
warrant the information in this manual is correct, current, or complete. The examples and diagrams in this manual are included
solely for illustrative purposes, and throughout this manual we use notes to make you aware of safety considerations. However,
because of the many variables and requirements associated with any installation, Bedrock Automation cannot assume
responsibility or liability for actual use based on the examples, diagrams, or information included in this manual. Nothing in this
disclaimer excludes or limits any warranty that is unlawful to disclaim, exclude, or limit.
Under no circumstances will Bedrock Automation or its employees, officers, directors, agents, successors, or assigns be liable,
under any contract, tort (including negligence), strict liability or other legal or equitable theory, whether or not foreseeable or
foreseen, for any special, incidental, exemplary, indirect, or consequential damages, including without limitation, any cost of
rework, retesting, procurement of substitute goods, removal and reinstallation of goods, business interruption costs, or lost
revenue, profits, or data, regardless of whether Bedrock Automation has been advised or is aware of the possibility of such
damages or any remedy fails of its essential purpose. Nothing herein will exclude or limit Bedrock Automation’s liability in
respect of any: (1) death or personal injury caused by Bedrock Automation’s negligence; (2) fraud or fraudulent
misrepresentation on the part of Bedrock Automation; or (3) matter which it would be illegal or unlawful for Bedrock
Automation to exclude or limit, or to attempt or purport to exclude or limit, its liability.
By using this manual, you agree these disclaimers, exclusions, and limitations of liability are reasonable. If you do not think they
are reasonable, do not use this manual.
For further information, contact:
Bedrock Automation Platforms, Inc.
171 Forbes Boulevard, Suite 1000
Mansfield, Massachusetts 02048
(781) 821-0280
www.bedrockautomation.com
Trademarks
Bedrock®, Black Fabric®, and OSA® are registered trademarks of Bedrock Automation Platforms, Inc. All other trademarks are the
properties of their respective owners.
Contents
9/2/21 Bedrock UPS.500 User Manual - BRDOC120_008 i
Contents
Safety Warning and Precautions ......................................... iv
Warnings .................................................................................................................iv
Cautions...................................................................................................................iv
Bedrock UPS.500 Overview ................................................. 1
UPS.500 Installation ........................................................... 7
Important User Information..................................................................................7
Hazardous Location Information .................................................................7
Environment and Enclosure..........................................................................8
Installation Configurations....................................................................................8
Panel Mount Installation........................................................................................9
Pipe Mount Installation........................................................................................10
Installing the UPS..................................................................................................11
UPS.500 Wiring................................................................ 20
Important User Information................................................................................20
Power and Relay Cables........................................................................................20
Cable Pin Out Information ..................................................................................22
Configuration and Status .................................................. 25
Network Setup .......................................................................................................25
Bedrock IDE Device Management .....................................................................25
Displaying UPS.500 Data ...........................................................................26
Configuration Data .....................................................................................28
Overcurrent Behavior ..........................................................................30
Recovery Threshold..............................................................................31
Brownout..............................................................................................32
Battery Power.......................................................................................32
Trickle Charge......................................................................................32
Cell Values....................................................................................................32
Diagnostic Data...........................................................................................33
Logging Information....................................................................................35
Log Entry Format.................................................................................35
Logged Events.......................................................................................36
Logged Faults .......................................................................................38
Additional Items Logged by the UPS.500 ...........................................40
Storing UPS Logging Information in an ODBC Database.................42
Updating UPS Firmware.............................................................................42
OPC UA..................................................................................................................43
Contents
ii Bedrock UPS.500 User Manual - BRDOC120_008 9/2/21
UPS.500 Status LEDs ............................................................................................44
UPS.500 Specifications............................................................A-1
UPS.500 Electrical Specifications..........................................................................1
UPS.500 Hold Up Time..........................................................................................1
UPS.500 Environmental Specifications................................................................2
UPS.500 General Specifications ............................................................................2
Low Voltage Shutoff ................................................................................................2
Part Numbers ..........................................................................B-1
Certifications, Approvals, and Testing ...................................C-1
CE Testing ................................................................................................................1
IEC Environmental Testing....................................................................................1
Underwriters Laboratories (UL) Safety Compliance..........................................1
FCC Testing..............................................................................................................1
EMP Testing.............................................................................................................2
Achilles Certification..............................................................................................2
Log Index Table...................................................................... D-1
Acronyms.................................................................................E-1
9/2/21 Bedrock UPS.500 User Manual - BRDOC120_008 iv
Safety Warning and Precautions
Observe the following warnings and precautions during installation and use of the
UPS.500.
Warnings
WARNING: Prior to connecting the cables, refer to the
UPS.500 Wiring chapter for important electrical and safety
information.
WARNING: Select an input power supply with a rating that is
greater than the UPS.500 power consumption which can be
calculated as follows:
(output voltage x configured Current Limit) +
configured Charge Power
Cautions
CAUTION: Never attempt to open the UPS.500 enclosure. The
enclosure is securely sealed. Opening the enclosure will void
the warranty and cause the UPS.500 to be inoperable.
CAUTION: Always use an appropriate fuse on the power in
and power out connections.
CAUTION: The UPS.500 contains lithium-ion batteries. The
output port may carry voltage even when the UPS.500 is not
connected to a power source.
CAUTION: Each contact in the input and output connectors is
rated for 6 amps at 25°C. All wires must be connected to the
load in parallel. Do not use separate wires. Do not connect
separate wires to separate loads. Failure to follow these
instructions will void any warranty.
Safety Warning and Precautions
9/2/21 Bedrock UPS.500 User Manual - BRDOC120_008 v
CAUTION: For both the panel-mount and pipe-mount
configurations, it is required that the UPS.500 universal
mounting bracket is grounded.
Chapter 1
1 Bedrock UPS.500 User Manual - BRDOC120_008 9/2/21
Bedrock UPS.500 Overview
The Bedrock UPS.500 is an Ethernet enabled, 24 V 12 Ah lithium-ion uninter-
ruptible power supply (UPS) designed for use in industrial automation applica-
tions. Product specifications, installation instructions, and operating information
are included in this manual.
NOTE: To avoid depleting UPS.500 batteries, the UPS.500
must not be stored without being powered on for
more than ten years. Power up the UPS.500 for at least
four hours within a ten year period to avoid depletion
of the UPS.500 batteries.
NOTE: Remove the enable connector while storing the
UPS.500.
The Bedrock UPS.500 supports 10/100 Mbit Ethernet IPv4 and IPv6
communication. Network clock synchronization is provided using the IEEE
1588 Precision Time Protocol (PTP) for devices that support the protocol.
A real-time clock (RTC) provides up to 21 days of hold up time in the event of a
loss of UPS.500 battery power (product revision D or later).
An OPC UA compliant server provides access to diagnostic and status
information and configuration parameters. OPC UA tags are available using an
OPC UA client or the Bedrock IDE.
The UPS.500 can be installed in either panel or pipe mount configurations. The
enclosure is compliant with IP66/67 (dust tight and protection against water jets
and immersion) and NEMA ratings 4, 5, and 6 (water tight, dust tight, and
immersible).
Bedrock Automation has received several certifications for FCC, CE, IEC, and
EMP testing as well as UL approval for Industrial Control Equipment (UL 508).
See Appendix C, Certifications, Approvals, and Testing for a complete list.
Additional features include:
• tri-colored status LED and network activity LEDs
• an enable connector that can be removed to protect against
inadvertent power up
• two type C relay outputs.
Bedrock UPS.500 Overview Chapter 1
9/2/21 Bedrock UPS.500 User Manual - BRDOC120_008 2
Ports for power cables, communication connections, and the enable connector
are shown in Figure 1-1.
Important
Power cabling must be rated for PLTC with AWG 16.
Relay cabling must be rated for MC, MV, or PLTC with AWG 20.
Figure 1-1 Ports on the UPS.500
Power
Out
Power
In Relay
Enable
Ethernet
Note: Bedrock part no. CI00100 or Phoenix
Contact part no. 1656990 must be
used for the Ethernet connector in
order to maintain the IP66/IP67 rating.
Note: A shielded
Ethernet cable is
required.
Chapter 1 Bedrock UPS.500 Overview
3 Bedrock UPS.500 User Manual - BRDOC120_008 9/2/21
Figure 1-2 shows the UPS.500 with the enable connector.
NOTE: The enable connector must be connected before the
power input cable for the UPS.500 to be operable.
NOTE: Remove the enable connector prior to transporting the
UPS.500.
Figure 1-2 Installed Enable Connector
Enable
Connector
Use Bedrock Part No. MI00097 when ordering the Enable Connector
Bedrock UPS.500 Overview Chapter 1
9/2/21 Bedrock UPS.500 User Manual - BRDOC120_008 4
A block diagram for the UPS.500 is shown in Figure 1-3.
Figure 1-3 UPS.500 Block Diagram
Dual
Ideal
Diode
Controller
Dual
Relays
Regulator
Line
In
Enable
DC
Out
Ethernet
Port
Battery
Pack
Charging
Circuit
Microcontroller
Ethernet
Controller
Relay
Input A
Input B
Output
Control
Control
Otros manuales para UPS.500
3
Tabla de contenidos
Otros manuales de Unión Postal Universal de Bedrock
Manuales populares de Unión Postal Universal de otras marcas
Pylontech
Pylontech Victron & Pylontech US5000 Manual de usuario
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario
Mecer
Mecer ME-1000-WTU Manual de usuario
Mustek
Mustek PowerMust 530(B) Plus Manual de instalación y operación
Emerson
Emerson Liebert NXL series Manual de usuario
MAKELSAN
MAKELSAN BOXER SERIES Manual de usuario
