BEC Integrated Solutions Cat-5 Manual de instalación
1
User Guide and
Programming Instructions
Video Intercom Systems (Cat-5)
BEC Integrated Solutions - Williamsville, New York - 716-689-0871
2
Getting Started
Video Intercom Systems (Cat-5)
Congratulations on your new Video Intercom System! At BEC Integrated Solutions, we are proud to provide
secure, reliable solutions for your home or business. This manual is to help to answer any operational questions
you might have throughout your system’s lifetime.
Door Entry
The door panel included with your system should have been installed and
programmed to ring upon entering an apartment/unit number using
the pin-pad (Ex. 101, 203, etc.). Once entered, the unit will ring until
answered at the respective room station. When answered, speak as
you would normally.
By default the call time is 45 seconds. Press any button to extend the call
length.
The person at the indoor station may press the unlock key during the call to
grant entry. Press the ‘#’ sign to cancel a call or any action at any
time.
To gain entry to the building using the RF Reader, swipe the key fob or key
card given by the owner in front of the reader and the door will
click open.
To gain entry to the building using the Public Access Code (provided by the
installer/owner) Press 9* then enter the public password
(by default the code is 8888) (Ex. 9* 8888)
To gain entry to the building using the Residential Access Code (provided by
the installer/owner, this code
can
be changed) Press 8*, enter the room number, then the
assigned password (Ex. For room 101, with password ‘1234’, Press 8* + 0101 + 1234).
To CHANGE your Residential Access Code, press 5*, enter the room number, type the original
password, then type your new password. (Ex. For room 101, Press 5* + 0101 + 1234 + 4321)
3
Indoor Monitor
Video Intercom Systems (Cat-5)
The indoor monitor included with the system has four illuminated buttons on the face, and three scrolling
adjusters on the edge for Volume, Brightness, and Contrast.
1. Alarm/Concierge (If Applicable)
2. Monitor
3. Unlock
4. Talk/Answer
For an incoming call, press Talk to answer then
talk as you would normally.
You may press Unlock only during the
initial ring
or
during the call
to release the door latch to al-
low entry.
Press the Monitor button to view the camera at
the door station any time the monitor is off
To change the ringtone, press and hold Unlock until you hear the tone, then press Alarm/Concierge to cycle
through the different ringtones. Once you’ve chosen the tone, press Unlock to save your selection.
If your system includes the optional Picture Memory room station, there are 5 buttons (Menu, Up, Down, Left,
Right) on the side of the panel for controlling the On-Screen Display. With this feature, the panel will
take one still image for each call that is received at that station. While the display is active, you can
scroll through past images using the controls. You may also adjust settings (date/time, display settings,
etc.) using the on screen menu.
We hope you enjoy your system, and if you have any questions or need troubleshooting help,
please call our technical support line. Thank you for your business!
4
5225 Sheridan Drive
Georgetown Square
Williamsville, NY 14221
Phone: 1-716-689-0871
Toll-Free: 1-888-556-3998
http://www.becintegrated.com
Revised 9/15/2016
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de BEC Integrated Solutions
