Only suitable if the approved vehicles are fitted with 3
point retractor safety-belts, approved to UN/ECE
Regulation No.16 or other equivalent standards.
1
2Pass car safety waist belt through the groove of
Easymaxi Base.
Check that the cars belt is not twisted.
Then fasten the belt to car seat main buckle.
Pull on car safety belt to check for security.
3Place child's seat into the attachment device of
Easymaxi Base.
Lock will automatically engage.
WARNING: Check that the child's seat attachment
devices are correctly engaged before use.
4Then pass cars shoulder belt through the belt slit at the
back of the child's seat, making sure there is no slack.
5 Place child in child's seat.
WARNING: Always use the restraint system.
Then lower carrying handle of child's seat, against
the car seat. NB: Check child's seat for security.
6 Remove shoulder belt
from the belt slit at the back of the child's seat.
7Remove child's seat first by putting handle of child's
seat in the carrying position.
Then push in button on back of child's seat and lift
child's seat away from Easymaxi Base.
Place Easymaxi Base on car seat as shown.
TO REMOVE CHILD'S SEAT:
READ THESE INSTRUCTIONS
CAREFULLY BEFORE USE AND
KEEP THEM FOR FUTURE REFERENCE
ENGLISH
GBR
READ THESE INSTRUCTIONS
CAREFULLY BEFORE USE AND
KEEP THEM FOR FUTURE REFERENCE
