02 Instructions
This product is suitable for 7mm hot-melt adhesive stick, please do not
insert hot-melt adhesive stick of other specifications.
Corded version：Be sure to select appropriate power supply (power supply
voltage DC5V, power supply current ≥ 2A)
(Mobile phone charger and charging treasure can be used). Connect the glue
gun to the power supply equipment with the power supply cable.
Battery version：Please ensure that the equipment has sufficient power
In the shutdown state, press and hold the switch button for 2S to start
the product.
When the machine is turned on, long press the switch button for 2s to
turn off the product.
If the product is not used for any operation within 3 minutes, the product
will automatically shut down.
Insert the glue stick, after starting the product, wait for the green light of the
indicator to be on (the waiting time is about 30 s), after the pre heating is
completed, press the trigger to release the glue.
Apply the hot melt adhesive to the object to be bonded, press it for a period
of time, and the bonding is completed after the hot melt adhesive has solidified.
You can use the mobile phone charger, power bank, computer USB interface
and other power supplies that can output 5V DC voltage to charge this product.
ON-OFF
Usage method
Charging (applicable to lithium battery version)※
If the product has not been used for a long time, please fully charge the product
