Beats Solo Pro Manual de programación

Sound troubleshooting–

headphones and earphones

aving trouble with your audio? Find answers here.

Snapping, crackling, popping, or no audio on one side

1. Make sure the 3.5 mm audio jack is fully plugged in. The straight input connects to your

headset, and the L-shaped input connects to your audio device.

2. Check that your audio source is on and working.

3. If your audio source is a computer or laptop, try adjusting the configuration settings.

4. If you still hear distorted sound, try a different audio source and an alternate cable.

Volume too high

Turn the source volume down.

Phone not responding to button presses

Make sure that the headset plug is securely connected. For multi-press functions, vary

the speed of presses when you use the remote/mic.

Compatibility issues

Remember to install the latest software updates on your device. The inline remote/mic

may have limited functionality with devices that don’t run iOS.

Microphone does not pick up sound

oMake sure that the headset plug is securely connected and that the socket is clean and clear.

oCheck that the microphone—located on the back of the remote—isn’t blocked or covered.

oMake sure the straight-end of the plug is connected to the headphones and the angled L-

shaped plug is connected to the audio source.

oIf you're using your Beats with a computer, make sure that your computer microphone is set to

the correct input source.

If you can't connect to your wireless

Beats product

Here's how to troubleshoot the Bluetooth connection between your Beats product and

your iPhone, iPad, iPod touch, Mac, or other device.

Check the location

Place your Beats product and your paired device within 30 feet of each other. Move

both devices away from other Bluetooth devices, microwaves, wireless routers, and

other electronics.

Check the sound settings

On your iOS device, go to Settings > Bluetooth and select your Beats.

On your Mac, choose Apple ( ) menu > System Preferences, click Sound, then select

your Beats product in the Output and Input panes.

On your PC, go to the sound settings and select your Beats as the playback/recording

device.

Check the volume

1. Make sure that both your Beats product and your Bluetooth device are charged and turned on.

2. Play a track that you downloaded to your device, not streaming audio.

3. Increase the volume on your Beats product and on the paired Bluetooth device.

Use Forget Device, then pair your Beats again 
4. Disconnect your Beats product. 
On your iOS device, go to Settings > Bluetooth, tap the i next to the name of your Beats 
product, then tap Forget This Device. 
On your Mac, choose Apple ( ) menu > System Preferences, click Bluetooth, select your Beats 
product, click the X, then choose Forget Device. 
5. Pair your Beats product again. 
Reset your Beats product, then pair them again 
Reset your headphones, reset your earphones, or reset your speakers. Then pair your 
Beats product with your device again. 
 
Pair your Beats product 
Follow the pairing instructions for your Beats product: 
oStudio3Wireless 
oSolo3Wireless 
oBeatsx
oPill+
oPowerbeats3Wireless 
oBeatbox Portable 
oPill 1.0, Pill 2.0 
oPowerbeats2Wireless 
oStudio Wireless 
oWireless 
If you still need help 
If you hear distorted sound, learn how to troubleshoot audio issues with your Beats 
speakers or with your Beats headphones or earphones. 
 
Reset your Beats on-ear or over-ear 
headphones 
Share via Email(opens in new window) 
Share via link(opens in new window) 
Print 

If you're having sound, Bluetooth, or charging issues with your headphones, try

resetting them.

Solo Pro

Studio3Wireless

Studio or Studio Wireless

Solo3Wireless

Solo2Wireless

Solo Wireless

Reset Solo Pro

1. Hold down the mode button and volume down button for 10 seconds.

2. When the LED flashes red, release the buttons.

Your headphones are now reset and ready to be set up with your devices again.

Reset Studio3Wireless

3. Hold down the power button and volume down button for 10 seconds.

4. When the Fuel Gauge flashes, release the buttons.

Your headphones are now reset and ready to be set up with your devices again.

Reset Studio or Studio Wireless

5. Press and hold the power button for 10 seconds.

6. Release the power button.

7. All of the Fuel Gauge LEDs blink white, then one LED blinks red. This sequence happens three

times. When the lights stop flashing, your headphones are reset.

Your Studios will automatically power on after a successful reset.

Reset Solo3Wireless

8. Hold down the volume down button and the power button for 10 seconds.

9. When the Fuel Gauge flashes, release the buttons.

Your headphones are now reset and ready to be set up with your devices again.

Reset Solo2Wireless

10. Make sure your headphones are not plugged in to your USB charging cable.

11. Press and hold the power button for 10 seconds.

12. Release the power button.

13. All of the Fuel Gauge LEDs blink white, then one LED blinks red. This sequence happens three

times. When the lights stop flashing, your headphones are reset.

Reset Solo Wireless

14. Switch off the headset.

15. Hold the multifunction and volume down buttons for eight seconds.

16. The red and blue indicator lights alternate three times.

Other things you can try

Still having issues with your headphones? Try these things next:

oTry using another power source or a different cable.

oLearn about sound troubleshooting for headphones or Bluetooth troubleshooting.

oUse the Beats Updater to get the latest firmware. If you have Solo3headphones that you set up

with an iPhone using iOS 10, you automatically receive the latest firmware.

Otros manuales para Solo Pro

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Auriculares de Beats

Beats

Beats Beats Solo3 Wireless Manual de usuario

Beats

Beats Beats Dr. Dre Solo Manual de usuario

Beats

Beats powerbeats2 wireless Manual de usuario

Beats

Beats PowerBeats Sport Manual de usuario

Beats

Beats MIXR Manual de usuario

Beats

Beats iBeats MH IBTS IE WH CT Manual de usuario

Beats

Beats powerbeats 2 B0516 Manual de usuario

Beats

Beats Solo 2 Manual de usuario

Beats

Beats powerbeats2 wireless Manual de usuario

Beats

Beats Powerbeats3 Guía de seguridad

Beats

Beats Solo HD Manual de usuario

Beats

Beats STUDIO 3 WIRELESS Manual de usuario

Beats

Beats Beats Solo3 Wireless Manual de usuario

Beats

Beats Tour2 Manual de usuario

Beats

Beats Headphones Manual de usuario

Beats

Beats Solo Pro Manual de usuario

Beats

Beats Beats Studio Manual de usuario

Beats

Beats Solo 2 Manual de usuario

Beats

Beats powerbeats2 wireless Manual de usuario

Beats

Beats Studio Wireless Manual de usuario

Beats

Beats Headphones Manual de usuario

Beats

Beats Beats Studio Manual de usuario

Beats

Beats Wireless Manual de usuario

Beats

Beats In-Ear Headphones Manual de usuario

Manuales populares de Auriculares de otras marcas

Sony

Sony MDR-NC8 Manual de usuario

AUSounds

AUSounds AU-Stream Manual de usuario

ENERGY SISTEM

ENERGY SISTEM Style 7 Manual de usuario

Philips

Philips SHE3622 Manual de usuario

Insignia

Insignia NS-CAHBTSPORT Manual de usuario

Movie Vision

Movie Vision HP-400 Manual de usuario

MobiFren

MobiFren SM Pro Manual de usuario

Motorola solutions

Motorola solutions PMLN8120 Manual de usuario

Jaybird

Jaybird freedom Guía de instalación

Sony

Sony MDR-ED12LP Manual de usuario

HiFuture

HiFuture Tidy Buds Pro Manual de usuario

Creative

Creative CB2530 Manual de usuario

Renkforce

Renkforce RF FTVK-100 Manual de usuario

Philips

Philips SHQ3000 Manual de usuario

Sennheiser

Sennheiser 500371 Manual de usuario

Califone

Califone 2924AV Manual de usuario

Philips

Philips EARGEAR HE205 Series Manual de usuario

Technics

Technics EAH-AZ80 Manual de usuario