Beamz PROBEAM7R Manual de usuario

User Manual

PROBEAM7R

7R 230W Beam Moving Head

1.1 Unpacking

1.2 Safety Instructions

Carefully unpack the carton, check the contents to ensure that all parts are present,

and have been received in good condition. Contact your supplier immediately and

retain packing material for inspection if any part is missing or damaged.

1. INTRODUCTION

■1 x PROBEAM7R

■1 x Power Cord

■2 x Mounting Brackets

■1 x User Manual

▪The product is for indoor use only.

▪Always turn off, unplug power and allow fixture to cool before servicing.

▪Ensure that fixture is properly grounded.

▪Please keep this User Guide for future consultation.

▪Always make sure that you are connecting to the proper voltage and that the line

voltage you are connecting to is not higher than that stated on decal or rear panel of

the fixture.

▪Always disconnect from power before servicing or replacing fuse.

▪Make sure power cord is never crimped or damaged.

Warning!!! To reduce the risk of fire, electric shock, or injury to persons,

follow these important safety instructions:

The following items are included in the box:

Thank you for selecting this product. The Moving Beam 7R is a beam moving head

with OSRAM lamp. It produces stunning beam effects, ideal for stages, conernts, TV

studios, live shows, night clubs, etc. To optimize the performance of this product,

please read the user manual carefully before use.

Caution! The electric connection must be carried

out only by a qualified electrician.

Caution! Never look directly into the light source, as

sensitive persons may suffer an epileptic shock.

Caution! Never touch the device during operation!

The housing may heat up.

The Moving Head is fully operational in any mounting position, hanging upside-down,

side mounted, or set on a flat llevel surface, etc.

1.3 Technical Data

1.4 Product overview

2. SETUP

2.1 Mounting

▪Power supply: AC 100-240V 50-60Hz

▪Power consumption: 350W

▪Lamp: OSRAM 7R 230W lamp, 8,000K, 2,000 hrs

▪Beam angle: 0-4° adjustable

▪1 Colour wheel: 14 COLOURs + white

▪1 Gobo wheel: 17 fixed gobos + open

▪Colour rainbow + Gobo shaking

▪8-facet rotating prism

▪Motorized focus

▪Frost-filter

▪DMX-controlled or stand-alone with master/slave

▪2 DMX modes: 16ch (Simple)/20ch (Expand)

▪Pan : 540° (16 bit) Tilt: 270° (16 bit)

▪Automatic Pan/Tilt correction

▪Mechanical shutter and adjustable speed strobe effect

▪Touch LCD display with Joy Wheel

▪Dimension: 523×337×511mm

▪Weight: 19.5 kg

IMPORTANT!!! Safety cables must

always be used when unit is celling

or truss mounted. The safety cable

must be capable of holding 10

times the weight of the fixture. The

equipment must be installed by

professionals.

When installing the device, make sure there is no highly-inflammable

material (decoration articles, etc.) within a distance of min. 0.5 m.

DANGER OF FIRE!

DMX In/Out Power On/Off Power In/Out

Fuse

LCD Display Joy Wheel

The fixture is designed to work on AC 100-240V 50-60Hz. All units must be powered

directly from a switched circuit. This unit cannot be run on a rheostat or dimmer

circuit even if used solely for a 0% to 100% switching.

You can link the Moving Head 7R to a DMX controller using a 3- or 5-pin DMX cable.

2.3 AC Power

2.4 DMX Linking

WARNING!!! All fixtures must be connected to circuits with a

suitable Earth Ground.

Wire

Brown

Blue

Yellow/Green

Live

Neutral

International

Earth

The occupation of connection-wire is as follows:

DMX CONTROLLER

DMX OutDMX In

It is recommended to use a DMX terminator for installations where the DMX cable

has to run a long distance, or is in an electrically noisy environment. The DMX

terminator is simply an XLR plug with a 120 Ωresistor connected between pins 2 and

3,which is then plugged into the output XLR socket of the last fixture in the chain.

Please see illustrations below.

PIN 3

PIN 2

120Ω

3.1 Control panel

3.2 Menu Map

3. OPERATION INSTRUCTIONS

DmxSet

Dmx Set set DMX address001-512

Dmx Channle 16CH/20CH

Dmx Signal KEEP/CLEAR

RDM Function ON/OFF

Dmx Monitor to read DMX values

Setup

RunMode

Language English

ScreenRotation OFF/ON

Display OFF(off in 30s)/ON (always on)

Invert Pan ON/OFF

ON/OFF

Invert Tilt

Pan-Tilt swap OFF/ON

Pan-Tilt Encoder ON/OFF (setPan/Tillt correction)

Linear color

Load default to set factory defaults

DMX/AUTO/SOUNDAuto Mode

Manual Control Color,Shutter,Dimmer, Gobo,etc

Device Reset OK/Cancel

OK/Cancel

XY Reset

MT Reset

DMX Indicator Joy Wheel

DMX Channel modeDMX address

Error Indicator Press to enter/confirm

value,rotate to scroll through

menu list or change value.

System

Version Version number

Temp Msg Temperature information

Fan Msg Fan information

System Time Lamp/Fixture time

Sensor Monitor Pan/Tilt/Color/Gobo Hall

Lamp

Factory

System Error to show error info

Lamp ON/Off

Lamp On ON/OFF

Delay Time(Min) 00-19

ON/OFFLamp_Fan_Low

(password：

Up-Down-Up-Down）

Pan/Tilt/Color/Gobo motorMotor calibration

Range calibration Pan/Tilt/Focus/Dimmer Range

XY Sp calibration to set Pan/Tilt speed

Fan sp calibration to set fan speed

OK/CANCELLamp_hours_clear

3.2 DMX channels

PAN/TILT

MODE

SIMPLE

16CH

EXPAND

20CH

NAME DMX VALUECH

COLOUR

STROBE

select COLOURs, see details in COLOUR table

select strobe effects, see details in DIMMER & STROBE table

3 DIMMER select strobe effects, see details in DIMMER & STROBE table

4 GOBO select gobo, see details in GOBO table

5 PRISM select prism effect, see details in EFFECT table

6 PRISM ROTATION select prism rotation, see details in EFFECT table

7 NONE

8 FROST select frost effect, see details in EFFECT table

9 FOCUS focus adjustment from far to near

10 PAN Pan movement, see details in Pan/Tilt Table

11 PAN FINE

12 TILT Tilt movement, see details in Pan/Tilt Table

13 TILT FINE Fine control of Tilt, see details in Pan/Tilt Table

Fine control of Pan, see details in Pan/Tilt Table

14 P/T SPEED set Pan/Tilt movement speed, see details in Pan/Tilt Table

15 RESET reset the moving head, see details in Reset & Lamp Table

turn lamp on/off, see details in Reset & Lamp Table16 LAMP

17 GOBO SPEED set gobo wheel speed, see details in EXPAND CHANNEL Table

18 COLOUR SPEED set COLOUR wheel speed, see details in EXPAND CHANNEL Table

19 FOCUS SPEED set focus speed, see details in EXPAND CHANNEL Table

20 RUN MODE set running mode, see details in EXPAND CHANNEL Table

NAME FUNCTIONSCH

10 PAN

VALUE

0-255

0 - 540°

0 - 270°

11 PAN FINE

12 TILT

13 TILT FINE Fine control of Tilt movement

Fine control of Pan movement

14 P/T SPEED Pan/Tilt speed from fast to slow

DIMMER & STROBE

NAME FUNCTIONSCH VALUE

0-3

4-103

104-107

108-207

Strobe close

Strobe open

208-212 Strobe open

Strobe open

213-225 Random strobe, slow

226-238 Random strobe, medium

239-251 Random strobe, fast

252-255

strobe from slow to fast(mode 2)

strobe from slow to fast(mode 1)

2 STROBE

0-2553 DIMMER Dimmer 0 - 100%

The moving head can be operated in 2 DMX modes: SIMPLE (16ch) or EXPAND (20ch).

NAME FUNCTIONSCH VALUE

0-4

5-9

10-14

15-19

20-24

White

Colour 1

Colour 2

Colour 1 + Colour 2

White + Colour 1

25-29

30-34

35-39

40-44

Colour 3

Colour 4

Colour 3 + Colour 4

Colour 2 + Colour 3

45-49

50-54

55-59

60-64

Colour 5

Colour 6

Colour 5 + Colour 6

Colour 4 + Colour 5

65-69

70-74

75-79

80-84

Colour 7

Colour 8

Colour 7 + Colour 8

Colour 6+ Colour 7

85-89

90-94

95-99

100-104

Colour 9

Colour 10

110-114 Colour 11

Colour 9 + Colour 10

Colour 8 + Colour 9

115-119

120-124

125-129

130-134

Colour 12

Colour 13

Colour 12 + Colour 13

Colour 11 + Colour 12

105-109 Colour 10 + Colour 11

135-139

140-144

145-149

150-199

Colour 14

Clockwise colour scroll

Counter-clockwise colour scroll200-255

Colour 14 + White

Colour 13 + Colour 14

1 COLOUR

COLOURS 1

1 red

0 white

2 yellow

3 aquamarine blue

Green-yellow

green

light blue6

purple7

light yellow8

pink9

blue10

pale brown

light white

brown11

14 lavander

NAME FUNCTIONSCH VALUE

0-4

5-9

10-14

15-19

20-24

Open

Gobo 2

Gobo 4

Gobo 3

Gobo 1

25-29

30-34

35-39

40-44

Gobo 6

Gobo 8

Gobo 7

Gobo 5

45-49

50-54

55-59

60-64

Gobo 10

Gobo 12

Gobo 11

Gobo 9

65-69

70-74

75-79

80-84

Gobo 14

Gobo 16

Gobo 15

Gobo 13

85-89

90-129

130-134

135-169

Clockwise gobo scroll from fast to slow

Counter-clockwise gobo scroll from slow to fast

Stop

Gobo 17

170-174 Gobo 1 shaking from slow to fast

175-179 Gobo 2 shaking from slow to fast

180-184 Gobo 3 shaking from slow to fast

185-189 Gobo 4 shaking from slow to fast

190-194 Gobo 5 shaking from slow to fast

195-199 Gobo 6 shaking from slow to fast

200-204 Gobo 7 shaking from slow to fast

205-209 Gobo 8 shaking from slow to fast

210-214 Gobo 9 shaking from slow to fast

215-219 Gobo 10 shaking from slow to fast

4 GOBO

GOBOS

4. General Maintenance

a. Unscrew the fuse holder and remove the damaged fuse.

b. Replace with the same type fuse (F7A/250V) and screw fuse holder back in its place.

4.1 Fuse Replacement

EFFECT

NAME FUNCTIONSCH

5 PRISM

8 FROST

6PRISM

ROTATION

VALUE

0-127

128-255

0-127

128-191 Counter-clockwise rotation from fast to slow

Clockwise rotation from slow to fast192-255

No function

0-255 Frost 0 - 100%

9 FOCUS 0-255 Focus from far to near

Angle 0 - 400°

8-facet prism

RESET & LAMP

NAME FUNCTIONSCH

15 RESET

16 LAMP

VALUE

0-127

128-200

201-255

0 - 9

Turn lamp on （over 3 seconds）

10-100

No function

101-255 Turn lamp off （over 3 seconds）

Reset （over 3 seconds）

EXPAND CHANNELS

NAME FUNCTIONSCH

17 GOBO SPEED

VALUE

0-255

0 - 049

Pan Auto050-099

Gobo wheel speed from fast to slow

18 COLOR SPEED 0-255 Colour wheel speed from fast to slow

20 RUN MODE

FOCUS SPEED 0-255 Focus speed from fast to slow

DMX mode

100-149 Tilt Auto

150-199 Auto mode

200-255 Sound mode

4 GOBO

220-224 Gobo 11 shaking from slow to fast

225-229 Gobo 12 shaking from slow to fast

230-234 Gobo 13 shaking from slow to fast

235-239 Gobo 14 shaking from slow to fast

240-244 Gobo 15 shaking from slow to fast

245-249 Gobo 16 shaking from slow to fast

250-255 Gobo 17 shaking from slow to fast

Tabla de contenidos

Otros manuales de Equipo de iluminación de Beamz

Beamz

Beamz LS3DRGB Laser RGB 3D Manual de usuario

Beamz

Beamz MultiRadiant 6x3W RGBAW LED 48 Beams Manual de usuario

Beamz

Beamz BPP200 Manual de usuario

Beamz

Beamz BUVW Series Manual de usuario

Beamz

Beamz PS12W Manual de usuario

Beamz

Beamz LED ACIS II 8 WAY 10W RGBW DMX Manual de usuario

Beamz

Beamz 152.909 Manual de usuario

Beamz

Beamz LED PAR 4X 8W Quad Linkable Instrucciones de montaje

Beamz

Beamz BWA63 ALUPAR Manual de usuario

Beamz

Beamz LED PARBAR 4Way Kit 7x 10Watt Quad LED DMX Manual de usuario

Beamz

Beamz Multi Acis III LED Manual de usuario

Beamz

Beamz Panther 40 Led Spot Manual de usuario

Beamz

Beamz BT310 Manual de usuario

Beamz

Beamz LCB155 Manual de usuario

Beamz

Beamz MHL 108 WASH 150.509 Manual de usuario

Beamz

Beamz MadMax 5x10W COB LED Matrix Manual de usuario

Beamz

Beamz BWA412 Manual de usuario

Beamz

Beamz UplIght Par Manual de usuario

Beamz

Beamz BT410 Manual de usuario

Beamz

Beamz S1500 DMX Manual de usuario

Beamz

Beamz BAC306 Manual de usuario

Beamz

Beamz BMS50 Manual de usuario

Beamz

Beamz BSS50 Manual de usuario

Beamz

Beamz 150.493 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario