Beamever SUNO FLEX WHT Manual de usuario

The ambient temperature between -35°C~55°C to ensure the best working

performance of SUNO FLEX WHT.

Must ensure the person who must be

qualified, full-of experienced in electrical

and construction. And must meet

relative regulation and standards to

install luminaire.

Before installing this product, please visit

the product page at www.beamever.com

for the latest installation instructions.

Please do the regularly check for

ensuring maintain the protection

requirement, e.g.,either connection is still

steady & safe.

SUNO FLEX WHT

Installation Instructions

Verify the electrical plan and all necessary surge protection requirements

Installation Options

1.Please use power supply with constant

voltage DC24V to feed luminaires. Max Running

Length is 12M at one point power feed and

make sure no less than 21.5V to supply it.

Besides, if exceed 12M, please split into

multiple circuit branch.

2.The total power of each circuit branch cannot

be more than 80% of the total power of the

power supply.

3.Ensure that main power supply is off before

installing or wiring a luminaire.

5.Luminaires working environment should be

ventilated and clear, can not be covered with

items, please do regular cleaning to avoid dust

accumulation, also important do the regular

inspection of each connector is abnormal, each

sealing interface whether still meet protection

requirements, whether the join wire still

working and so on.

4.Please ensure the male and female

connectors connected correctly and no short

circuit before power on.

Stainless Wire Installation

(If you chooses stainless-wire installation, we will have

assembled the luminaires with stainless wires before

shipment.)

Aluminum Profile Installation

(Aluminum profile includes the cover and mounting

base )

Step 1: To put the luminaires to the pre-arranged

installation position.

Step 2: To fix the two ends of the stainless wire.

Step 3: Ensure they are steadying and connect safety

with each other between lights and stainless wire.

Step 1: Apply screws for steadying aluminum

mounting base in required-position.

Step 2: Place the luminaires into aluminum mounting

base.

Step 3: Clip cover into the mounting base.

Do not twist or loop cable

Do not over stretch cable

Use caution when installing luminaire nodes

Additional Notice

In the replacement and maintenance of products, make sure to cut off all the power before

start maintenance, in order to prevent electric shock or short circuit. After troubleshooting,

it is necessary to correctly install the various components to ensure that the electrical and

structural requirements meet the original requirements and then connect power.

Please note, specifications are subject to change without notice. and all information contained within

this instruction manual is provided in good faith. No representation or warranty as to the accuracy or

completeness of the information included herein is given and any liability for any action in reliance thereon is

disclaimed.

It is very important to ensure

the safety and integrity of the

accessories. Do not twist or loop

with the cable easily. Because it is

very dangerous, which can cause

accessories damage and potential

personal safety.

Cables are important for a durable

and safe lighting project. So please

don't play around or over-stretch

them. This might cause any damage

to the cable, and affect the lighting

effect.

Stainless Mounting Clip Installation

(Aluminum profile includes the cover and mounting

base )

Step 1: Place luminaires and clips in required-position.

Step 2: Apply screws for steadying them.

Step 3: Ensure all clips, lights, and screws are stable.

Otros manuales de Equipo de iluminación de Beamever

Beamever

Beamever LINIO NEON EOS TV PIXEL RGB Manual de usuario

Beamever

Beamever LINIO NEON 0408 SV Hoja de datos

Beamever

Beamever LINIO NEON 1212 TV TW Manual de usuario

Beamever

Beamever LINIO NEON 1220 SV BLACK Manual de usuario

Beamever

Beamever LINIO NEON 1220 SV RGB Manual de usuario

Beamever

Beamever LINIO NEON 1615 TV PIXEL RGBW Manual de usuario

Beamever

Beamever HELA FLEX WHT Manual de usuario

Beamever

Beamever LINIO NEON 1615 TV Manual de usuario

Beamever

Beamever VALEA GRAZE WHT Manual de usuario

Beamever

Beamever LINIO NEON 1220 SV PIXEL RGBW Manual de usuario

Beamever

Beamever LINIO NEON 1615 TV HE Manual de usuario

Beamever

Beamever LINIO NEON 1212 TV RGB Manual de usuario

Beamever

Beamever LINIO NEON 1615 TV RGB Manual de usuario

Beamever

Beamever LINIO NEON 1220 SV TW Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario