4
PRODUCT SPECIFICATIONS
The pressure washer being used MUST be compatible with the below specifications to
ensure proper operation.
• 3/8" Quick Connect hose coupler
• 4,000 Maximum PSI / 5,000 PSI for 85.403.008 Model
• 1,500 Minimum PSI
• 5.0 Maximum GPM
• 3.0 Minimum GPM
• Up to 200°F/82°C water temperature
• (Changing nozzles will alter the min and maxes, see NOZZLE CHART)
SAFETY
• ALWAYS review and know all the warnings and safety alerts for the pressure washer
that you are using that can be found in the pressure washer manual.
• ALWAYS be aware of where the Whirl-A-Way is being used or pointed. High-pressure
spray can cause injury or damage.
• If this type of injury occurs, DO NOT TREAT AS A SIMPLE CUT. SEEK
EMERGENCY MEDICAL ATTENTION IMMEDIATELY. If you are using
cleaning detergents, be prepared to tell the physician exactly what kind.
• Spray guns can have signicant kickback. ALWAYS brace yourself and have rm
footing when operating.
• NEVER attempt to repair high-pressure components if damaged. Always replace parts.
• ALWAYS use on at surfaces.
• WARNING: Hitting any raised obstacle with the surface cleaner can cause damage.
If performance changes, or if it begins to vibrate aer impact, immediately turn o the
pressure washer. Inspect for damages and make repairs.
• ALWAYS ensure all component connections and ttings are securely fastened. High-
pressure water can turn loose ttings or spray nozzles into projectiles causing injury or
damage.
• CAUTION: If stones or debris collect in the whirl-a-way they can be cleared by tilting
it in safe direction to ush away the debris.
• ONLY use cold water pressure washers. Hot water pressure washers will cause failures
and will void warranty.
• ALWAYS be aware of surfaces that will become wet and may become slippery.
• ALWAYS wear appropriate personal safety equipment. Eye protection is especially
important.
• NEVER use without wearing foot protection.
• ALWAYS have a secure grip of the gun and stable footing.
• NEVER modify the Whirl-A-Way in any manner.
• NEVER reach under the Whirl-A-Way while it is operating.
• ALWAYS test in a safe location when rst using.
PRODUCT SPECIFICATIONS AND SAFETY
