For first pairing procedure, it takes 30~60 secs until all devices
show LED green flash. The last device will be in searching mode(LED
purple) for one minute, while all devices become LED green slow
flash, all pairing procedure is completed.
After pairing with smart phone, open “Bb MOTO”app
and press and hold UP & DOWN button (3sec.) until LED
red,blue and green flashes, you can start to update the
firmware.
INTERCALL + MUSIC
RECORD INTERCALL CONVERSATION
DURING VIDEO RECORDING
Make the phone call by smart phone.
Press MAIN button once to accept the incoming call.
Press MAIN button to end the phone call, intercall will come
back automatically.
Press DOWN button for 2sec. to let phone call Join/Leave group
talk.
Press DOWN button once to cut off intercall and continue the
phone call.
Press MAIN button twice quickly to decline the incoming call.
Press DOWN button to cut off intercall and will accept phone
call automatically.
Press MAIN button twice quickly to redial the phone call.
SMART LINK (Up to 6 devices)
ONLINE INTERCALL
INTERCALL + PHONE CALL
WHILE INTERCALLING + MAKE PHONE CALL
WHILE INTERCALLING + INCOMING CALL
WHILE PHONE CALLING (INTERCALL HOLD)
While listening music, press DOWN button once to Link/
Cut off the intercall.
While intercalling, press MAIN button once to add music,
press MAIN button once again to pause music.
While listening music, press DOWN once to Link/Cut off
the intercall.
Press and hold all devices’ MAIN and DOWN button (3sec.)
until LED blue flashes.
Step 1. Turn ON all devices
Press and hold all devices DOWN button (3sec.) until LED
yellow flashes.
Press either one of device’s DOWN button once, the device’s
LED yellow will become purple quick flash.
When LED purple quick flash becomes green slow flash.
It means pairing succeed.
The second device will search other devices and get paired
automatically, this process will go on automatically until all
devices get paired.
Step 2. Set up pairing
After pairing with smart phone, turn on “Bb TALK”app
and start to talk.
While online intercalling, press UP button once to leave
or get into the chat room.
After pairing with smart phone, open “Bb CAM”app,
then the app can record audio during video recording.
“BbCAM” app supports almost every BLUETOOTH Mics.
REC
UPDATE BY APP
You can easily change the setting by “Bb MOTO”app .
!NOTICE :
!NOTICE :
Once devices have done initial pairing, they will memorize pairing.
For next use, after turning on all devices, only ONE user needs to press
DOWN button, other devices will be paired automatically.
If auto relink search over than one minute, please get closer between
two devices and press DOWN button once to relink again.
When manually press the DOWN button to disconnect the intercall, must
press DOWN button once to relink the intercall.
!NOTICE :
For Android system, make sure to go to music page first.
For iOS system, it will go to default app MUSIC automatically.
When the intercall disconnect due to weak signal, it will search signal
and relink automatically within one minute. (LED is purple qick flash
while searching. When devices are connected, LED will become slow
green flash.)
Connected Search
automatically
When manually press the DOWN button to disconnect the intercall, must
press DOWN button once again manually to relink again after one minute.
Even some of the devices leave the intercall area, other devices are still
connected.
It is better to regroup(relink) if the members are not the exact members
as last time.
Private call
2sec.
Share the phone call
End Back to intercall
A B
AB
Incoming call Intercalling
AB
A B
C
(A2DP)
(HSP)
Intercall with phone pairing Intercall without phone pairing
Group talk area’s diameter
will between 200~600meter
Group talk area’s diameter
will over 1000meter
While intercalling, press MAIN button once to add music, press
MAIN once again to pause music.
200~600m 1200m
