Baxter ML-132577 Manual de usuario

Baxter Mfg, a Division of ITW FEG, LLC • 19220 State Route 162 East • Orting, WA 98360-9236

Phone: (360) 893-5554 • Fax: (360) 893-1337

www.baxtermfg.com

Model Number: ___________

Serial Number: ___________

Date of Installation: ___________

Operator

Manual

FORM 36764 Rev. C (February 2022)

OV520 ROTATING RACK OVEN WITH

SMART TOUCHTM CONTROL

ML-132577 OV520G1

ML-132576 OV520G2

– 2 –

IMPORTANT FOR YOUR SAFETY

POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT

THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBTAINED FROM THE

LOCAL GAS SUPPLIER.

IMPORTANT

IN THE EVENT A GAS ODOR IS DETECTED, SHUT DOWN UNITS

AT MAIN SHUTOFF VALVE AND CONTACT THE LOCAL GAS

COMPANY OR GAS SUPPLIER FOR SERVICE.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE

VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER

APPLIANCE.

IMPROPER INSTALLATION, ADJUSTMENT,

ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE

PROPERTY DAMAGE, INJURY OR DEATH. READ THE

INSTALLATION, OPERATING AND MAINTENANCE

INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR

SERVICING THIS EQUIPMENT.

IN THE EVENT OF A POWER FAILURE, DO NOT ATTEMPT TO

OPERATE THIS DEVICE.

KEEP AREA AROUND OVEN CLEAR OF COMBUSTIBLES. DO

NOT OBSTRUCT COMBUSTION AND VENTILATION OPENINGS

ON THE OVEN.

DO NOT SPRAYAEROSOLS IN THE VICINITY OF THISAPPLIANCE

WHILE IT IS IN OPERATION.

– 3 –

TABLE OF CONTENTS

GENERAL................................................................................................................................................ 5

INSTALLATION....................................................................................................................................... 5

Warranty ............................................................................................................................................. 5

OPERATION ........................................................................................................................................... 5

Basic Operation ............................................................................................................................... 5

Rack Loading................................................................................................................................... 6

Rack Unloading ............................................................................................................................... 6

Operating Modes ................................................................................................................................ 7

Auto Mode...................................................................................................................................... 7

Manual Mode ................................................................................................................................. 7

Smart™ Touch Toolbox ................................................................................................................. 7

Display Screen Buttons ...................................................................................................................... 8

Auto Mode Buttons......................................................................................................................... 8

Manual Mode Buttons .................................................................................................................... 9

Classic Manual Mode Display and Buttons.................................................................................. 10

Toolbox Buttons.............................................................................................................................11

Miscellaneous Screens .................................................................................................................11

Using Auto Mode .............................................................................................................................. 12

Creating a Recipe ........................................................................................................................ 12

Using a Recipe............................................................................................................................. 17

Viewing a Recipe in Progress ...................................................................................................... 17

Manual Mode.................................................................................................................................... 18

Using Manual Mode ..................................................................................................................... 18

Using Classic Manual Mode......................................................................................................... 20

Using Smart Touch Toolbox Mode .................................................................................................... 20

User Manual Screen .................................................................................................................... 20

Data Exchange Screen ................................................................................................................ 21

Client Parameters Screen ............................................................................................................ 21

Parameters Table ......................................................................................................................... 22

Auto O󰀨 ........................................................................................................................................ 23

Shutdown.......................................................................................................................................... 24

Restarting Oven................................................................................................................................ 24

TROUBLESHOOTING ......................................................................................................................... 25

Burners Will Not Light on Gas Oven................................................................................................. 25

Other Troubleshooting Topics........................................................................................................... 25

Error Screen Information .................................................................................................................. 25

CLEANING ............................................................................................................................................ 27

– 4 –

MAINTENANCE.................................................................................................................................... 28

General ............................................................................................................................................ 28

As Needed ................................................................................................................................... 28

Daily ............................................................................................................................................. 28

Weekly ........................................................................................................................................ 28

Monthly......................................................................................................................................... 28

Bi-Monthly .................................................................................................................................... 28

Annually ....................................................................................................................................... 28

Preventive Maintenance ................................................................................................................... 28

Service And Parts Information .......................................................................................................... 28

OWNER PREVENTIVE MAINTENANCE PROCEDURE .................................................................. 29

Introduction....................................................................................................................................... 29

Tools Used for Inspection Procedure ........................................................................................... 29

Preventive Maintenance Procedure ................................................................................................. 29

Inspect Oven Lamps .................................................................................................................... 29

Clean and Vacuum Components and Control/Burner Compartment Area (Gas Only) ................ 30

Rack Lift and Rotation Assemblies............................................................................................... 30

Inspect Door Components ........................................................................................................... 31

Inspect Air Louvers....................................................................................................................... 33

Inspect Cavity Vent ...................................................................................................................... 33

Visually Inspect Electrical Connections........................................................................................ 33

Verify Ignition Module Safety Lockout Functions (Gas Only) ....................................................... 34

Verify Operation of Steam ............................................................................................................ 35

– 5 –

OPERATION AND CARE OF

MODEL OV520 RACK OVEN

RETAIN THIS MANUAL FOR FUTURE REFERENCE

GENERAL

The Baxter OV520 Rack Oven accommodates a roll-in rack. It is equipped with the Smart Touch™ control

for baking, roasting, and/or steaming applications. A mechanism in the oven ceiling picks up and rotates

the rack during the baking/cooking cycle.

• Model OV520G1 is rated at 180,000 Btu/hr, natural or propane gas.

• Model OV520G2 is rated at 275,000 Btu/hr, natural or propane gas.

All instructions herein related to shutdown and restart procedures, cleaning, maintenance and any other

service work are prepared to be used by trained personnel and should not be used by anyone who is not

properly qualied.

INSTALLATION

See separate OV520G Installation Manual.

WARRANTY

To activate warranty, the Baxter OV520-series Rack Oven must have a startup performed by an authorized

Baxter servicer.

Failure to follow use, care, cleaning, and/or maintenance instructions in this Operator Manual may void

any product warranty provided by Baxter.

OPERATION

BASIC OPERATION

For best results, the oven must be preheated to bake temperature before baking begins.

1. The door must be closed for oven to heat. The rack carrier will lift and rotate only during timed bake.

NOTE: The rack carrier will be in the unload position from the last bake. If the rack carrier was moved

out of the home position, the rack carrier will lift and turn to the unload position when the door is opened.

2. Press the POWER button below the user display screen to turn the oven on.

– 6 –

3. The oven will preheat to the default preheat temperature. See Client Parameters for information

about setting the default preheat temperature. See Auto Mode or Manual Mode for instructions on

how to adjust the temperature.

4. For optimum steaming capability, allow 30 minutes after the oven has reached the set temperature

for the steam system to charge.

5. The oven is now ready for baking operations.

The oven and its parts are hot. To prevent burns, use hot pads or protective mitts

when loading or unloading the oven.

Hot air and steam are released from the oven interior when the loading door is

opened. To avoid burns, open the door slowly and keep clear of the opening.

6. To adjust bake settings, see the Auto Mode or Manual Mode sections.

7. After the oven is preheated and the product is ready to bake, slowly open the door and load the rack

onto the oven carrier.

8. Close the door and touch the Start button. The rack will lift and rotate.

9. The oven will beep after the set time ends. Touch Stop or open the door to silence the beeper.

10. Open door. Allow the rack carrier to stop and lower. The rack can now be removed.

RACK LOADING

1. Type B and C rack carriers are equipped with stops on both ends. For B lifts, ensure stop ap is in

the up position to load the rack on the rack carrier. For C lifts, push rack stop to the left after rack is

loaded. Note: C carriers for single rack ovens only have one stop. Push rack in until rack hits rear

stop.

2. Roll the rack into the oven so the end brackets channel onto the rack carrier. When using racks

equipped with pan stops, load racks so stops will prevent movement of trays toward user when racks

are unloaded. Position pans so they do not extend beyond the rack. If the pans extend beyond the

rack, it may cause the rack to get jammed when rotating.

3. Close the loading door. The rack carrier will lift and rotate only during timed bake.

The oven and its parts are hot. To prevent burns, use hot pads or protective mitts

when loading or unloading the oven.

Hot air and steam are released from the oven interior when the loading door is

opened. To avoid burns, open the door slowly and keep clear of the opening.

RACK UNLOADING

1. Touch Stop and/or open the loading door to silence the beeper.

2. Wait for the rack carrier to stop and lower.

3. For B lifts, push the rack stop down to unload the rack from the rack carrier. For C lifts, push rack

stop to the right to open.

4. Roll the rack from the rack carrier.

5. Close the loading door.

– 7 –

OPERATING MODES

The user display screen will default to the mode selected in the Client Parameters. Touch the mode at the

top of the screen to change the mode.

Auto Mode

Touch AUTO at the top of the

screen to access Smart Touch

Auto Mode operation (Fig. 1).

Recipes can have 1–6 steps.

Manual Mode

Touch MANUALat thetop ofthe

screen to access Smart Touch

Manual Mode operation (Fig.

2). Manual Mode operation can

be used for single-step recipes.

Smart™ Touch Toolbox

To access the Smart Touch

Toolbox, touch Toolbox (Fig. 3).

This mode accesses the User

Manual, Data Exchange, and

Client Parameters.

NOTE: The Smart Touch

control can also be adjusted

to operate in Classic Manual

Mode (Fig. 4). This mode

emulates the traditional Baxter

keypad control.

Fig. 1 Fig. 2

Fig. 3 Fig. 4

– 8 –

DISPLAY SCREEN BUTTONS

The Auto and Manual modes are adjusted by touching the various buttons on the display. Review the

charts below for information about each button.

Auto Mode Buttons

BUTTON NAME ACTION

Baxter Recipes Shows preset Baxter recipes. These can be copied to My Recipes

and then modied.

My Recipes Location of customer recipes. Recipes can be copied, created,

modied, or deleted here.

Recipe Selector

Shows list of all recipes as images.

Touch up/down arrow to scroll pages.

Select recipe by touching desired recipe image.

Copy Touch to copy a recipe.

New Touch to create a new recipe.

Modify Touch to modify a recipe.

Delete Touch to delete an existing recipe from My Recipes.

Summary Touch to enable preheating when a recipe is selected and review all

steps and bake/cook parameters of a recipe.

List Display Touch to view all recipes in a list view alphabetically. Toggles to

Photo Display when touched.

Photo Display Touch to view all recipes in as images. Toggles to List Display when

touched.

Cooldown

Touch to access keypad for temperature adjustments and to start a

cooldown process.

NOTE: Start button at the bottom of the display will turn blue and

scroll COOLING during a cooldown cycle. Cooldown temperature

must be set to a minimum of 25°F below oven temperature.

Start

Touch Start to initiate a bake/cook cycle and all parameters. Oven

status will display.

Green Start button means oven is preheated.

Yellow Start button means oven is preheating.

– 9 –

BUTTON NAME ACTION

Stop Touch Stop to end a bake/cook cycle in process.

End

Touch end to nish a bake/cook cycle.

NOTE: After bake/cook time ends, touch time display to add time

using the keypad.

Manual Mode Buttons

BUTTON NAME ACTION

Temperature

Setting Display

Shows set and current temperature. Touch the window to access the

keypad for temperature adjustment. Temperature can be adjusted at

any time.

Timer Setting

Display

Shows set and remaining time. Touch the window to access keypad

for timer adjustment.

NOTE: After bake/cook time ends, touch time display to add time

using the keypad.

Fan Delay Shows the Fan Delay Time for the current step in a recipe. Touch

the button to access keypad to change fan delay time.

Vent (Open) Allows the cavity vent to be opened or closed during a recipe or

step. When the button is touched, the icon toggles indicating the

opened or closed setting. This feature can be programmed into a

step or manually adjusted by touching the button while a recipe is

running.

Vent (Closed)

Steam Burst Touch to access keypad and set steam time.

Steam Pulse

Touch and hold the Steam button for 3 seconds to access pulse

steam mode. Touch again to access keypad and set steam time and

interval.

Cooldown

Touch to access keypad for temperature adjustments and to start a

cooldown process.

NOTE: Start button at the bottom of the display will turn blue and

scroll COOLING during a cooldown cycle. Cooldown temperature

must be set to a minimum of 25°F below oven temperature.

Add/Subtract

Time

Touch + / - to change time during a bake/cook cycle. Time is added

to the last step.

NOTE: After bake/cook time ends, touch time display to add time

using the keypad.

Save Touch to save current one-step recipe in My Recipes.

– 10 –

BUTTON NAME ACTION

Start

Touch Start to initiate a bake/cook cycle and all parameters. Oven

status will display.

Green Start button means oven is preheated.

Yellow Start button means oven is preheating.

Stop Touch Stop to end a bake/cook cycle in process.

End

Touch End to nish a bake/cook cycle.

NOTE: After bake/cook time ends, touch time display to add time

using the keypad.

Classic Manual Mode Display and Buttons

DISPLAY/BUTTON NAME ACTION

Temperature Display

Shows set temperature. Use arrows to adjust

temperature. Temperature can be adjusted at any time.

Touch window to display current temperature.

Timer Display

Shows set and remaining time. Use arrows to adjust time.

Touch window to display set time during a bake/cook

cycle.

Steam Display Shows set steam time. Use arrows to set steam time.

Fan Delay Display Shows fan delay time. Use arrows to set fan delay time.

Arrows Use arrows next to each display to adjust settings.

Cooldown

Adjust temperature to desired lower temperature using

temperature down arrow and touch Cooldown button.

Touch the Stop button to end a cooldown process.

NOTE: Cooldown temperature must be set to a minimum

of 25°F below oven temperature.

Vent (Open/Closed) Touch button to open or close the vent.

Start

Touch Start to initiate a bake/cook cycle and all functions.

Green Start button means oven is preheated.

Yellow Start button means oven is preheating.

Stop Touch Stop to end a current bake/cook cycle.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Horno de baxter

baxter

baxter OV500 Series Manual de usuario

baxter

baxter OV310 Series Manual de usuario

baxter

baxter OV500 Series Manual de usuario

baxter

baxter OV310E Manual de usuario

baxter

baxter OV210 Series Manual de usuario

baxter

baxter OV520G1 Manual de usuario

baxter

baxter OV450N Manual de usuario

Manuales populares de Horno de otras marcas

Bosch

Bosch HVA531NS0 Manual de usuario

Electrolux

Electrolux EOF6P46X Manual de usuario

NEFF

NEFF B44S32 5GB Series Manual de usuario

Combi

Combi BLODGETT BC142GDS Manual de usuario

AEG

AEG COMPETENCE 311704300 Manual de usuario

Falcon

Falcon DOMINATOR PLUS G3106 Series Guía del usuario

Rational

Rational SCC WE 61G Manual de usuario

Smeg

Smeg DOSPA38X Manual de instalación y operación

Electrolux

Electrolux air-o-convect 20 GN 2/1 Manual de usuario

Miele

Miele HR 1954-2 Manual de usuario

KHIND

KHIND OT50 Manual de usuario

Henny Penny

Henny Penny Smoker Box Manual de usuario

Lang

Lang ECOD-AP Manual de usuario

AEG

AEG BEK455310M Manual de usuario

Frigidaire

Frigidaire FNGE90JGR Manual de usuario

Hotpoint

Hotpoint FE9 S831 JSH IX Manual de usuario

GE Advantium SCB2000 Manual de usuario

AEG

AEG DE401301DM Manual de usuario

baxter ML-132577 Manual de usuario

Manuales populares de Horno de otras marcas