4
Installation
Console:
The console is designed to sit on the counter top. There is one console per lane with the speaker
facing backward.
The power comes from a UL Listed transformer supplied with the kit. Plug the round end of the
transformer provided into the round jack on the board inside the console. Plug the transformer into a
120vac outlet.
Customer End:
Make the customer audio component connections. Connections are Molex. Each component has a
different connector. Board is labeled accordingly, see page 5.
External Audio Components:
We supply many different types of external audio components. These must be selected to suit the
needs of the applications. The rugged, weatherized components that we supply are designed
specifically for outdoor audio communication. Off the shelf Hi-Fidelity components are not
weatherproof, nor were they designed for the rigors of the drive-thru environment, hence, they do
not last long when used.
We have found that for proper sound quality, toreduce squealing and have sufficient gain levels, the
speakers must have backboxes. Wesupply backboxes on the speakers in all of the audio systems we
manufacture. In addition, we offer backboxes for use in retrofit applications that may benefit from
them.
For a complete customer audio panel for use with the Transaction Drawer™, order P/N 24031991.
This is an engineered solution which includes matching black powder coated trim, mounting plates,
speaker with acoustical backbox, call button with 10' leads, and isolation mounted microphone.
Units with handset:
For private conversations, we offer a handset/hands free version of the 1 on 1 system, which
switches the mic and speaker from the console to the handset allowing both the convenience of
hands free operation and privacy for delicate conversations.
