4
It is imperative to every person who is involved with the installation,
start-up, operation and maintenance to have read and understood
the complete Operating Instruction.
It is the responsibility of the customer to ensure that only
authorized persons may be allowed to use the surge voltage
generator.
Only authorized personnel! The user
- is qualified and properly instructed and has
the necessary experience.
- knows the relevant standards, accident
prevention rules and operating conditions.
- is able to carry out the necessary operations
and is aware of the possible dangers involved.
- must immediately inform his superior about
any conditions of the unit that could affect safety.
The surge voltage generator is used for cable fault location at layed
power cables!
Any other or additional use is deemed to be in contravention of the
intended use. The manufacturer shall not be liable for damage
resulting from any such use. In such a case the risk shall be borne
solely by the user.
The local safety and accident prevention rules are always
applicable to the operation of the surge voltage generator unit.
Especially the surge voltage generators may not be used in
potentially explosive atmosphere or at test objects which are in
service.
Danger! High-voltage
When using surge mode:
Cordon off surge voltage generator at a distance of 1.5 m
Persons must stand only outside the barrier
Warranty
At the customer’s written request we undertake to repair or replace at
our discretion and as quickly as possible all parts that become faulty as
the demonstrable result of poor material, faulty design or defective
workmanship. We shall bear the costs of any faulty parts requiring
replacement, but not the costs of transport to us and back to the
customer, nor the costs of packing and insurance! The
12 month warranty time starts from delivery. We shall not be liable for
any damage resulting from normal wear and tear, improper handling,
non-observance of Operating Instructions and safety regulations. We
shall also refuse to accept any liability if the customer carries out
repairs or changes to the unit themselves or has others carry them out!
The warranty does not cover damage in transit, batteries, fuses and
any readjustments in accordance with the Operating Instructions!
We draw attention in addition to the ‘General Sales and Business
Conditions’ of:
BAUR Prüf- und Messtechnik Gmbh Raiffeisenstrasse 8,
A-6832-Sulz / Austria
