Baumalight DXH Manual de usuario

DXH Drop Saw

OPERATOR’S MANUAL

Issue Date: March 2020

TABLE OF CONTENTS

1 INTRODUCTION �� 1

1�1 Overview�� 1

1�2 Intended Use And Foreseeable Misuse�� 1

2 SAFETY�� 2

2�1 Safety Alert Symbol And Safety Words�� 2

2�2 Operational Hazards�� 2

Prepare For Emergencies �� 3

Replace Safety Signs �� 3

Do Not Allow Riders �� 4

Lower Operating Speed �� 4

Avoid Rollover �� 4

Avoid Powerlines & Underground Utilities �� 4

Detach Drop Saw Safely�� 5

Hazards From Modifying Equipment �� 5

2�3 Maintenance Hazards�� 7

3 SAFETY DECALS �� 8

4 OPERATION �� 10

4�1 Preparation For Use �� 10

4�2 Pre-Operation Check List ��11

4�3 Machine Components �� 12

4�4 Attach Drop Saw �� 12

4�5 Initial Startup�� 13

4�6 Detach Drop Saw �� 13

4�7 Transporting�� 14

4�8 Carbide Teeth Break-In�� 14

4�9 First Time User Tips �� 15

4�10 Field Operation �� 15

5 SERVICE AND MAINTENANCE�� 17

5�1 Maintenance�� 17

5�2 Inspections�� 18

5�3 Rotate Cutting Teeth�� 18

5�4 Replace Cutting Teeth�� 19

5�5 Motor Shaft Seal �� 19

6 TROUBLESHOOTING �� 20

7 STORAGE�� 20

7�1 Storing Drop Saw �� 20

7�2 Remove Drop Saw From Storage�� 20

8 WARRANTY�� 21

1 INTRODUCTION

Congratulations on your choice of a Baumalight

Drop Saw to complement your pruning, trimming

and clearing operation. This equipment has been

designed and manufactured to meet the needs

of a discriminating buyer for efcient clearing of

brush, shrubs and trees.

The blade is hydraulic powered by the hydraulic

system on your excavator.

Replaceable bearings are provided at major pivot

points for extended service life.

Safe, efcient and trouble free operation of your

Drop Saw requires that you and anyone else

who will be operating or maintaining the Drop

Saw, read and understand the Safety, Operation,

Maintenance and Troubleshooting information

contained within the Operator’s Manual.

This manual covers the Baumalight DXH Drop

Saw. Use the Table of Contents as a guide to

locate required information.

Keep this manual handy for frequent reference

and to pass on to new operators or owners. Call

your Baumalight dealer, distributor or the factory

if you need assistance, information or additional

copies of the manuals.

When this machine is worn out and no longer in

use, it should be returned to the retailer or other

party for recycling.

OPERATOR ORIENTATION - The directions left,

right, front and rear, as mentioned throughout this

manual, are as seen from the operator’s seat and

facing in the direction of travel.

1.1 Overview

The Drop Saw is designed to be used by

experienced operators, trained in the safe operation

of an excavator and trained in the hazards related

to using the drop saw and the safe use of the

drop saw for the intended purpose. Operators

will require personal protective equipment to

reduce the risk from some hazards that cannot be

completely eliminated or controlled by the design

of the tool.

Care is required to ensure that the drop saw will

not come across metallic objects, stones or other

materials.

Drop saw is not designed for use in hazardous

atmospheres where there is a risk of re or

explosion due to ammable gases or vapors. Use

in hazardous, explosive atmospheres is prohibited.

Serious injury or death of the operator or bystanders

may be caused if the drop saw is misused. Misuse

may also cause damage to the machine carrying

the implement.

1.2 Intended Use And

Foreseeable Misuse

2 SAFETY

You must read, understand and follow the

instructions given by the operating unit

manufacturers, as well as the instructions in this

manual.

The safety information in this manual is denoted

by the safety alert symbol:

This symbol means ATTENTION! BECOME

ALERT! YOUR SAFETY IS INVOLVED!

The level of risk is indicated by the following signal

words:

^ DANGER

DANGER - Indicates a hazardous

situation, which, if not avoided, WILL

result in death or serious injury�

^ WARNING

WARNING - Indicates a hazardous

situation, which, if not avoided, could

result in death or serious injury�

^ CAUTION

CAUTION - Indicates a hazardous

situation, which, if not avoided, could

result in minor or moderate injury�

NOTICE

NOTICE - Indicates a situation that could

result in damage to the equipment or

other property�

2.1 Safety Alert Symbol

And Safety Words

2.2 Operational Hazards

^ WARNING

Prevent serious injury or death�

Read and understand this manual before

operating the drop saw�

Always stop engine and remove key

before leaving operators seat�

Never allow anyone near the drop saw

during operation�

Travel at a safe speed�

^ WARNING

Prevent serious injury or death from

moving parts�

Moving parts can crush and dismember�

Do not operate without guards and

shields in place�

Disconnect and lock out power source

before adjusting or servicing�

^ WARNING

Use drop saw only for the designed

applications�

Any other use may result in personal

injury, damage to equipment and may

void the warranty�

^ WARNING

Prevent serious injury or death�

Verify drop saw is attached to excavator

before operation or transport�

^ WARNING

Protect from ying debris.

Wear proper safety glasses, goggles,

or a face shield to protect from ying

debris�

Carefully read all safety messages in this manual

and on equipment safety signs. Keep safety signs

in good condition and replace missing or damaged

safety signs.

New equipment components and repair parts must

include the current safety decal.

Learn how to properly operate equipment.

NEVER operate or work around this equipment

without proper instruction, while fatigued or under

the inuence of alcohol, prescription or non-

prescription medication or if feeling ill.

Keep your equipment in proper working condition.

Know the regulations and laws that apply to you

and your industry. This manual is not to replace

any regulations or laws. Additional information

may be found at: www.asae.org or www.osha.gov.

If you do not understand any part of this manual,

contact Baumalight at 866-820-5603.

Prepare For Emergencies

• Be prepared in case of emergencies.

• Keep a re extinguisher and rst aid kit close

to the machine.

• Keep emergency phone numbers close to your

phone.

• Know your address so emergency services

can locate you if an emergency arises.

Replace Safety Signs

• Replace missing or damaged safety signs.

• Safety signs are identied in Section 3 of this

manual.

• Replacement safety signs are available from

your Baumalight dealer.

Do Not Allow Riders

• NEVER lift or carry anyone on the drop saw.

• NEVER use drop saw as a work platform.

• NEVER allow passengers on the drop saw.

Lower Operating Speed

• Keep drop saw low and move at slow speeds

on rough or uneven terrain.

Avoid Rollover

The equipment may rollover, resulting in death or

serious injury. To help prevent rollover:

• Travel at a slow speed.

• Avoid sharp turns & sudden movement on

slopes.

• Carry drop saw close to the ground.

• Avoid holes, ditches and other obstructions

which may cause equipment to rollover.

• Use caution when operating on slopes and do

not operate on excessively steep slopes.

• Do not exceed load capacity of equipment.

Avoid Powerlines &

Underground Utilities

^^ DANGER

Prevent electrocution�

Death or serious injury can result if

equipment comes near or contacts

power lines�

Electrocution can occur without direct

contact�

DO NOT leave the operator’s seat if any part of the

equipment contacts electric lines or cables.

Detach Drop Saw Safely

Detach drop saw on a rm and level surface. Drop

saw may fall over if detached on sloping or soft

surface. Be sure people, livestock and pets are

clear of machinery.

Relieve hydraulic pressure before disconnecting

hydraulic hoses. See your excavator Operator’s

Manual.

Raised Attachment

^ WARNING

Crushing hazard�

Raised, unsupported drop saw can fall,

resulting in death or serious injury�

Never enter the area under a raised

Drop Saw�

A raised drop saw can lower unexpectedly,

resulting in death or serious injury.

NEVER enter area under a raised drop saw.

Lower drop saw to ground, engage parking brake,

shut off engine and remove key before servicing.

Avoid Loud Noise

^ WARNING

Prolonged exposure to loud noise can

cause impairment or loss of hearing�

Wear a suitable hearing protective

device such as earmuffs or earplugs

to protect against objectionable or

uncomfortable loud noises�

Hazards From Modifying

Equipment

Do not make any alterations to your drop saw.

Altering the equipment may cause unsafe

conditions and may void the manufacturer’s

warranty.

Avoid Wood Dust

Inhalation

^ WARNING

Wear an approved respirator (N95 Type

as a minimum)�

Follow local, state and federal

regulations�

The health effects from exposure to wood dust

are due to chemicals in the wood or chemical

substances in the wood created by bacteria, fungi,

or molds.

Avoid High Pressure

Fluids

^ WARNING

Pressurized uids can penetrate the

skin�

Hydraulic hoses can fail from age,

damage and exposure�

Use body and face protection while

searching for leaks� A tiny, almost

invisible leak can penetrate the skin,

thereby requiring immediate medical

attention�

Use wood or cardboard to detect

hydraulic leaks, never use your hands�

Escaping uid under pressure can penetrate the

skin causing serious injury.

Prevent the hazard by relieving pressure (See

Excavator Operator’s Manual.) before connecting

or disconnecting hydraulic lines. Verify all

connections are tight before applying pressure.

Search for leaks with a piece of cardboard or wood.

Protect hands and body from high pressure uids.

If an accident occurs, see a doctor immediately.

Any uid injected into the skin must be surgically

removed within a few hours or serious infection

may result.

^ WARNING

Crushing hazard�

Before performing inspections, service

or maintenance:

Park machine on rm, level surface.

Engage parking brake�

Turn engine off and remove key�

Place “Do Not Operate” tag on control

panel�

^ WARNING

Burn hazard�

Hot and high pressure hydraulic oil�

Allow oil to cool before servicing�

2.3 Maintenance Hazards

Before servicing, park machine on a rm and level

surface, remove key, set parking brake and place

a “Do Not Operate” tag on control panel. Read and

understand this manual. If you do not understand

any part of the manual, contact Baumalight at 866-

820-5603.

Always wear face and/or eye protection, safety

shoes, and other protective equipment appropriate

for the job.

Do not make unauthorized modications. Contact

Baumalight at 866-820-5603 before you weld, cut/

drill holes, or make any other modications.

Always use Baumalight replacement parts.

^ WARNING

Moving parts can crush and cut�

Keep clear of moving components�

Follow lockout procedure before

servicing�

^ WARNING

Entanglement hazard�

Keep clear of moving components�

Wear proper protective equipment

appropriate for the job�

A. D005253 ^ WARNING - Pressurized uid

hazard. Pressurized uids can penetrate the skin.

Do not check for leaks with your hands. Keep back

a safe distance when pressurized.

D005253

B. D005262

WARNING: This product can expose you to chemicals

including 1,3-Butadiene and lead, which are known to the state of

California to cause cancer and birth defects or other reproductive

harm. For more information go to www.P65Warnings.ca.gov.

D005262

3 SAFETY

DECALS

The two and four panel safety decals are pictorial

and have a yellow background. The panel with a

triangle indicates the potential hazard. The panel

without a triangle indicates how to avoid the

hazard.

If any of the decals are missing, are damaged, or

if you do not understand the decal, please contact

your dealer.

Tabla de contenidos

Otros manuales de Sierra de Baumalight

Baumalight

Baumalight DXA Manual de usuario

Baumalight

Baumalight DPH530 Manual de usuario

Baumalight

Baumalight DXH752 Manual de usuario

Baumalight

Baumalight DXM530 Manual de usuario

Baumalight

Baumalight DSA530 Manual de usuario

Baumalight

Baumalight DXA530 Manual de usuario

Baumalight

Baumalight DSM230 Manual de usuario

Manuales populares de Sierra de otras marcas

RIDGID

RIDGID BS1400 Manual de usuario

ATIKA

ATIKA BWS 400-2 Manual de usuario

RGC

RGC FS20 Manual de usuario

Makita

Makita M2300 Manual de usuario

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manual de usuario

IMET Spa

IMET Spa SIRIO 370 AF-E Manual de usuario

Optimum

Optimum OPTisaw CS 275 Manual de usuario

Makita

Makita BPB180 Manual de usuario

Stihl

Stihl MS 462 C-M Manual de usuario

AEG

AEG TS 250 K Manual de usuario

Meec tools

Meec tools 004665 Manual de usuario

Makita

Makita LS1018L Manual de usuario

Ryobi

Ryobi RCS1400 Manual de usuario

DeWalt

DeWalt DCS391 Manual de usuario

Sealey

Sealey SA72 Manual de usuario

skilsaw

skilsaw SPT88 Instrucciones de montaje

Urrea

Urrea SI810 Dimensiones y guía de instalación

EINHELL

EINHELL BKG 210/1 Manual de usuario