8www.euromasterbg.com
WARNING, DANGER!
Unprotected work with the workpiece or to touch
the moving parts of power can lead to severe physical
injuries and noise impact to hearing damage if not
complied with the rules listed below and those in the
“Safety Instructions.”
Safety requirements
Before attempting to work with power tools is
necessary to illustrate the following:
- Is the voltage of the grid corresponds to that
marked on the plate with technical details of power;
- Check to see how is the breaker. Vibroshlayfat
must be joined and separated from the supply
network only when off switch.
- The reliability of the power cord and plug.
Follow AT WORK REQUIREMENTS FOR
SAFETY
Always use safety glasses.
Use tools for sound protection.
Use prahozashtitna mask.
- It is recommended to use protective gloves.
- Include vibroshlayfat under load.
- Keep the power cord outside the scope of
vibroshlayfa.
- Look for a permanent safe and sustainable state
of his body.
- Secure the workpiece in the vise or other
suitable method.
- Disconnect the plug from the outlet before
making any adjustments, repair or maintenance.
- Power should not be used outdoors in rainy
weather, in damp environments (after rain) or near
ammable liquids and gases. Workplace should be
well lit.
- Power is designed to work in areas and areas
under normal re danger “Regulation 2” Fire-building
and technical standards. Izpolzvaneto not allowed
him to re and explosive environments where the
ambient air temperature above 40C, particularly
in moist environments where there is rainfall and
chemical active environment. Workplace should be
well lit.
- Information on noise and vibration:
- Sound pressure level LpA = 75 dB (A)
- Level of sound power LwA = 86 dB (A)
KPA: 3dB(A) KWA: 3dB(A)
- Level of vibration ah = 3.79 m/s2
K: 1.5 m/s2
Information for safe handling of vibroshlayfa
During operation sander must be held rmly with
both hands.
During the sanding of wood and metal surfaces
painted with paints with the addition of lead, may
appear harmful or toxic dust. Contact or inhalation
of such dust may endanger the health of workers
or bystanders. Must use appropriate personal
protective equipment, such as: lter semi-mask and
goggles. Should include installation and removal of
dust.
• Pregnant women and children not to enter any
premises in which using a sander to remove paint
containing lead compounds.
In the room in which using a sander to remove
paint containing lead compounds should not eat,
drink or smoke.
Avoid the use of long extension.
• Keep electric power cable outside the scope of
the moving parts of machinery. Make sure he always
passes behind
• Before storing the machine, turn off the engine
and make sure that all moving parts have stopped
their movement.
• Work with fully developed power cord, safely
extended, with capacity of 16 A.
• If the cable is damaged or cut during the
operation, do not touch. Immediately disconnect the
plug, never use a machine with a damaged cable.
It must be replaced by a new one from a qualied
person.
• During a contact, make sure the machine is
turned off
• “Rider” can not guarantee awless operation of
the power only if they are running genuine accessory
device.
• The camera is not suitable for wet sanding
• Do not grind materials containing asbestos
• The camera is not suitable for use by persons
under 16 years of age.
• In case of electrical or mechanical malfunction,
disconnect the device immediately and disconnect
the electrical contact network
• When sanding metal sparks are formed. Do not
use a vacuum cleaner and keep others and igniting
material outside the scope of action
• Do not touch the sanding sheet.
• Do not use worn, torn or heavily soiled sheets
sanding.
• Wear protective gloves, safety goggles,
ear protectors, adherent body clothing and take
precautions for your hair (if long hair)
• When using sanding machines located over the
head of the operator are subject goggles.
• Before making any adjustment or change of
