3
BATHOLOGY
by
Carefully review all
installation options and instructions
before proceeding.
For safety purposes, use
safety goggles at all times.
Do not hot swap any
electrical components. This will void
the warranty, and likely cause the
product to fail. Fully disconnect theFully disconnect the
system from its power source beforesystem from its power source before
swapping any electrical components.swapping any electrical components.
Check for piping /
electrical before cutting or drilling.
Some electrical
components are not waterproof.
If there is any risk of
uninsulated electrical connections in
your wall / ceiling area, use insulating
gloves.
The splitters should be
kept in an accessible location when
installed. Only use the splitters
provided when assembling the
Brilliance light fixtures and components
of this kit.
The Spectrum 441D
Sauna White Light System can be
controlled by the use of a light switch
provided by others. NEVER place a
switch where it can be reached from a
tub or shower.
All wiring must be done in
accordance with National Electric Code
and local building code.
The Spectrum 441D White
Light System should be installed by a
licensed, qualified electrician.
Consider light placement
carefully. The fixture(s) for this system
should be placed to avoid direct contact
with the bather’s eyes.
Splitters should be kept in
a dry accessible location when installed.
Only use the splitters provided when
assembly brilliance light fixtures and
components of this kit.
Both “OUT” ports of a
splitter must be used. An open splitter
connection will prevent the lights from
turning on. Fully disconnet the power
supply of this system from its power
source before changing any lights.
Installation ConsiderationsInstallation Considerations
Please read this manual in its entirely prior to installationPlease read this manual in its entirely prior to installation
! IMPORTANT
! IMPORTANT
! IMPORTANT
! IMPORTANT
! IMPORTANT
IMPORTANT:IMPORTANT: DO NOT HOT SWAP ANY ELECTRICALDO NOT HOT SWAP ANY ELECTRICAL
COMPONENTS. This will void the warranty, and likely cause theCOMPONENTS. This will void the warranty, and likely cause the
product to fail.product to fail.
