Batca S-9 Manual de usuario

www.batcafitness.com S-9 Owner’s Manual

S-9

January 2006

Revision 1

January 2006January 2006

Revision 1

Record Serial Number Here

Batca Fitness Systems

Tel. (919) 255-1233

www.batcafitness.com

Date of Purchase

Owner’s Manual

Shoulder Press

Batca Fitness Systems 2 S-9 Owner's Manual

__________ Page

Instructions 2

Parts Listing 3

Hardware Comparison 4-7

Main Assembly 8-12

Upholstery 13

Cable Routing 14-15

Congratulations on the purchase of your new Batca S-9. This gym will provide you with a lifetime of enjoyment to meet your

strength training needs. Batca Fitness Systems strives to build the best quality gyms and to package these gyms in such a way to

avoid any damage during shipping.

In order to get started with your assembly you should first familiarize yourself with this manual. It is recommended that you

read through each step thoroughly before you begin. Begin by opening your boxes and separating all of your parts. Verify that all

parts are accounted for and have no damage. When all parts are accounted for, you may begin your assembly. Some items may

have been pre-assembled for your convenience. Please note that hardware quantities shown reflect total quantities for your gym and

may not reflect actual quantities in each bag. Assemble your gym on a solid level surface. This will ensure the best possible perform-

ance, function, and safety for the gym and your workout.

Assemble your gym according to the step by step instructions found in this manual. Failure to do so will void your warranty

and may result in personal injury. After assembly, you should check each station to ensure correct operation. If a problem arises,

recheck your assembly with these instructions to verify correct assembly. If you are unable to correct a problem or have questions

with your assembly please contact your authorized Batca dealer.

Batca Fitness Systems has built this gym to give you a safe, effective and enjoyable workout. However,

there is a risk assumed by individuals who use this type of equipment. It is very important that all warnings and

instructions are read and followed before beginning any exercise program.

It is also very important to read and follow the preventative maintenance schedule described in this

manual. If any of the warning labels or stickers are worn, faded, torn, scratched or missing they should be replaced

immediately.

WARNING:There is a risk assumed by individuals who use this type of equipment. To minimize risk

always follow these rules.

1) It is essential that you consult with your physician before beginning any exercise program.

2) Inspect equipment before each use for loose, worn, or frayed parts (including cables, nuts and bolts). Replace

parts at first signs of wear (use only genuine BATCA replacement parts). Use of equipment that is damaged,

worn, frayed or not completely assembled on a solid, level surface may result in injury.

3) Make sure all adjustment pins are fully engaged before using equipment.

4) Keep all parts of the body and clothing outside the path of any moving parts of the gym. Be alert to the

possibility of injury. Do not be careless.

5) Minors and children should not be allowed to play on or around this gym.

6) If you have any questions on proper use or maintenance of this gym, do not hesitate to call your local BATCA

FITNESS SYSTEMS distributor or BATCA FITNESS SYSTEMS at (919) 255-1233. www.batcafitness.com

__________ Page

Final Assembly and Troubleshooting 16

Cable Tension and Adjustments 17

Maintenance 18

Warranty 19

Floor Plan Layout 20

Table of Contents

Instructions

Warning

www.batcafitness.com 3 S-9 Owner’s Manual

Frame Components Accessories

Upholstery

Hardware

Cables

Tools Required

• 9/16” Wrench

• 3/4” Wrench

• 9/16” Ratchet

• Allen Wrench Set

• Tape Measure

ITEM NO. PART NUMBER DESCRIPTION QTY.

2 BFM-10428 Shoulder Arm 1

4 BFM-10388 Short Cage 1

5 BFM-50527 Guide Rod 2

7 BFM-50615 Guide Rod Plate 1

8 BFM-10430 Weight Plate 19

9 BFM-10413 3/4" 10lb Top Plate 1

10 BFM-10387 Base Connector 1

11 BFM-10412 Pulley Holder 1

12 BFM-50531 Shroud 1

13 BFM-50638 Counter Weight 2

14 BFM-10385 Shoulder Press Frame 1

15 BFM-10386 Elbow Support 1

16 BFM-10153 Chrome Pad Adjustment 1

22 BFM-50345 Pulley Cover 1

24 BFM-50150 Anti-Deflection Plate 1

25 BFM-50126 Anti-Deflection Plate 2

26 BFM-50247 5/8” Spacer 2

57 BFM-50635 Selector Shaft 1

ITEM NO. PART NUMBER DESCRIPTION QTY.

17 BFU-10118 Bottom Pad 1

18 BFU-10119 Head Pad 1

19 BFU-10120 Back Pad With Lumbar 1

ITEM NO. PART NUMBER DESCRIPTION QTY.

28 BFC-50127 Magnetic Weight Stack Pin 1

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 BFH-50171 Side Mounted Flange Bearing 2

3 BFH-50253 Beveled Leveler 1

6 BFM-50529 Rubber Donut 2

20 BFH-50174 4 1/2" Pulley 3

21 BFH-50173 3 1/2" Pulley 3

23 BFH-50530 5" Pulley 1

27 BFH-50210 Gas Spring 1

29 BFH-50199 Rubber Grommit 2

30 BFH-50146 3/8" Flat Washer (Black) 44

31 BFH-50157 3/8"-16 Nylock (Black) 22

32 BFH-50201 1/2" Pulley Spacer 6

33 BFH-50147 3/8" Lock Washer (Black) 10

34 BFH-50267 5/16"-18 Nylock (Black) 1

35 BFH-50250 1 1/4" Shoulder Bolt 1

36 BFH-50126 HCS 3/8"-16 X 3 1/4" P5 4

37 BFH-50127 HCS 3/8"-16 X 3 1/2" P5 2

38 BFH-50128 HCS 3/8"-16 X 3 3/4" P5 2

39 BFH-50125 HCS 3/8"-16 X 3" P5 2

40 BFH-50130 HCS 3/8"-16 X 4 1/4" P5 2

41 BFH-50124 HCS 3/8"-16 X 2 3/4" P5 4

42 BFH-50122 HCS 3/8"-16 X 2 1/4" P5 4

43 BFH-50121 HCS 3/8"-16 X 2" P5 2

44 BFH-50129 HCS 3/8"-16 X 4" P5 4

45 BFH-50119 HCS 3/8"-16 X 1 1/4" P5 2

46 BFH-50254 HCS 3/8-16 X 3/4” P5 4

47 BFH-50149 3/8”-16 Jam Nut (Zinc) 1

48 BFH-50255 Rubber Foot 5

53 BFH-50118 HCS 3/8"-16 X 1" P5 4

54 BFH-50227 Cable Strap 1

ITEM NO. PART NUMBER DESCRIPTION QTY.

52 CAB-12008 Wt. Stack to Shoulder Press Cable 1

Batca Fitness Systems 4 S-9 Owner's Manual

Bolt Length Note: Bolt length is measured from

the underside of the head of the bolt.

www.batcafitness.com 5 S-9 Owner’s Manual

Batca Fitness Systems 6 S-9 Owner's Manual

www.batcafitness.com 7 S-9 Owner’s Manual

Batca Fitness Systems 8 S-9 Owner's Manual

Step 1:

Note: For a more consistent appearance, position all bolts in the direction shown in each figure.

• All Flat Washers and Nylocks are

3/8” unless otherwise noted.

Figure 1

PLEASE FOLLOW ALL DIRECTIONS VERY CAREFULLY FOR PROPER

INSTALLATION.

Item # Part # Description Qty

3 BFH-50253 Beveled Leveler 1

4 BFM-10388 Short Cage 1

10 BFM-10387 Base Connector 1

14 BFM-10385 Shoulder Press Frame 1

24 BFM-50150 Anti-Deflection Plate 1

25 BFM-50126 Anti-Deflection Plate 1

30 BFH-50146 3/8" Flat Washer (Black) 8

31 BFH-50157 3/8"-16 Nylock (Black) 4

36 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 2

39 BFH-50125 HCS 3/8"-16 x 3" P5 2

47 BFH-50149 3/8"-16 Jam Nut (Zinc) 1

48 BFH-50255 Rubber Foot 5

www.batcafitness.com 9 S-9 Owner’s Manual

Figure 2

Step 2:

All Flat Washers and Nylocks are 3/8” unless otherwise noted.

Item # Part # Description Qty

15 BFM-10386 Elbow Support 1

25 BFM-50126 Anti-Deflection Plate 1

30 BFH-50146 3/8" Flat Washer (Black) 8

31 BFH-50157 3/8"-16 Nylock (Black) 4

36 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 2

39 BFH-50125 HCS 3/8"-16 x 3" P5 2

Batca Fitness Systems 10 S-9 Owner's Manual

Step 3:

Figure 3

All Flat Washers and Nylocks are 3/8” unless otherwise

Figure 3A

Item # Part # Description Qty

5 BFM-50527 Guide Rod 2

6 BFM-50529 Rubber Donut 2

7 BFM-50615 Guide Rod Plate 1

8 BFM-10430 Weight Plate 19

9 BFM-10413 3/4” 10lb Top Plate 1

11 BFM-10412 Pulley Holder 1

23 BFH-50530 5" Pulley 1

28 BFC-50127 Magnetic Weight Stack Pin 1

30 BFH-50146 3/8" Flat Washer (Black) 6

31 BFH-50157 3/8"-16 Nylock (Black) 3

37 BFH-50127 HCS 3/8"-16 x 3 1/2" P5 2

42 BFH-50122 HCS 3/8"-16 x 2 1/4" P5 1

57 BFM-50635 Selector Shaft 1

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual