Bartscher KB565 Manual de usuario

KB565

A120355

Bartscher GmbH

Franz-Kleine-Str. 28

D-33154 Salzkotten

Germany

Phone: +49 5258 971-0

Fax: +49 5258 971-120

Service hotline: +49 5258 971-197

www.bartscher.com

Version: 1.0

Date of preparation: 2019-10-21

Original instruction manual

A120355 3 / 9

Technical Specifications

Name:

Can opener KB565

Item No.:

A120355

Material:

Stainless steel, plastic

Material of blade:

Stainless steel

Surface material:

Stainless steel

Max. container height, in mm:

565

Max. worktop thickness, in mm:

Dimensions of surface, in mm:

131 x 294

Dimensions (W x D x H), in mm:

125 x 290 x 940

Weight in kg:

2,5

We reserve the right to implement technical modifications!

Version / Characteristics

•Crank drive with spring mechanism

•Clamp fastening (prepared for screw fastening)

Height-adjustable

Auxiliary Equipment (not included in the delivery)

Transport wheel KB565

Spare transport wheel for can opener

KB565

•Material: steel, chrome-plated

•Dimensions: W 39 x D 39 x H 10

•Weight: 0.08 kg

Art. No. A120357

Blade KB565

Spare blade for can opener KB565

•Material: stainless steel

•Dimensions: W 66 x D 36 x H 76

•Weight: 0.1 kg

Art. No. A120356

4 / 9 A120355

List of Components of the Appliance

Fig. 1

1. Crank

2. Crank handle

3. Bearing

4. Square pipe

5. Clamp handle

6. Cap

7. Eye bolt

8. Clamp plate

9. Clamp attachment

10.Blade

11.Transport wheel

12.Screws in the blade handle

Intended Use

The can opener is designed for opening cans up to a height of 565 mm.

A120355 5 / 9

Assembly

Fig. 2

Fig. 3

1. Place the clamp attachment on an

even, non-slip surface.

2. Turn the eye bolt until the surface

for placing cans will be screwed well

to the tabletop.

3. The clamp attachment may be

additionally attached to the tabletop

with 3 bolts by screwing them into

designated holes.

4. Insert the square pipe of the can

opener to the hole in the clamp

attachment. Put a cap on a lower

end of the square pipe.

5. The square pipe may be set at

different heights, depending on the

can.

Fig. 4

Opening of Cans

1. Before the first use, make sure that the stainless steel blade and transport wheel

are clean, because they will come into contact with food. Observe the

instructions included in section “Cleaning”.

2. Before opening, clean the can’s lid with a moist cloth.

6 / 9 A120355

Fig. 5

Fig. 6

3. Pull the square pipe upwards and

place the can on the clamp

attachment, so that it stands directly

next to the pipe and below the

transport wheel.

4. Press firmly the crank to cut

through the can’s lid with the blade.

5. Press the crank onto the centring

plate in order to set the right

position of the can's rim, between

the blade and the cutting surface.

Fig. 7

Fig. 8

6. When the can's lid is punctured,

press the crank to the horizontal

position.

The distance between the blade and the

transport wheel is diminished. The can is

tightly clamped between the blade and

the transport wheel.

7. To open the can, turn the crank in

the direction pointed by the arrow.

A120355 7 / 9

8. When the can is opened, lift the

crank (Fig. 9).

9. Remove the opened can from the

clamp attachment (Fig. 10).

Fig. 9

Fig. 10

Cleaning

1. Clean the can opener regularly after the end of each working day, or more

frequently if needed.

2. Clean the transport wheel in the case of more stubborn soiling with the use of a

dish-washing brush or a toothbrush.

3. Wipe with a clean cloth to remove the cleaning agent residues.

4. Wipe the remaining elements of the appliance with a soft, moist cloth.

5. To end with, dry the elements to leave them to dry in open air.

8 / 9 A120355

Cleaning of Blade

Fig. 11

Fig. 12

1. Press the crank in the presented

direction, to disassemble the blade

mechanism.

2. To clean the blade, remove it from

the handle. Proceed the following

way:

–Unscrew the screws in the blade

handle.

–Pull out the blade from the handle.

CAUTION! Injury hazard!

The blade is very sharp!

Use gloves resistant to cutting during cleaning of the blade.

3. Clean the blade with soft, moistened cloth and gentle cleaning agent.

4. Reinsert the blade.

5. Fix the blade in the handle and fasten the screws again.

A120355 9 / 9

Maintenance

1. If used intensively, the can opener blade and the transport wheel may get

deformed, thus they should be controlled regularly. If the elements are worn out,

replace them by contacting the service company.

2. Control the blade handle regularly, and tighten the screws if necessary.

Possible Malfunctions

Problem

Possible Cause

Solution

The crank does not turn

or turns with a resistance.

Food residues on the

transport wheel.

Clean the transport wheel

with a toothbrush.

The can cannot be

opened.

Damaged blade.

Contact the service

company.

Damaged transport

wheel.

Contact the service

company.

Loose screws of the

blade handle.

Tighten the screws in the

blade handle.

The can opener swings

during operation.

Loose clamp attachment.

Tighten the clamp

attachment.

The can slides during

rotation of the crank.

The slanting toothing is

deformed.

Contact the service

company.

There may be food on the

drive.

Check and clean the

drive.

Este manual sirve para los siguientes modelos

Otros manuales de Abrelatas de Bartscher

Bartscher

Bartscher KB330 Manual de usuario

Manuales populares de Abrelatas de otras marcas

Clatronic

Clatronic DO 2852 Especificaciones técnicas

Coopers

Coopers Can Magic Manual de usuario

Black & Decker

Black & Decker LIDS OFF JW260 Instrucciones de instalación

Oster

Oster 3118 Manual de usuario

Emerson

Emerson BO61 Manual de usuario

Black & Decker

Black & Decker Gizmo EM200 Series Instrucciones de instalación

Hamilton Beach

Hamilton Beach 76606 - Pop-Top Electric Can Opener Manual de usuario

Kalorik

Kalorik USK DO 36918 Manual de usuario

Black & Decker

Black & Decker CO451 Instrucciones de instalación

Hamilton Beach

Hamilton Beach Walk-n-Cut 76503 Manual de usuario

Hamilton Beach

Hamilton Beach 76370 - Extra Tall Can Opener Manual de usuario

Kenwood

Kenwood CA-P70 Manual de usuario

Hamilton Beach

Hamilton Beach Open Ease Can Openers Manual de usuario

Black & Decker

Black & Decker EC100 Series Instrucciones de instalación

Windmere

Windmere WCO103S Instrucciones de instalación

Rival

Rival CN-742 Manual de usuario

aidapt

aidapt Spill Not Manual de programación

Orbegozo

Orbegozo CU 6500 Manual de usuario