Barron Games Catch the Light Combo Manual de usuario
SKU#: BG-CCL007
Catch the Light Combo
Instruction Manual
Assembly, Operation, and Care Instructions
Serial #:
Distributed By:
Sales Person:
Technical Service #:
+1-716-866-0054
v.070616
Catch the Light Combo
Instruction Manual
Inspect Immediately after
Transporting the Product
After receiving the shipment, inspect the product thoroughly to ensure
that it has been shipped with care. Before turning the power on, please
check the following:
Check the cabinet for damage or shifting that may have occurred
during shipping. Are there any dented portions or defects (cuts, etc.)
on the external surfaces of the cabinet?
Are all the legs intact?
Do the power supply voltage and frequency requirements meet with
those of the location (110V/220V)?
Are all wires linked correctly and securely connected to each other?
If coupled in an incorrect manner, the connection will not be made
accurately and it could cause not only irreparable damage to the
machine, but also is a potential fire hazard. DO NOT INSERT
CONNECTORS FORCIBLY.
Check that the all the cables, including power cables, are undamaged.
Do power cables or other wires have any splices, cuts, or dents?
Have you been provided with all of the associated accessories? Tip:
Most of the pieces required to assemble the table are shipped within
the table. Use your table keys to unlock the table and check parts for
damage or other problems.
Can all doors/lids be opened with the accessory keys? Can doors/lids
be firmly closed? Does the coin box key open the coin box(es)?
Catch the Light Combo
Instruction Manual
service@barrongames.com 1 For assistance call: 1+(716) 866-0054
Safety Instructions
This equipment may contain hazardous voltage which can cause electrical
shock. Only qualified personnel* should work inside the equipment.
*Note: Keep reading for a list of qualified personnel.
To maintain personal safety and the safe operation of this product, read the
entire manual before using it. The following instructions are intended for the
users, operators, and the personnel in charge of the operation of the
machine. Be sure to keep this manual close to the product or in a
convenient place for future reference.
IMPORTANT NOTICES
This product is intended for indoor use only
This is NOT a child’s toy; adult supervision is required for children to play this
game. Children under 106 cm (roughly 3.5 ft) in height should not approach
the table while it is in use, as this could be hazardous.
Do not sit, climb, or lean on the table. Do not place anything, including
people, on the top of the playfield surface.
Do not drag the table when moving it, as this could damage the legs, cabinet
beyond repair.
Do not place any food or drinks on the table. Use the cup holders, if provided.
This game features flashing lights which may not be suitable for
photosensitive epilepsy.
Catch the Light Combo
Instruction Manual
service@barrongames.com 2 For assistance call: 1+(716) 866-0054
Definition of Site Maintenance Personnel
or Other Qualified Individuals
Replacing parts, maintenance inspections, and troubleshooting should be carried out by Site
Maintenance Personnel or other Qualified Professionals. This manual includes directions
for potentially dangerous procedures which should only be performed by professionals with
appropriate and specialized knowledge.
The Site Maintenance Personnel or other Qualified Professionals mentioned in this
manual are defined as follows:
Site Maintenance Personnel: Individuals with experience in maintaining amusement
equipment, vending machines, etc., working under the supervision of the owner and/or
operator of this product. Maintenance Personnel frequently service machines within
amusement facilities or similar premises by carrying out everyday procedures such as:
assembly, maintenance inspections, and replacement of units or replaceable parts.
oActions Approved for Site Maintenance Personnel: Machine assembly, maintenance
inspection, and replacement of units or replaceable parts.
Other Qualified Professionals: Personnel employed by the amusement equipment
manufacturer. Personnel may also have been involved in design, production, testing, or
maintenance of said amusement equipment. This individual should have either graduated
from a technical school or hold similar qualifications in electrical, electronics, or mechanical
engineering.
oActions Approved for Other Qualified Professionals: Assembly, maintenance,
inspection, and replacement of units or replaceable parts for amusement equipment
and/or vending machines, including repair or adjustments of electrical, electronic, or
mechanical parts.
WARNING
Servicing and maintenance work of the contents herein stated should be performed
by the SERVICEMAN stipulated as per IEC Standard. Those who do not have technical
expertise and knowledge other than the SERVICEMAN are not allowed to perform
the work herein stated. Executing the aforementioned work by such non-technical
personnel can cause serious accidents that may endanger life.
Catch the Light Combo
Instruction Manual
service@barrongames.com 3 For assistance call: 1+(716) 866-0054
Before Using This Product
Please be sure to read the following before using this machine, in order to ensure the safe
operation of this product. The following instructions are intended for users, operators, and
personnel in charge of the operation and maintenance of the machine. After carefully reading
and sufficiently understanding the warning displays and cautions, please handle the machine
appropriately. Be sure to keep this manual for future reference.
Qualified Personnel: Only personnel who have technical expertise should perform the work
stated herein to avoid hazardous situations. The instructions state that site maintenance
personnel should be the only personnel performing work. Please perform maintenance work in
accordance with the stated instruction; provided instructions for maintenance work are to
minimize risk and prevent accidents. Failing to perform work as stated within the Instruction
Manual may potentially be dangerous to both maintenance personnel and users.
Be sure to turn off the power before working on the machine. To prevent electric
shock, be sure to turn the power off before carrying out any work that requires direct contact
with the interior of the product. If the work is to be performed in the power-on status, the
Instruction Manual will state to do so.
Be sure to ground the Earth Terminal. This is not required in the case where a power
cord with earth/ground is used.
Ensure the power supply used is equipped with an Earth Leakage Breaker. This
product does not incorporate an Earth Leakage Breaker. Using a power supply which is not
equipped with an Earth Leakage Breaker can cause a fire when or if earth leakage occurs.
Before installing the product, check for electrical specifications; the product must
meet the requirements. Ensure the product is compatible with the power supply voltage
and frequency requirements of the location. Using any electrical specifications that are
different from the designated specifications can cause a fire and/or electric shock.
Install and operate the product where appropriate lighting is available, allowing
warning and safety labels to be read clearly. To ensure customer safety, labels and
printed instructions describing potentially hazardous situations are applied to places where
risk for potential accidents are increased.
If any label is peeled off, apply it again immediately. Please contact Barron Games
new stickers or parts. Visit www.BarronGames.com for more information about Barron Games’
Parts and Service Department.
Catch the Light Combo
Instruction Manual
service@barrongames.com 4 For assistance call: 1+(716) 866-0054
INSTALLATION AND MAINTENANCE SAFETY
This product is an indoor game machine. Do not install it outside. Even
indoors, avoid installing it in the places mentioned below, so as to avoid causing
a fire, electric shock, machine malfunction, or even death. Do not install or
maintain this product in/on/within/near:
places subject to rain or water leakage, places subject to high humidity, or in
the proximity of an indoor swimming pool, shower, steam room, etc.
places subject to direct sunlight, places subject to high temperatures, or in the
proximity of heat dispensing units or portable heating devices.
places filled with inflammable gas, within the vicinity of highly flammable or
volatile chemicals, or other hazardous materials.
dusty places.
sloped surfaces.
places subject to any type of violent impact.
the vicinity of anti-disaster solutions, such as fire exits and extinguishers.
places where the operating (ambient) temperature range is not 5°C to 30°C
(41°F to 86°F).
places near water or spray from water (such as a jet wash, hot tub, or
swimming pool).
To ensure maximum safety for the users and service personnel,
ensure that where the product is operated has sufficient
lighting to allow all safety labels to be read clearly. Operation
under insufficient lighting is not advised.
Catch the Light Combo
Instruction Manual
service@barrongames.com 5 For assistance call: 1+(716) 866-0054
ASSEMBLY
1. Read this Instruction Manual carefully before assembling or playing.
2. Ensure that there is sufficient space to place and shift the product prior to
assembly
3. Two adults are recommended to assemble the product.
4. Inspect and ensure all parts are securely attached before rotating the table.
5. Please Note: Children and pets should be kept away from assembly and game
pieces; this table contains small parts and balls that could be a potential choking
hazard.
6. This machine is supplied with a full range of accessories to help you get started
right away. Key sets for 2 locks, a preinstalled SD card, 4 legs, and 12 leg bolts
should be included with your table.
TOOLS NEEDED
Catch the Light Combo Instruction Manual
Ratchet or Wrench
*Note: Please retain the original packaging, so that it may be used for storage or transport later.
Catch the Light Combo
Instruction Manual
service@barrongames.com 6 For assistance call: 1+(716) 866-0054
Assembly –Step 1(Unpack the Game)
1. Place the machine near the desired location.
2. Remove the shrink/stretch wrap from the
package.
3. Cut the safety belt. Warning: The safety belt is
very taut and can harm you if it snaps back
while you’re cutting it. Use caution.
4. Cut the packaging tape and open the box
and gently remove the Styrofoam spacers.
Note: Your model table may be styled differently.
5. Remove the cardboard corner shields.
6. Cut down the corners of the cardboard.
Catch the Light Combo
Instruction Manual
service@barrongames.com 7 For assistance call: 1+(716) 866-0054
Assembly –Step 2(Assemble the Table)
1. A set of keys will be taped to the top or bottom
of the table, gently remove the tape and collect
the keys. Each keyhole has a different key. Once
turned the lock mechanism will pop open. The
locks will remain unlocked until the mechanism
is pushed back in.
2. Unlock the money box and remove it from
the machine. Inside the box you will find a
set of screws and a settings menu
description (also included in instruction manual)
3. Open the machine. All 4 legs will be on the right
hand side. Unscrew the 8 screws that mount the
safety tape securing the legs inside the machine.
4. Remove the legs from the internal cabinet.
Close the machine. Make sure that both
locks are pushed closed and the keys are
not inside the table.
5. Flip the machine so it stands on the side with the hinges. The locks should now be on the top of
the cabinet.
Catch the Light Combo
Instruction Manual
service@barrongames.com 8 For assistance call: 1+(716) 866-0054
Assembly –Step 2(Assemble the Table)
6. Install the legs. Notice that one of the legs is
different; there is an eyelet on the side. This leg goes
on the side with the cord, the eyelet acts as a guide
once the table is assembled.
7. To secure the bolt: place an expanded pad, a
spring pad, then a nut. When tightening the
nut, make sure that all the other holes on the
leg are aligned with the holes on the table.
8. At this point, only use one mounting point per leg
until the table is upright.
9. When all 4 nuts (one per leg) are tightly
secured, flip the table back to the correct
standing position.
10. Open the machine and insert the additional screws
(two more on each leg) from under the table.
11. Place an expanded pad, a spring pad, and then
the nut. Proceed to tighten all 12 mounting
points (4 bolts from Step 7 and 8 from Step 10)
Tabla de contenidos
Otros manuales de Juguete de Barron Games
