Barko 830B Manual de usuario
®
OPERATOR’S MANUAL
®
1 Banks Avenue • Superior • WI • 54880
Phone: 800-544-6532 • 715-395-6700
Fax: 800-772-2448 • 715-392-9348
Web: www.barko.com Email: [email protected]
MANUAL P/N
REVISION
DATE
Serial Number Range:
Machine Serial Number:
NOTE:
This Operator’s Manual includes precautions and procedures for safely operating your BARKO machine. This manual includes
limited service, repair and parts information. Separate BARKO Parts and Service Manuals are available from your BARKO
dealer or from BARKO directly.
Engine, attachment and other component information may be limited in this manual. See separate manufacturer manual(s)
which accompanies this BARKO machine from the factory.
The information and illustrations in this manual have been approved as accurate at the time of printing. However, this manual
may contain information on options not present on your loader. BARKO Hydraulics, LLC reserves the right to make changes
and improvements in its product at any time without notice or obligation.
800-00477
0
06/10/2019
WHEELED FELLER BUNCHER (WFB)
830B
11983025001 thru
®
SUPERIOR • WI • USA • www.barko.com
NOTE:
The beginning of each chapter has its own detailed table of contents.
MANUAL Table of Contents
CH-10 GENERAL INFORMATION 10-1
USE GENUINE BARKO PARTS 10-3
HYDRAULIC PRESSURE WARNING 10-4
INTRODUCTION 10-5
OTHER RESOURCES 10-6
UNAUTHORIZED PRODUCT CHANGES 10-6
KNOW YOUR BARKO 10-7
SAFETY SUMMARY 10-8
OPERATION ON SLOPED TERRAIN 10-12
WELDING SAFETY 10-13
FIRE PREVENTION 10-14
BARKO DEALER NET 10-16
PARTS TAB 10-16
MANUALS TAB 10-16
SERVICE TAB 10-17
ABBREVIATIONS 10-18
CH-13 MACHINE OVERVIEW 13-1
MODEL DESCRIPTION- 830B 13-4
WFB CONFIGURATIONS & SPECS 13-4
WFB COMPONENTS 13-5
QUICK REFERENCE PARTS 13-6
HYDRAULIC ref chapter 20 13-6
LIFT ARMS ref chapter 30 13-6
ATTACHMENT ref chapter 35 13-6
CAB ref chapter 40 13-7
FRAME- FRONT & BACK ref chapter 47 13-7
POWER PACKAGE ref chapter 60 13-7
RESERVOIR- FUEL & HYDRAULIC ref chapter 70 13-8
MACHINE SERVICE 13-9
SAFETY WHILE SERVICING 13-9
SERVICE & MAINTENANCE SCHEDULE 13-10
LUBRICATION & FLUID SPECIFICATIONS 13-14
FLUID & LUBRICATION POINTS 13-18
GENERAL TORQUE SPECIFICATIONS 13-20
NUT & BOLT IDENTIFICATION 13-20
TORQUE SPECS- UNC & UNF BOLTS (HHCS) 13-21
TORQUE SPECS- METRIC BOLTS (HHCS) 13-22
TORQUE SPECS- UNC & UNF BOLTS (SHCS) 13-23
TORQUE SPECS- METRIC BOLTS (SHCS) 13-23
NEW MACHINE BREAK-IN PROCEDURE 13-24
®
SUPERIOR • WI • USA • www.barko.com
OPERATION 13-25
MACHINE PRE-START UP 13-25
MACHINE START UP 13-26
MACHINE SHUT-DOWN 13-28
OPERATING & LOADING TECHNIQUES 13-29
CONTROL FUNCTIONS 13-31
TRANSPORTING 13-34
MACHINE STORAGE 13-35
CH-18 DECALS 18-1
DECALS- IWT DECAL PN 18-2
DECAL- HYDRAULIC PRESSURE QARNING 539-01246 18-2
DECAL- FIRE EXTINGUISHER 539-01112 18-2
DECAL- CENTRAL LUBE SYSTEM 539-00789 18-3
DECAL- IMPROPER ELECTRICAL CONN 539-00883 18-3
DECAL- HYDRAULIC OIL LEVER 539-00977 18-3
DECAL- HYDRAULIC OIL CAUTION 539-01247 18-4
DECAL- CRUSH SPINNING WARNING 539-01248 18-4
DECAL- FALLING TRANS WARNING 539-01249 18-5
DECAL- BULKHEAD LOCATIONS 539-01250 18-5
DECAL- DIESEL CAUTION WARNING 539-01251 18-5
DECAL- HOT EXHAUST WARNING 539-01252 18-6
DECAL- HYDRAULIC ONLY CAUTION 539-01253 18-6
DECAL- HOT AND PRESSURE WARNING 539-01254 18-6
DECAL- FIRE HAZARD/ PERSONAL INJURY 539-01369 18-7
DECAL- CAB LEFT POST COLUMN 539-01372 18-7
DECAL- CAB SIDE WARNING 539-01370 18-7
DECAL- CAB FRONT DUCT 539-01371 18-8
DECAL- WINDOW DOOR LOCK 539-01368 18-8
DECAL- CLEAN WITH WATER ONLY 539-00999 18-8
DECAL- STAY CLEAR (SMALL) 539-00896 18-9
DECAL- OPERATOR CONTROLS 539-01116 18-9
DECAL- FUSE/RELAY ELECTRICAL PANEL 539-01367 18-9
DECAL- BARKO LOGO 2.5”X17.25” 539-01244 18-10
DECAL- “830B” BLACK 539-01346 18-10
DECAL- “930B” BLACK 539-01242 18-10
DECAL- “937B” BLACK 539-01243 18-10
DECAL- BARKO LOGO 12.5”X12.7” 539-01268 18-10
DECAL- DANGER KEEP BACK DEBRIS 539-01255 18-10
CH-26 HVAC 26-1
GENERAL HVAC SYSTEM 26-3
AIR CONDITIONING (A/C) SYSTEM 26-3
HVAC SERVICE SCHEDULE 26-4
HVAC SERVICING 26-5
HEATER-A/C UNDER-SEAT UNIT 26-5
®
SUPERIOR • WI • USA • www.barko.com
CH-35 ATTACHMENT 35-1
ATTACHMENT- FELLING HEAD 35-2
GENERAL SAFETY 35-3
BASIC OPERATION & OPERATING TECHNIQUE 35-4
HYD HOOK-UP- ATTACHMENT TO WFB 35-5
CH-40 CAB 40-1
OPERATOR SEAT 40-2
SIDE CONSOLE 40-4
CAN SWITCH #1 40-5
CAN SWITCH #2 40-6
CAN SWITCH #3 40-7
IQAN MD4 DISPLAY SCREEN 40-8
ICONS & DISPLAYS ON START-UP SCREEN 40-9
LEFT JOYSTICK CONFIGURATION SCREEN 40-11
RIGHT JOYSTICK CONFIGURATION SCREEN 40-13
MAIN DISPLAY SCREEN 40-15
START UP SCREEN - 830B FB 40-19
HYDRAULIC SYSTEM DISPLAY SCREEN 40-21
ATTACHMENT CONTROL SCREEN 40-23
WARNING SCREEN 40-26
SERVICE DISPLAY SCREEN 40-27
HEAD FLOAT ADJUST DISPLAY 40-30
830B L-JS I/O DISPLAY 40-31
830B R-JS I/O DISPLAY 40-33
930B L-JS I/O DISPLAY 40-34
930B R-JS I/O DISPLAY 40-35
937B L-JS I/O DISPLAY 40-36
937B R-JS I/O DISPLAY 40-37
830B JS BUTTON CONFIG DISPLAY 40-38
930B JS BUTTON CONFIG DISPLAY 40-39
937B JS BUTTON CONFIG DISPLAY 40-40
930B/937B START UP DISPLAY 40-41
930B L-JS FUNCTIONS DISPLAY 40-44
930B R-JS FUNCTIONS DISPLAY 40-46
RADIO 40-47
DIESEL EXHAUST FLUID (DEF) LAMPS 40-48
EXHAUST SYSTEM CLEANING LAMPS 40-49
CH-47 FRONT & BACK FRAME 47-1
WFB FRONT & REAR FRAME OVERVIEW 47-3
VALVE- FRONT 558-02174 47-4
VALVE- STEERING 558-02175 47-5
®
SUPERIOR • WI • USA • www.barko.com
CH-60 POWER PACKAGE 60-1
WFB POWER PACKAGE OVERVIEW 60-3
CUMMINS TIER-4 DIESEL ENGINE 60-4
MAINTENANCE SCHEDULE 60-4
MAINTENANCE PROCEDURES 60-5
PUMP DRIVE- 2-PAD 535-07768 60-8
GENERAL INSTALLATION 60-8
INSTALLATION OF PUMP(S) TO DRIVE 60-9
LUBRICATION 60-10
PUMP CUT-AWAY ILLUSTRATION 60-11
WFB TRAVEL PUMP 560-02701 60-12
SERIES 90 HYDRAULIC PUMP DESCRIPTION 60-13
WFB COOLING FAN PUMP 560-02941 60-14
T6 VANE PUMP DESCRIPTION 60-14
T6 VANE PUMP DESCRIPTION 60-15
WFB IMPLEMENT PUMP 560-02943 60-16
WFB SAW PUMP 560-02944 60-16
SERIES 45 HYDRAULIC PUMP DESCRIPTION 60-17
CH-65 DRIVETRAIN 65-1
IWT & WFB DRIVETAIN OVERVIEW 65-2
TORQUE SPECS 65-3
1200 & 1400 SERIES PLANETARY AXLES 65-4
AXLE SPECIFACIONS 65-4
LUBRICATION 65-5
2-SPEED 360 GEARBOX / TRANSMISSION 65-6
GEAR OIL DRAIN & FILL 65-6
SERVICE SCHEDULE 65-7
IWT HYDRAULIC DRIVE MOTOR 65-9
GENERAL INSTRUCTIONS 65-9
PARTS ILLUSTRATIONS 65-10
HYDRAULIC PORT LOCATIONS 65-12
HYDRAULIC ADJUSTMENTS 65-13
HYDRAULIC BRAKE 65-14
INTRODUCTION 65-14
CROSS-SECTION VIEW 65-15
WHEELS & TIRES 65-17
INSPECTION & SERVICE 65-17
WHEEL LUG TORQUE 65-17
®
SUPERIOR • WI • USA • www.barko.com
CHAPTER
1 BANKS AVE • SUPERIOR • WI • USA • www.barko.com
®
OPERATOR
GENERAL INFORMATION
10
Table of Contents- CHAPTER 10
USE GENUINE BARKO PARTS 10-3
HYDRAULIC PRESSURE WARNING 10-4
INTRODUCTION 10-5
OTHER RESOURCES 10-6
UNAUTHORIZED PRODUCT CHANGES 10-6
KNOW YOUR BARKO 10-7
SAFETY SUMMARY 10-8
OPERATION ON SLOPED TERRAIN 10-12
WELDING SAFETY 10-13
FIRE PREVENTION 10-14
BARKO DEALER NET 10-16
PARTS TAB 10-16
MANUALS TAB 10-16
SERVICE TAB 10-17
ABBREVIATIONS 10-18
800-10009
THIS PAGE LEFT INTENTIONALLY BLANK
10-3
Remember, use only...
* GENUINE BARKO PARTS *
NOTE
This Operator’s Manual has limited parts information. A BARKO
Parts Manual will have detailed parts lists and illustrations that may
assist in performing routine maintenance.
A BARKO Service Manual will have detailed service and
maintenance procedures which will assist servicing your BARKO
machine or attachment.
This Operator’s Manual must be with the machine at all times.
Purchase BARKO Parts and/or Service Manuals
from your authorized BARKO dealer.
BARKO HYDRAULICS, LLC
1 Banks Avenue
Superior, WI 54880
715-395-6700
www.barko.com
OPERATOR’S
®
10-4
WARNING
!
Raising hydraulic pressure on this
machine above the factory approved
settings may cause death, severe
injury or property damage and will
void the warranty.
The consequences of increasing hydraulic
pressure are serious. The function of the relief
valves is to provide a fuse action to protect the
machine and the operator from overloading. When
overloaded, the machine can become stressed to a
level where parts fracture causing death, severe injury
or property damage. This is an extremely
dangerous practice.
Accordingly, you are advised that the pressure
settings of this machine are limited to the factory
approved settings. Pressures in excess of these
settings render each and all Barko warranties null and
void and constitute an obvious misuse and abuse of
our product.
BARKO HYDRAULICS, LLC
OPERATOR’S
®
Otros manuales para 830B
1
Tabla de contenidos
Otros manuales de Tractor de Barko
