2
Materials Included:
firepit kit
spark arrestor
gloves
instruction guide
landscape plan
*This kit contains extra pieces. You will have pieces
left over once you have completed the install.
Tools Required:
level
Note: If installing your stone oasis
square firepit on an unstructured base,
please be sure to follow these steps.
• Excavate area approx. 5” below
grade.
• Excavate approx. 6” larger than
your actual kit dimensions to ensure
a stable base
• Fill 4” with 3/4” limestone and
compact.
• Level out 1” of sand and install kit
as per the instruction guide.
If you are installing on an existing patio
and/or the base prep is not necessary,
then you can proceed to the first step
on the following page.
quarry stone spark arrestor
