Bargeheights LED 54AW Manual de usuario

bargeheights

User Manual

LED 54AW

LED 54AW User Manual rev. A

TABLEOFCONTENTS

1. The Beginning

Unpacking

Support

Introduction

DMX Quick Reference

2. Safety Information

3. Setup

DMX Cabling

DMX Termination

3-pin vs. 5-pin

Master/Slave Mode

4. Operation/Conguration

Menu Structure

DMX Control Mode

Standalone Control Modes

Master/Slave Mode

 TechnicalSpecications

Photometric Data

5. Care/Maintenance

Returns

Shipping Damage

1. THEBEGINNING

Thanks!

Thank you for choosing the Bargeheights LED 54AW! This ver-

satile PAR-style LED wash luminaire will provide reliable perfor-

mance day in and day out. To ensure long lasting performance,

please follow the guidelines in this manual. The instructions

here are important for your safety and the maintenance of this

xture.Enjoy!

Unpacking

All of our luminaires are thoroughly tested prior to being

shipped. While your LED 54AW functioned perfectly when it left

us, it may have been bumped around during shipping. Please

inspect the carton and if you notice any damage, take a good

lookatthexture.Ifyouseeanydamage,itisimportantto

contactoursupportteamrightaway.And,ifyoundanypieces

necessary for operation are missing – let us know! We’ll make it

right as soon as possible.

Support

If something is not working properly, let us know! Grab a com-

puter or your favorite handheld device and head to

www.bargeheights.com/support for user manuals, DMX

channel lists and support information. You can also email us at

[email protected]. We’re happy to help.

WARNING!

Toreducetheriskofreorelectricalshock,donotattemptto

usethisxturewithanycoversmissingorremoved.

The Bargeheights LED 54AW carries a one-year (365 day) man-

ufacturers’ limited warranty. Please contact Bargeheights for

warranty repair or returns. All returns require an SR (Service

Request)number.Ifyourxtureisstillunderwarranty,contact

us and we’ll walk you through the process.

Page 4 LED 54AW User Manual rev. A

Introduction

•PAR-styleLEDWashLuminaire

•Amber/Whitecolormixingvia54x1wLEDs

(18 Amber, 36 White)

•Highoutput,lowpowerconsumption

•Variableelectronicstrobe

•Variableelectronicdimmer

•Master/Slavemodes

•Built-instandalonemodes-nocontrollerrequired!

•Amber/Whitecolormixingabilityinstandalonemode

•Ruggedaluminumchassis

•Yokewithintegratedoormount

•Quietinternalfanforcooling

DMX Quick Reference

Channel Function

1 Overall Intensity/Strobe

2 Amber Intensity

3 White 1 Intensity

4 White 2 Intensity

2. SAFETYINFORMATION

•DONOTconnectthextureintoadimmer.Useconstantlinevoltageonlyto

avoid damage.

•Makesureyouareconnectingthexturetolinevoltagethatisnothigher

thanthevoltagestatedontherearofthexture.

•TheLED54AWisforindooruseonly.Donotexposethexturetorain,or

other moisture like your dishwasher.

•Donotoperatethexturewithammableitemsnearby.NEVERlayanything

onthexturewhileitison.

•Giveitspace!TheLED54AWneedsatleast6in(15cm)fromothersurfaces

andobjects.Makesurethatnoneoftheventilationorfanslotsareblocked.

•ALWAYSdisconnectthexturefromitspowersourcebeforeservicingor

cleaning.

•ALWAYSsecureyourLED54AWusingasafetycable.NEVERhangorcarryit

by its cord. It has a yoke for a reason!

•DONOToperatewhentheambienttemperaturesarehigherthan104°F

(40°C).Ifit’stoohotforyou,it’stoohotforyourLED54AW!

•IfyourLED54AWstopsworkingproperly,stopusingitimmediately.NEVER

trytorepairityourself.Attemptingrepairsintheeldcanresultindamageor

injury.Pleasecontactusforrepairsorreplacement.

•Makesurethepowercordisnotfrayedordamaged.

•Neverdisconnectthepowercordbypullingonthecord.Usetheplug!

•Avoiddirecteyeexposuretothelightsourcewhileitison.It’scoollooking,

and fun to watch, but staring into the light can damage your eyes!

Therearenouserserviceablepartsinsidethisxture.Donot

openthehousingorattemptanyrepairsyourself.Notonlyisit

a bad idea, it will void your warranty – which is a bummer when

you need a working light! If you do need service, please contact

Bargeheights.Damagessustainedasaresultofmodications

tothexture,ordisregardinginformationinthismanualwill

not be covered by your warranty. If something is wrong, let us

take a look at it. We’ll help you out!

!Caution!

Page 6 LED 54AW User Manual rev. A

3. SETUP

DMX Cabling

The LED 54AW has standard 3-pin XLR connectors for DMX con-

trol and daisy-chaining. Up to 32 devices can be daisy-chained

together on a single run. Standard microphone cables will

probably work OK, but DMX is a serial data transmission with

impedancespecicationsthataredifferentthananalogaudio.

CablesspecicallydesignedtotransmitDMXsignalswillalways

workbest.Asanexample,Belden©9841meetsthespecica-

tions for DMX-512 applications. The longer the cable distance,

the more important proper cable selection is.

DMX Termination

Sometimes, errors will crop up in your DMX line – especially if it

isalongrun.Whenthisisthecase,orifyoujustwanttomake

sure your DMX runs have the best chance at accurate transmis-

sion, you can use a terminator. A terminator is a 120 ohm ¼

watt resistor which is connected between pins 2 and 3 of a male

XLR connector (DATA + and DATA -). This connector is inserted

inthefemaleXLRconnectorofthelastxtureinyourdaisy

chain to terminate the line. Using a cable terminator will de-

crease the possibility of erratic behavior. Terminators are avail-

able on the internet and from lighting retailers. If you’re handy

with a soldering iron, they are simple to build yourself!

120 Ohm resistor

¼ watt

DMX Terminator

3-pin XLR Male connector

Shield

Data +

Data -

3-pin vs. 5-pin

Some manufacturers use 5-pin XLR connectors for DMX trans-

mission. Don’t worry! The two are still compatible. Adapters are

available on the internet and from lighting retailers. If you want

to build your own, here are the proper connections:

Cable Conductor 3-pin Female

(output)

5-pin Male

(input)

Shield (Ground) Pin 1 Pin 1

DMX Data + Pin 2 Pin 2

DMX Data - Pin 3 Pin 3

not connected - not connected

Master/Slave Mode

The LED 54AW also has a Master/Slave mode. In this mode you

cansettherstxtureinthelinetoactasthemastercontrol-

ler–andupto32otherxturescanbeconnectedandwillmir-

rortheoperationoftherst.Inthisconguration,youdonot

need a DMX controller.

Connectthexturesjustas

you would for DMX control.

See the OPERATION sec-

tion of this manual for more

information on how to set up

Master/Slave mode.

DMXIN DMX OUT

Master Fixture

Slave Fixture

to next xture

Page 8 LED 54AW User Manual rev. A

4. OPERATION/CONFIGURATION

We here at Bargeheights don’t really care for DIP switches.

They are hard to see in the dark, and since most of us don’t

quickly think in binary, they are tricky to set properly. The

LED 54AW has an LED display with a simple menu system.

There are four control buttons below the display that allow you

to navigate the control menus.

<MENU> – Go up a level in the menu system

<ENTER> – Select the current number / menu selection

<UP>–Scrolltothenexthighernumberormenuselection

<DOWN>–Scrolltothenextlowernumberormenuselection

To access the main menu press the <MENU> button. Use the

<UP> or <DOWN> buttons to navigate through the menu

options. Press the <ENTER> button to select the option dis-

played, and use the <UP> or <DOWN> buttons to change

the settings. Once your changes are made press <ENTER> to

accept the change.

If the LED 54AW menu remains static for more than eight sec-

ondsitwillautomaticallyreturntoitslastsetting.Toexitthe

menu without making any changes press the <MENU> button.

8888

Menu Enter Up Down

Menu Structure

Addr

AL--

3L--

3l--

FLAS

FAdE

ASC-

SOUA

SOUF

A001-A512

AL00-AL12

3L00-3L12

3l00-3l12

FL00-FL12

FA00-FA12

AS00-AS12

DMX Address Setting

Amber Dimmer

White 1 Dimmer

White 2 Dimmer

StrobeSlow->Fast

ColorFadeSlow->Fast

ColorCycleSlow->Fast

Sound Control Mode:

Color Cycle

Sound Control Mode:

Strobe

Page 10 LED 54AW User Manual rev. A

DMX Control Mode

To change the DMX starting address:

•Press<MENU> until Addr is displayed.

•Press<ENTER> to display the channel number, and press

<UP> or <DOWN> to select your starting address.

(A001-A512)

•Press<ENTER> to assign your selection.

DMX Mode Channel List

Channel Channel Value Function

0-127

128-249

250-255

Overall Intensity

StrobeSlow->Fast

FullIntensity

2 0-255 Amber Intensity

3 0-255 White 1 Intensity

4 0-255 White 2 Intensity

Otros manuales para LED 54AW

Tabla de contenidos

Manuales populares de Foco de otras marcas

VIZULO

VIZULO Micro Martin Guía del usuario

EuroLite

EuroLite LED IP FL-100 SMD Manual de usuario

Cooper Wheelock

Cooper Wheelock XB12 Manual de usuario

Allen + Roth

Allen + Roth 17624-000 Manual de usuario

ADJ

ADJ 4 STAGE PAK Manual de usuario

Cooper Lighting

Cooper Lighting EGL91SW233 Manual de usuario

Max

Max 37496 Manual de usuario

BEGA

BEGA 85 143 Manual de usuario

Beamz

Beamz 151.226 Manual de usuario

EuroLite

EuroLite LED IP FL-8 Manual de usuario

Ledj

Ledj PERFORMER 36 RGB Manual de usuario

Perel

Perel ELS3 Manual de usuario

Perel

Perel ELS3WD Manual de usuario

LumX

LumX LM 36130 Manual de usuario

Xtricity

Xtricity 4-80053 Manual de usuario

Stahl

Stahl 6521/4 Series Manual de usuario

Ecosense

Ecosense EcoSpec Manual de usuario

Ayrton

Ayrton minipanel FX Manual de usuario