barfield 1811D Series Manual del operador
1811D (SERIES) PITOT-STATIC TEST SET
USER INSTRUCTION MANUAL
M/N: 1811D, P/N: 101-00164-SERIES
Doc. P/N: 56-101-00164
Revision F
April 19, 2013
____________________________________
BARFIELD, INC.
Corporate Headquarters
4101 Northwest 29thStreet
Miami, Florida 33142
www.barfieldinc.com
Email: [email protected]
Barfield Inc. Confidential and Proprietary Information.
This document and all the information contained herein is the sole property of Barfield Inc.
No intellectual property rights are granted by the delivery of this document or the disclosure of its content.
This entire document is proprietary information and shall not be reproduced or disclosed to a third party without
the express written consent of Barfield Inc.
This document and its content shall not be used for any purpose other than that for which it is supplied.
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F Contact
Apr / 19 / 13 Page iii
CONTACT INFORMATION
Users are requested to notify the manufacturer of any discrepancy, omission, or error found in
this manual. Inquiries should include specific questions and reference the publication title,
number, chapter, page, figure, paragraph, and effective date.
Please send comments to:
TECHNICAL CUSTOMER SUPPORT - GSTE
BARFIELD, INC.
P.O. BOX 025367
MIAMI, FL 33102-5367
USA
Telephone (305) 894-5400
(800) 321-1039
Fax (305) 894-5401
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F Attention
Apr / 19 / 13 Page iv
ATTENTION
Although every effort has been made to provide the end user of this equipment with the most
current and accurate information, it may be necessary to revise this manual in the future. Please
be sure to complete and return the enclosed OWNER WARRANTY REGISTRATION CARD to
Barfield in order to validate the warranty and to ensure that you will receive updated information
when published. You MUST have your name and address on file at Barfield as a registered
user of this equipment, to be able to obtain the service covered by the warranty.
Visit the company website, http://barfieldinc.com/, for publication updates.
Please send the Registration Card to:
Barfield, Inc.
P.O. Box 025367
Miami, FL 33102-5367
USA
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F Info
Apr / 19 / 13 Page v
1811 SERIES
PITOT-STATIC TEST SET
INFORMATIONAL LETTER
The Barfield 1811 series Pitot-Static Testers are not advertised for use to comply with
FAR 91.411. The Test Sets do fully meet the requirements of DOT Advisory Circular 43-203B
for performing Altimeter and Static System Tests and Inspections. However, the personnel
requirements and some of the technical aspects of actual testing put a sizeable burden on the
person or persons performing the test.
Barfield advertises its 1811 series Test Sets as general-purpose trouble-shooting testers. With
respect to compliance with FAR 91.411, we feel that the customer should first be aware of all
requirements for performing test tests in the field. With this in mind, Barfield stands ready to
offer advice and assistance to its customers for accomplishing the required tests.
In conclusion, the Barfield 1811 Series Pitot-Static Testers meet the requirements for
compliance with FAR 91.411, but it is important that the customer be sure that the use of the
test set will be in compliance with the regulations.
Please note that a Barfield Altimeter and Static Test Procedure (Document number 60-101-
00150) is available to use in compliance with FAR 91.411.
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F Rev
Apr / 19 / 13 Page vi
REVISION RECORD
REV.
ECO #
REV. DATE
DESCRIPTION OF CHANGE
A N/A Mar/11/2003 Initial Release. This Instruction Manual replaces
TM1811D/E, dated 10/1/82.
B 260-00729 Jul/02/2008 Updated Company logo. Sections and page
numbering were reorganized.
C 260-00746 Dec/16/2008 A numeric code was added at the end of the
former P/Ns, to identify the instruments
configuration supplied with a particular unit.
D 260-00779 Apr/29/2010 Additional information was included in the
Certification paragraph (page 3)
E 260-00828 Mar/25/11 Updated warranty; Table 5: Required Inspection
updated; shipping and storage information
F 260-00968 Apr / 19 / 13 Amended Static Preset information; updated
gauge information regarding inspection
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F Maint.
Apr / 19 / 13 Page vii
MAINTENANCE AND REPAIR INFORMATION
The manufacturer of this equipment does not recommend the user to attempt any maintenance
or repair. In case of malfunction, contact the manufacturer, to obtain the list of approved repair
facilities worldwide, ensuring that this equipment will be serviced using proper procedures and
certified instruments.
BARFIELD PRODUCT SUPPORT
DIVISION
Shipping Address:
Telephone (305) 894-5400
(800) 321-1039
Fax (305) 894-5401
Barfield, Inc.
4101 NW 29th Street
Miami, Florida 33142
USA
Mailing Address:
Barfield, Inc.
P.O. Box 025367
Miami, FL 33102-5367
USA
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F Blank
Apr / 19 / 13 Page viii
THIS PAGE INTENTIONALLY LEFT BLANK
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F TOC
Apr / 19 / 13 Page ix
TABLE OF CONTENTS
Contact Information
Attention Page
Informational Letter Page
Revision Record Page
Maintenance Information
Table of Contents
List of Figures and Tables
SECTION PAGE
INTRODUCTION
1. PUBLICATION BREAKDOWN................................................................................... 1
2. INFORMATION PROVIDED WITH THE UNIT........................................................... 1
3. RECERTIFICATION................................................................................................... 2
1. DESCRIPTION
1. GENERAL DESCRIPTION......................................................................................... 5
2. PHYSICAL DESCRIPTION........................................................................................ 6
2. SPECIFICATIONS
1 PHYSICAL DATA....................................................................................................... 9
2. INPUT POWER.......................................................................................................... 9
3. OPERATION
1. THEORY OF OPERATION ....................................................................................... 11
2. 1811D OPERATIONAL SCHEMATIC DIAGRAM ..................................................... 11
3. 1811D PLUMBING SCHEMATIC DIAGRAM ............................................................ 12
4. PRELIMINARY.......................................................................................................... 12
5. PRETESTS ............................................................................................................... 13
6. PITOT SYSTEM TEST.............................................................................................. 15
1811D INSTRUCTION MANUAL
56-101-00164 Rev. F TOC
Apr / 19 / 13 Page x
TABLE OF CONTENTS (Continued)
SECTION PAGE
3. OPERATION (continued)
7. STATIC SYSTEM TEST............................................................................................ 16
8. STATIC LEAK TEST ................................................................................................. 16
9. COMBINED PITOT / STATIC TEST.......................................................................... 19
10. MACHMETER TEST ................................................................................................. 22
11. ENGINE PRESSURE RATIO TEST.......................................................................... 23
12. MANIFOLD PRESSURE GAUGE TEST................................................................... 23
13. LOW PRESSURE TEST........................................................................................... 24
14. VACUUM TEST......................................................................................................... 26
4. VALVE LEAK TEST
1. METERING VALVE ADJUSTMENT PROCEDURE.................................................. 27
2. RESETTING NEEDLE VALVE POSITIVE STOP...................................................... 29
5. INSPECTION RECOMMENDATIONS............................................................................ 31
6. SHIPPING....................................................................................................................... 33
7. STORAGE....................................................................................................................... 34
APPENDIX (ENGINEERING SPECIFICATIONS)......................................................................... 35
1. ALTIMETER ............................................................................................................... A
2. AIRSPEED INDICATOR............................................................................................. B
3. VERTICAL SPEED INDICATOR................................................................................C
Tabla de contenidos
Otros manuales de Equipo de prueba de barfield
barfield
barfield TT-1000A Manual del operador
barfield
barfield DPS1000 Manual del operador
barfield
barfield TT-1000A Manual del operador
barfield
barfield 1811GA Series Manual del operador
barfield
barfield DPS1000 Manual del operador
barfield
barfield 2311FA Manual del operador
barfield
barfield 2548H Manual del propietario
barfield
barfield DPS400 Manual de usuario
barfield
barfield 1811NG Manual del operador
barfield
barfield 2548H Manual del operador
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
