Barfield SC 063 Manual del operador

SC063

Sight Compass

USER INSTRUCTION MANUAL

M/N: SC063, P/N: 101-01200

Doc. P/N: 56-101-01200

Revision G

November 9, 2022

__________________________________________

SC063 is designed to be used as

Ground Support Test Equipment.

Not for aircraft installation.

56-101-01200 Revision G Page ii

Corporate Headquarters

4101 Northwest 29thStreet

Miami, Florida 33142

www.barfieldinc.com

Email: [email protected]

Barfield Inc. Confidential and Proprietary Information.

This document and all the information contained herein is the sole property of Barfield Inc.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content.

This entire document is proprietary information and shall not be reproduced or disclosed to a third party

without the express written consent of Barfield Inc.

This document and its content shall not be used for any purpose other than that for which it is supplied.

56-101-01200 Revision G Page iii

CONTACT INFORMATION

Users are requested to notify the manufacturer of any discrepancy, omission, or error found in this

manual. Inquiries should include specific questions and reference the publication title, number, chapter,

page, figure, paragraph, and effective date.

Please send comments to:

TECHNICAL CUSTOMER SUPPORT - GSTE

BARFIELD, INC.

P.O. BOX 025367

MIAMI, FL 33102-5367

USA

Telephone (305) 894-5400

(800) 321-1039

Fax (305) 894-5401

Email gsesales@barfieldinc.com

56-101-01200 Revision G Page iv

MAINTENANCE AND REPAIR INFORMATION

The manufacturer of this equipment does not recommend the user to attempt any maintenance or repair.

In case of malfunction, contact the manufacturer to obtain the list of approved repair facilities worldwide,

ensuring that this equipment will be serviced using proper procedures and certified instruments.

BARFIELD PRODUCT SUPPORT DIVISION

Telephone (305) 894-5400

(800) 321-1039

Fax (305) 894-5401

Email gsesales@barfieldinc.com

Shipping Address:

Barfield, Inc.

4101 NW 29th Street

Miami, Florida 33142

USA

Mailing Address:

Barfield, Inc.

P.O. Box 025367

Miami, FL 33102-5367

USA

56-101-01200 Revision G Page v

REVISION RECORD

REV.

ECO #

REV. DATE

DESCRIPTION OF CHANGE

N/A

January 1983

Initial Release.

260-00680

October 5, 2006

Page number sequence was changed.

260-00702

July 16, 2007

List of Approved Repair Facilities was

updated. Description Section was modified

to reflect current accessories package

(short handle is no longer provided)

260-00782

September 9, 2010

Non-applicable sections were removed.

Disclaimer and Recertification paragraphs

were added.

260-01057

November 7, 2014

Barfield logo updated.

260-01269

June 26, 2020

Updated formatting; Minor grammar

revisions; Addition to Title Page and TOC –

List of Tables; Addition of Publication

Background and Specifications; corrected

color identified in Chapter 1, 1(E) from red

to orange.

260-01391

November 9, 2022

Revision of Introduction and Chapter 1.

Addition of Figures 5 & 6, Table 1, and

Chapter 2: Installation.

 
56-101-01200 Revision G Page vi 
TABLE OF CONTENTS 
 
Contact Information 
Maintenance and Repair Information 
Revision Record 
Table of Contents 
List of Figures 
List of Tables 
 PAGE 
 
INTRODUCTION................................................................................................................................... 1 
1. PUBLICATION BREAKDOWN....................................................................................................1 
2. INFORMATION PROVIDED WITH THE UNIT ............................................................................ 1 
3. RECERTIFICATION.................................................................................................................... 2 
4. DISCLAIMER.............................................................................................................................. 3 
CHAPTER 1: GENERAL....................................................................................................................... 5 
1. INTENDED USE ......................................................................................................................... 5 
2. SPECIFICATIONS...................................................................................................................... 6 
3. BACKGROUND INFORMATION................................................................................................. 6 
CHAPTER 2: INSTALLATION.............................................................................................................. 8 
1. ASSEMBLY................................................................................................................................. 8 
CHAPTER 3: OPERATION................................................................................................................... 9 
1. ESTABLISHING A PERMANENT REFERENCE POINT............................................................. 9 
2. TESTING SIGHT SUITABILITY .................................................................................................. 9 
3. VERIFYING EXISTING SWINGING BASE................................................................................ 10 
4. DETERMINING MAGNETIC HEADING OF AN AIRCRAFT...................................................... 10 
5. PRECOMPENSATION AND PRESWING INSTRUCTIONS...................................................... 10 
6. COMPASS COMPENSATION PROCEDURE........................................................................... 11 
7. COMPASS SWINGING PROCEDURE ..................................................................................... 12 
CHAPTER 4: CARE PROCEDURES .................................................................................................. 14 
1. HANDLING ............................................................................................................................... 14 
2. STORAGE ................................................................................................................................ 14 
CHAPTER 5: RECEIVING & SHIPPING ............................................................................................. 15 
1. RECEIVING.............................................................................................................................. 15 
2. SHIPPING................................................................................................................................. 15 
 
 

56-101-01200 Revision G Page vii

LIST OF FIGURES

PAGE

Figure 1 Identification Label.................................................................................................................1

Figure 2 Owner Warranty Registration Card ........................................................................................2

Figure 3 Limited One Year Warranty....................................................................................................4

Figure 4 Sight Compass....................................................................................................................... 5

Figure 5 Container / Shipping Case, P/N 194-00078............................................................................ 8

LIST OF TABLES

PAGE

Table 1 Physical Characteristics...........................................................................................................6

Table 2 Compass Worksheet ............................................................................................................. 13

Table 3 Example of Completed Compass Correction Worksheet ....................................................... 13

56-101-01200 Revision F Page 1

INTRODUCTION

1. PUBLICATION BREAKDOWN

This user instruction manual establishes the standards of operation for the Sight Compass, M/N

SC063, P/N 101-01200.

Its purpose is to provide sufficient information for the personnel unfamiliar with this unit to operate it

in accordance with proper procedures, operating techniques, precautions, and limitations.

Note: The manufacturer has designed this equipment to be safe when operated using the

procedures and instructions detailed in this manual. Do not use this equipment for any

other purpose than that stated, as the protection provided by the equipment may be

impaired.

2. INFORMATION PROVIDED WITH THE UNIT

In addition to this User Instruction Manual, the Sight Compass is delivered with the items described

below.

A. The identification label (similar to Figure 1) attached to the instrument, provides the following

information:

Manufacturer Name

Designation of Equipment

Equipment Part Number

Equipment Model Number Equipment Serial Number

Figure 1 Identification Label

SIGHT COMPASS

101-01200

SC063

####

56-101-01200 Revision G Page 2

B. A laminated instruction sheet card, with a summary of the most frequently used operating

instructions indicated in this manual. This card is not intended to be a substitute of this manual;

it is provided as a quick reference card that can be conveniently carried to the location where

the procedures involving the aircraft will be performed.

C. The Owner’s Warranty Registration card (refer to Figure 2) is to be completed by the owner and

returned to Barfield, Inc. within ten (10) days of purchase to ensure automatic update of printed

matter and validation of warranty.

To register your unit, please visit https://www.barfieldinc.com/warranty_registration or scan the

QR code on the supplied Warranty Registration.

Figure 2 Owner Warranty Registration Card

D. Each new or re-certified unit is delivered with a Certificate (not pictured) that shows the date

when the unit was tested by the manufacturer, its serial number and when the next certification

is due. This certificate confirms that the unit performed according to its design specifications.

E. The Limited Warranty Statement (refer to Figure 3) lists the manufacturer’s obligation to the

original purchaser.

3. RECERTIFICATION

The Barfield Sight Compass, M/N SC063, P/N 101-01200, has a one-year recertification

requirement. Maintenance required by this unit must be performed by qualified technicians in a

shop equipped with the necessary tooling and facilities. Contact Barfield for Maintenance and

Calibration requirements.

56-101-01200 Revision G Page 3

4. DISCLAIMER

BARFIELD, INC., neither a vendor nor supplier of airworthy compasses or an airframe

manufacturer, has control over aircraft calibration and certification procedures. The information

provided in this Instruction Manual is presented as reference only, and therefore the compass

manufacturer calibration procedures and aircraft maintenance manual shall take precedence over

this Manual. However, the information presented is correct to the best of our knowledge at the time

of publication.

Otros manuales para SC 063

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Brújula de barfield

barfield

barfield SC 063 Manual del operador

Manuales populares de Brújula de otras marcas

Silva

Silva EXPLORER 203 Manual de usuario

Quechua

Quechua C Quechua 400 Manual de usuario

Brunton

Brunton 85R Manual

Brunton

Brunton 54lu Manual de usuario

Raymarine

Raymarine ST40 Manual de usuario

Advanced Navigation

Advanced Navigation GNSS Compass Manual de usuario

Brunton

Brunton 9020G Guía de configuración rápida

Furuno

Furuno SC-30 Manual de usuario

PNI

PNI V500 Manual de usuario

Suunto

Suunto KB-14/360 Manual de usuario

Conrad

Conrad 67 13 02 Manual de usuario

Brunton

Brunton NOMAD V2 PRO Manual de usuario

Bushnell

Bushnell Digital Navigation 70-0002 Manual de usuario

Dakota Digital

Dakota Digital Odyssey ODY-17-1 Manual de usuario

Brunton

Brunton 16B Braille Manual de usuario

Freestyle

Freestyle TOUCH COMPASS Manual de usuario

True North

True North Revolution Manual de usuario

TECHTRAIL

TECHTRAIL Trailhead Manual de usuario