Barco MFCD 3220 D Manual de instrucciones
Installation & User Manual
B410512 / 00
July 2004 MFCD 3220 D
Read the safety and
operating instructions before
operating the apparatus.
Retain safety and operating
instructions for future
reference.
Adhere to all warnings on
the apparatus and in the
operating instructions
manual.
Follow all instructions for
operation and use.
This apparatus conforms to:
CE, IEC 60950, UL 60950, CAN/
CSA C22.2 No. 60950 (cUL)
Power connection
Warning: This apparatus
must be earthed!
Power requirements: The
apparatus must be powered
using the 2 VDC power
supply that is supplied with
the apparatus.
The 2 VDC power supply
must be powered by the AC
mains voltage.
Do not overload wall outlets
and extension cords as this
may result in fire or electric
shock.
Mains lead protection:
Supply cords should be
routed so that they are not
likely to be walked upon or
pinched by items placed
upon or against them, paying
particular attention to cords
at plugs and receptacles.
SAFETY INSTRUCTIONS
Water and moisture
Never expose the
apparatus to rain or
moisture.
Never use the apparatus
near water - e.g. near a
bathtub, washbasin,
swimming pool, kitchen
sink, laundry tub or in a wet
basement.
Ventilation
Do not cover or block the
ventilation openings in the
cover of the set. When
installing the apparatus in a
cupboard or another closed
location, heed the
necessary space between
the set and the sides of the
cupboard.
Installation
Place the apparatus on a
flat, solid and stable surface
that can bear the weight of
at least 3 displays. If you
use an unstable cart or
stand, the set may fall,
causing serious injury to a
child or adult, and
seriousdamage to the
equipment.
MFCD 3220D User's Guide 4
MFCD 3220D User's Guide 5
CONTENTS
1. Overview ......................................................................................................... 7
1.1 Introduction .............................................................................................. 7
I-Gu rd ....................................................................................................... 7
1.2 P ck ge contents .................................................................................... 8
1.3 Controls nd connectors ......................................................................... 8
2. Inst ll tion .................................................................................................... 10
2.1 Prec utions ............................................................................................ 10
2.2. Before inst lling the displ y ................................................................. 10
2.3 Portr it or l ndsc pe position ............................................................... 11
2.4 Connecting the sign ls ......................................................................... 12
To connect the power: ............................................................................. 12
To connect the video & sync sign ls: ...................................................... 12
2.5.Routing the sign l c bles ...................................................................... 13
2.7 St rting up .............................................................................................. 14
2.6 Tilt nd swivel positioning ..................................................................... 14
3. Controls ........................................................................................................ 15
3.1 St nd-by switching ................................................................................. 15
3.2 Brightness control .................................................................................. 15
4. M inten nce ................................................................................................. 16
P nel ............................................................................................................ 16
C binet ......................................................................................................... 16
Removing dust from the re r of the gl ss p nel ........................................ 16
6. Technic l specific tions ............................................................................... 17
MFCD 3220D User's Guide 6
MFCD 3220D User's Guide 7
1. OVERVIEW
1.1 Introduction
The MFCD 3220D, BARCOs 21 3 meg pixel
color LCD displ y, gu r ntees perfect im ge
qu lity in medic l im ging pplic tions.
The displ y combines TFT (thin film tr nsistor)
liquid cryst l displ y p nel structure nd built-in
b cklight with inverter for better picture qu lity. It
is designed to meet the users' needs for
perform nce, consistency, nd outst nding im ge
qu lity through stre mlined development
process.
The displ y c n be used in portr it or l ndsc pe
version, simply by turning the p nel. The tilt &
swivel foot llows ide l positioning of the p nel, in
height nd viewing ngle.
The im ge brightness c n be djusted by me ns
of control wheel on the displ y. Other im ge
p r meters c n be djusted by me ns of extern l
softw re, like MediC l® Pro.
I-Guard I-GUARD® is B rcos p tent-pending, built-in
c libr tion device, continuously m int ining im ge
qu lity. With I-GUARD®, QA checks no longer
need to disturb norm l r diology ctivities, s they
c n be performed while pplic tions re running.
I-GUARD® llows r diologists or QA
dministr tors to c libr te their viewing st tions or
djust the p nels curve to DICOM st nd rds
without dministr tor intervention.
MediCal Pro In combin tion with B rcos MediC l ® Pro
m n gement nd c libr tion softw re p ck ge,
Coronis offers truly intervention-free displ y
system, m king it possible to perform QA checks
from one centr l server t ny time, thereby
reducing lifecycle cost.
Multi-scan capabilities The optimum nd recommended resolution is
2048 x 1536 or 1536 x 2048 at 60 Hz.
The MFCD 3220D displ y will lso displ y most
of the computer boot modes.
BARCO's B rcoMed 5MP2FH im ging bo rd is
the best choice to drive the MFCD 3220D displ y.
MFCD 3220D User's Guide 8
1.2 Package contents
The p ck ge should include the following items,
ple se check. If some of the items re missing,
ple se cont ct the reseller you h ve purch sed
the unit from.
- The MFCD 3220D displ y
- 12V DC power supply
- Europe n power cord
- Du l-link DVI video c ble
- This user m nu l
1.3 Controls and connectors
(4) (5) (6)
(1)
(2)
(3)
MFCD 3220D User's Guide 9
(1) Power LED
- The LED is off when the displ y is off.
- The LED is green when the displ y is on.
Note: This function c n be switched off by
softw re.
- The LED is blinking green when the
displ y is in Suspend power-s ving mode.
- The LED is or nge when the displ y is in
St nd-by power-s ving mode.
(2) Control wheel for st nd-by switching nd
lumin nce control
(3) USB-downstre m connector
(4) USB-upstre m connector
(5) DVI (video nd d t ) input
(6) 12V DC power input
MFCD 3220D User's Guide 10
Keep your origin l p ck ging. It is
designed for this displ y nd is the ide l
protection during tr nsport.
Avoid reflections in the fl t p nel to reduce
eye str in.
Pl ce the displ y on strong nd st ble
t ble or desk.
Keep the displ y w y from he t sources
nd provide enough ventil tion in c se it is
built in r ck or console.
M ke sure the computer is switched off
before connecting the sign ls.
Do not turn the power supply upside down
or t its side. Doing so would c use
overhe ting of the power supply.
Also do not block free ir circul tion round
the power supply.
2.2. Before installing the display
Important:
In the f ctory, the height-positioning system in
the displ y foot is blocked with clip to prevent
d m ge during tr nsport tion.
Before inst lling the displ y, you must remove
this clip.
To remove the clip:
1 Position the displ y with its re r side f cing
you.
2 If the foot cover is mounted on the foot, lift
up the 2 clips of the foot cover to rele se the
cover from the foot.
3 Pull the lower side of the cover tow rds you
nd simult neously slide the cover
downw rd.
2. INSTALLATION
2.1 Precautions
MFCD 3220D User's Guide 11
4 Pull the red clip out of the fix tion holes in
the foot.
You c n better le ve the cover off the foot while
connecting the sign l c bles to the displ y.
2.3 Portrait or landscape position
You c n ch nge the orient tion of the p nel t
ny time, but it is more convenient to select
l ndsc pe or portr it orient tion before
connecting the c bles.
To ch nge the p nel orient tion:
1 St nd t the front side of the p nel nd t ke
the p nel t both sides.
2Very important: Tilt the p nel before
ch nging the orient tion.
Should you ch nge the p nel orient tion
without tilting it first, you might irreversibly
d m ge the tilt & swivel mech nism.
3 To ch nge from portr it to l ndsc pe, turn
the p nel co nterclockwise while lifting it
up slightly.
To ch nge from l ndsc pe to portr it, turn
clockwise.
Tabla de contenidos
Otros manuales de Monitor de Barco
Barco
Barco SLite Series Manual de usuario
Barco
Barco System manual E1 Manual de instrucciones
Barco
Barco B-10 Manual de usuario
Barco
Barco OVL715 Manual del propietario
Barco
Barco Solaris LD 120-8 Suplemento
Barco
Barco CVM 2037 Manual de usuario
Barco
Barco Encore Controller SC Manual de usuario
Barco
Barco MFGD 5621 HD Manual de usuario
Barco
Barco PlantMaster Manual de usuario
Barco
Barco MVGD 1318 CR/ER Manual de instrucciones
Barco
Barco HDM 5049 PLUS Manual de usuario
Barco
Barco RDDS Manual de usuario
Barco
Barco Nio Color 5MP MDNC-6121 Manual de usuario
Barco
Barco Visona Manual de usuario
Barco
Barco Nio 5MP Manual de usuario
Barco
Barco Coronis 3MP LED MDCG-3221 Manual de usuario
Barco
Barco MDRC-2124 Manual de usuario
Barco
Barco SLite 10 XP Manual de usuario
Barco
Barco Coronis MDCC 2121 Manual de usuario
Barco
Barco Nio systems Manual de instrucciones
