B&B 3806 Manual de instrucciones
6,000 lbs Mega Roller
WWW.BBPIPETOOLS.COM
B&B Pipe & Industrial Tools
527 Michigan St,
South Houston, TX 77587
713-747-8502
PN 3806
Operator’s & Safety Manual
OSM - 6K Mega Roller 3806 R1
6,000 lbs Mega Roller
6,000 lbs Mega Roller Operang Manual
Model No. - 3806
Operaonal Height - 30-42 inches
(top of wheel @ center hole)
Weight Capacity - 6,000 lbs.
Footprint - 36x36 inches.
Max pipe diameter - 48 inches.
Unit weight 130 lbs.
Specicaons
Amce Rod
For height adjustment
under load
Set screw:
Reduces t up wobble
and enables ecient
transport
6X3 urethane over steel
wheels with bearings
ATTENTION
See instrucons for
proper set screw
operaon on next
page!
Carry Handle
Carry Handle
General Safety Instrucons
1. Do not misuse unit. Never aempt to operate the equipment at more than the recommended capacity.
Perform only the funcons for which the jacks are designed.
2. Keep alert. Never horse play around equipment and keep bystanders at a safe distance. Do not allow
children to be in the work areas or operate jacks.
3. Keep work area clean. For unobstructed movement around the stand, always keep oor in work area
clear of cluer.
4. Examine the equipment. Prior to using B&B products, inspect all parts to ensure that they are in proper
operang condion. Inspect legs for metal deformaon, bends or breaks.
5. Wear proper personal protecon equipment. Welding helmet or hard hat, welding gloves and safety
shoes should be worn as a precauon while operang this stand.
6. Operate only on hard level surfaces. Use the jack only on smooth and level surfaces to avoid pping and
the possibility of operator injury.
Instrucons for Use
Read and understand the instrucons for safe performance. Before working with a jacks and stands always
read operators manual. Understand the correct operaons, applicaons, and limitaons. Store this safety
manual in a clear area and always at a readily accessible site. Be especially aware of specic hazards. Extra
copies are available from B&B Pipe and Industrial Tools.
1. Check Mega Roller capacity rang and make sure it is not overloaded.
2. Check for damage before using. If damaged, remove from service and do not use.
3. Use on hard level surfaces. Be sure all feet of the Mega Roller are on the ground.
4. Only use Mega Roller for its intended purposes.
5. Always support the pipe with at least two jacks.
6. Place pipe onto Mega Roller slowly. Do not drop the pipe onto the Mega Roller.
7. To avoid pping. The Mega Roller should be properly aligned so that the pipe rests on both of
the rollers of each Mega Roller being used. Never allow anyone under the pipe while it is supported by
the Mega Roller.
8. Do not remove components or alter the Mega Roller in any way.
ATTENTION: SET SCREW FUNCTION. READ AND UNDERSTAND BEFORE USE.
DO NOT LEAVE IN TIGHTENED POSITION WHILE ADJUSTING HEIGHT OR THREADS WILL BE DAMAGED
1. Loosen set screw before any height adjustment is performed.
2. Tighten set screw aer the ulmate desired pipe height has been
achieved to reduce head wobble. (oponal)
3. Tighten before transport to enable two persons to carry
the jack.
Set Screw locaon, instrucons and funcon.
Tabla de contenidos
Otros manuales de Herramientas de B&B
