BALDR B0359STHR Manual de usuario
USER MANUAL MODEL:B0359STHR
(US VERSION)
DIGITAL RADIO CONTROLLED ALARM
CLOCK WITH MOON PHASE
Thank you for your purchase of Baldr digital radio controlled alarm
clock with moon phase.It has been designed and constructed using
innovative components and techniques to enable the perfect display.
Please read the instructions carefully to become familiar with the
properties and functions before you use the unit.If your BALDR product
does not operate properly after trying the troubleshooting steps, please
contact the seller on your order page or shoot an email to:
For the start-up of this device:
Main unit by Ac adaptor(included) and
1x CR2032 (included for memory function)
English
Pour démarrer cet appareil :
Unité principale par adaptateur secteur (fournis) et 1x CR2032
(fournis pour la fonction mémoire)
Français
1
OVERVIEW
1. Calendar display
Weekdays in 7 languages
2. Current time
12/24 hour format selectable
3. Snooze Icon
4. Alarm Icon
13. “ ▲” button
Increase the data
14. “ ▼” button
Decrease the data
15. “ ” button
Check alarm time, turn
on/off alarm, enter into
alarm setting
EN
2
11
18
20
19
1. Top button: Adjust the backlight or turn on / off
the snooze function;
2. “ SET ” button: Enter into time setting;
3. “ ▲ ” button: Increase the data;
4. “ ▼ ” button: Decrease the data;
5. “ ” button：Check alarm time,turn on/off alarm,
enter into alarm setting.
6. “ RCC ” button：Enter into RCC setting
7. “ MEM ” button: Check or clear Max/min record;
BUTTON DESCRIPTION
1
3
2
4
10
5
7
8
6
9
SET
RCC
MEM
12
13
14
15
16
17
EN
Notes:
16. “ RCC ” button
Enter into RCC setting
17. “ MEM ” button
Check or clear Max/min
record
18. Stand bracket
19. Hanging Hole
20. Battery Compartment
5. Low battery indication
6. Indoor Temperature and
humidity
7. Max/min record of Indoor
temperature and humidity
8. Temperature Trend
9. Humidity Trend
10. Moon phase
11. “ ” button
12. “ SET ” button
Pick out Positive
pole
The default year is 2020, if the weekday display is incorrect .
Please confirm year was set correctly. (for manual setting only)
The CR2032 cell battery is for memory function (included).
Please do not used as power supply. If you need to replace the
cell battery, please take out the part device as shown in the
figure below, load new battery matching the polarity(+and-).
1.
2.
3
EN
• Clear color LCD display
• WWVB atomic time
• Measures indoor humidity and temperature (℉/℃)
• Max/min record of temperature & humidity
• Indoor temperature range: 14℉~122℉( -10℃~50℃)
FEATURES
PACKAGE CONTENT
GETTING START
• Indoor humidity range: 1%-99%
• Calendar, alarm and snooze function
• Time display in 12/24H
• Calendar function with Month/Date or Date/Month display format
selectable
• White backlight with dimmer
BALDR recommends high quality alkaline or lithium batteries
for the best product performance. Heavy duty or rechargeable
batteries are not recommended.
Following contents are included in the package:
1 x Alarm Clock
1 x AC Adaptor
1 x CR2032 Cell Battery
1 x User Manual
4
WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF
SWALLOWED, IT COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2
HOURS.SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.
EN
INSTALLATION
Remove the cell battery’s Insulating strip ,then plug the adaptor to a
powered outlet.
SETUP
When power on or reset, LCD will full display for 3 seconds
with “BI” sound. Then display real Indoor temperature&
humidity, and default date & time with 100% backlight
brightness.then it will enter into WWVB signal receiving window.
WWVB Signal Receiving
5
1. After power on, it will start searching radio signal for 7 minutes with
the antenna symbol “ ” displaying on screen.
2. Once signal received, the main unit will display the received
time/month/date/weekday with symbol “ ” displaying on screen.
3. Daily RCC signal receiving: there are regular radio signal receiving
at UTC 7:00,8:00, 9:00, 10:00, 11:00 each day. It starts receiving
signal at UTC 7:00 everyday. For each day, once signal received at
any one receiving time, it will stop receiving signal that day.
4. Manual receiving: press and hold “ RCC ” button to enter RCC
signal receiving.
5. During receiving, press “ RCC ” button to exit RCC receiving.
Notes: During receiving , except for the top button and “ RCC ”
button, the other buttons don’t workable.
Default time: 12:00 Default date: 2020.06.15
EN
* RCC symbol display:
a. When receiving signal , RCC icon will be flashing by“1HZ”.
b. When signal successfully received, LCD will display
complete RCC icon and exit RCC receiving.
c. If no signal is received, the RCC icon will disappear.
Tip: please put the product close to the window to enhance
the reception of RCC signal.
Manual Settings
After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting require-
ments. Please check the following steps. Or if there is no signal
received, you can follow bellow steps for manual setting.
Press and hold “ SET ” button to enter into setting, press
“ SET ”button to skip setting steps or go to the next setting
option.
*Tips: press and hold “▲” or “ ▼” button will quickly
change the value by 8 steps.
Press “ SET ” to select Weekday Language. Default
setting :ENG. Press the “▲” or “▼” button to select languages:
GER/ENG/ITA/FRE/DUT/SPA/DAN optional .(German/En-
glish/Italian/French/Dutch/Spanish/Danish)
Press “ SET ” to select the RCC. Default setting : ON. Press
“▲” or “▼” button to select OFF or ON.
Press “ SET ” to select DST ON/OFF. Default setting : ON.
Press “▲” or “ ▼ ” button to select DST ON if you do observe
Daylight Saving Time.
1.
2.
3.
4.
5.
6
EN
* DST symbol display:
7
a. Select “DST ALWAYS” ,means DST function is always on all
the year round.
b. Select “DST ”,means DST function will be on during daylight
saving time.
c. Select “DST OFF”, means DST function is off.
Press “ SET ” to select Time Zone. Default setting : -5. Press “▲”
or “ ▼ ” button to select time zone: AST(-4),EST(-5),CST(-6),MST
(-7),PST(-8),AKT(-9),HAT(-10) optional.
6.
Time
Zone
AST
Atlantic Eastern Central Mountain Pacific Alaskan Hawaiian
EST CST MST PST AKT HAT
Press “ SET ” to select 12/24H Time Format. Default setting :12 H.
Press the “▲” or “▼” button to select 12H or 24H.
Press “ SET ” to select Hours. Press “▲” or “▼” button to adjust the
value.
Press “ SET ” to select Minutes. Press “▲” or “▼” button to adjust
the value.
7.
8.
9.
10.
11.
12.
13.
14.
Press “ SET ” to select Year. Press “▲” or “▼” button to adjust the
value.
Press “ SET ” to select Month&Date display format. Default setting :
M/D. Press the “▲” or “▼” button to select M/D or D/M format. (M:
Month ,D: Date)
Press “ SET ” to select the Month. Press “▲” or “▼” button to adjust
the value.
Press “ SET ” to select the Date. Press “▲” or “▼” button to adjust
the value.
Press “ SET ” to select the Temperature Unit. Default setting : ℉.
Press “▲” or “▼” button to select ℉/℃.
EN
Press and hold “ ” button to enter into alarm time setting.
Press “▲” or “ ▼ ” button to adjust data; press and hold “▲” or
“ ▼ ” button will quickly change the value by 8 steps.
The setting order is: Hour → Minute→ Exit.
During setting, touch top button to save and exit setting.
During setting, if no operation for 20 seconds, it will automati-
cally save and exit setting.
The alarm is default ON after setting the alarm time. Alarm
symbol will display on screen.
1.
2.
3.
4.
5.
6.
ALARM FUNCTION
Alarm Time Setting
When in time display mode, press “ ” button to check alarm
time. Press “ ” button twice to turn ON/OFF alarm by the
ON/OFF of symbol .
When in alarm time display mode, press “ ” button to turn
on/off the alarm by the ON/OFF of symbol .
1.
2.
Alarm ON/OFF Setting
SNOOZE FUNCTION
8
15.
16.
17.
18.
Press “ SET ” to select Beep ON/OFF .Default setting :ON. Press
the “▲” or “▼” button to select ON/OFF.
Press “ SET ” to confirm and exit.
During setting, touch top button to save and exit setting.
During setting, if no operation for 20 seconds, it will automatically
save and exit setting.
1. When the alarm is ringing, press any other button except top button
to stop the alarm. And the alarm will restart next day.
EN
OPERATION GUIDELINES
MAX AND MIN RECORD
Press “MEM” button to check maximum temperature and
humidity, the value will display for 5 seconds.
Press “MEM” button second time to check the minimum
temperature and humidity, the value will display for 5 seconds.
Press “MEM” button third time will return to standard mode.
Press and hold “MEM” button will clear the max and min record
and reactivate the memory.
During setting, if no operation for 5 seconds, it will automatical-
ly exit setting.
Normally, the Max and Min record will update every 24 hours at
0:00.
1.
2.
3.
4.
5.
6.
TEMPERATURE
After power on ,the indoor temperature will display automatically, it
will update reading each 30 seconds.
Temperature display range:14℉~ 122℉(-10℃~ 50.0℃); for
temperature lower than 14℉,the reading will be : “LL.L”; for
temperature higher than 122℉,the reading will be : “HH.H”.
1.
2.
9
Or when alarm is ringing, press the top button to activate snooze
function. The alarm will ring again in 5 minutes snooze interval.
And the “ ” symbol will be flashing on screen to indicate the
snooze mode. Press any other button except top button to exit the
snooze mode. And the alarm will restart next day.
When alarm rings, the ascending “Bibi” alarm sound will last for 2
minutes if no operation.
2.
3.
Arrow indication for temperature changes:
will display when temperature changes less than 1.8℉within
one hour or compared with last reading;
will display when the reading increase by 1.8℉within one
hour or compared with last reading.
will display when the reading decrease by 1.8℉within one
hour or compared with last reading.
After power on ,the indoor humidity will display automatically, it
will update reading each 30 seconds.
Humidity display range: 1%-99%;for humidity lower than
1%,the reading will be “1%”;for humidity higher than 99%,the
reading will be “99%”.
Accuracy: when the temperature is between 68℉~ 78.8℉
(20℃~26℃) and the humidity is between 40-80%,the accuracy
is ±5%,if out of this range the accuracy will be ±8%.
Arrow indication for humidity changes:
will display when humidity changes less than 5% RH within
one hour or compared with last reading.
will display when the reading increase by 5% RH within one
hour or compared with last reading.
will display when the reading decrease by 5% RH within
one hour or compared with last reading.
EN
Accuracy: For temperature between 32℉~122℉,the accuracy
is±1.8℉,if out of this range the accuracy will be±3.6℉; Temperature
resolution is 0.1℉(0.1℃).
Press “SET ” button to select the temperature unit ℉/℃(Refer to
Manual Settings point 14).
10
HUMIDITY
1.
2.
3.
4.
Humidity resolution:1% .5.
3.
4.
5.
Tip: 1.Place the product in a dry area free of dirt and dust. To help
ensure an accurate indoor temperature measurement, be sure to
place the Main unit away from heat sources or vents.
Otros manuales para B0359STHR
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Despertador de BALDR
