Badger Power Electronics Amstel 7.4kW Smart Guía
Amstel 7.4kW
Smart
Socket
User & Installation Manual
1. Safety Information....................................................................1
1.1. Important safety instructions.....................................1
1.2. Notes..............................................................................2
2. Specication...............................................................................3
2.1. Datasheet.....................................................................3
2.2. Features.........................................................................4
2.3. Dynamic Load Balancing.............................................4
3. Preparation for Installation....................................................5
3.1. Installation requirements............................................5
3.2. Electrical Wiring Diagram............................................6
3.2.1. 230V Single Phase.........................................6
3.3. Installation Considerations.........................................6
4. In the Box....................................................................................7
5. Installation Instructions..........................................................8
5.1. Step-by-Step Installation Instructions for:................8
5.1.1.BottomWiringConfiguration.....................8
5.1.2.TopEntryConguration.............................10
5.1.3.RearEntryConguration...........................12
5.2. Set the Operating Current .......................................14
5.3. Emergency Shutdown Button...................................14
5.4. Leakage Test...............................................................15
6. Operating Status......................................................................16
6.1. Power ON Checking...................................................16
6.2. LED Lights Instruction................................................16
6.3. Buzzer Prompt Description.......................................17
7. Maintenance Instructions.....................................................18
7.1. Product Servicing........................................................18
7.2. Warranty Description.................................................18
7.3. Safety Notice...............................................................18
7.4.RiskNotication..........................................................19
User Manual Contents......................................................1
1. Precautions...................................................................................21
2.Description....................................................................................21
2.1. Introduction....................................................................21
2.2. Performance...................................................................21
3. Installation Instructions............................................................22
3.1. Accessories.....................................................................22
3.2. DIN Rail Installation.......................................................22
3.3. Flush Mounted Installation...........................................23
3.4. Connection......................................................................24
4. Safety Instructions & Troubleshooting..................................25
4.1. Instructions.....................................................................25
4.2. Troubleshooting.............................................................25
DLB Box Manual......................................................................20
• Read this entire document before installing or using the EV Charger.
• Keep children away from operating the EV Charger.
• The EV Charger must be grounded through a permanent wiring
system or an equipment grounding conductor.
•Donotinstallthemountingbracketnearammable,explosive,harsh,
orcombustiblematerials,chemicals,orvapours.
•DonotexceedspeciedEVChargeroperatingparameters.
• Never spray water or any other liquid directly at the wall mounted EV
Charger. Never spray any liquid onto the charge handle or submerge
the charge handle in liquid. Store the charger connector above
thegroundtopreventunnecessaryexposuretocontaminationor
moisture.
•DonotuseEVChargerifitisdefective,appearscracked,frayed,
broken,orotherwisedamaged,orfailstooperate.
•Donotattempttodisassemble,repair,tamperwith,ormodifytheEV
Charger yourself. Any maintenance must be performed by authorised
technical personnel or our company’s technical support. Contact us for
anyrepairsormodication.
• Handle with care when transporting the EV Charger. Do not subject
ittostrongforce,impactorpull,twist,tangle,drag,orstepontheEV
Charger to prevent it or any components from damage.
• Do not touch the EV Charger’s end terminals with sharp metallic
objects,suchaswire,tools,orneedles.
• Do not insert foreign objects into any part of the EV Charger.
•UseoftheEVChargermayaectorimpairtheoperationofany
medicalorimplantableelectronicdevices,suchasanimplantable
cardiacpacemakeroranimplantablecardiovasculardebrillator.
Checkwithyourelectronicdevicemanufacturerconcerningtheeects
that charging may have on such electronic devices before using the EV
Charger.
This document contains important instructions and warnings that
must be followed for both installation and maintenance of the EV
Charger.
1.1. Important Safety Instructions
1. Safety Information
WARNING
1
• Do not use private power generators as a power source for
charging.
• Incorrect installation and testing of the EV Charger could
potentially damage either the vehicle’s battery and/or the
EVChargeritself.Anyresultingdamageisexcludedfrom
New Vehicle Limited Warranty and the EV Charger Limited
Warranty.
• Do not operate the EV Charger in temperatures outside its
operating range of -25°C to +55°C.
1.2. Notes
• Ensure that the EV Charger’s charging cable is positioned so it
willnotbesteppedon,drivenover,trippedon,orsubjectedto
damage or stress.
• Do not use cleaning solvents to clean any of the EV Charger’s
components.TheoutsideoftheEVCharger,thecharging cable
andtheconnectorendofthechargingcableshould be
periodically wiped with a clean dry cloth to remove
accumulation of dirt and dust.
• Be careful not to damage the circuit board when removing the
power entry knock-out.
CAUTIONS
2
2.1 Datasheet
2. Specication
3
2.2. Features
•Built-inwithover-voltageprotection,over-currentprotection,
overtemperatureprotection,groundfaultdetection,CP
abnormal signal protection and Type ARCD for Europe
standard.
• Operating temperature range: -25°C to 55°C.
•IP55protectingrate,operatinghumidityrange0-95%forindoor
and outdoor.
•Built-intemperaturesensorforfireprotection.
• Easy cable storage.
• The EV charger can be wall-mounted or pole-mounted. There
arethreewiringconfigurationsfortheEVcharger- bottom,top
and rear wiring.
• RFID card or auto-start charging modes.
• International CP mode or compatible modes.
•Ratedchargingcurrentcanbesetaccordingtodifferenthome
load conditions.
• Lightning protection ensures personal safety.
• Standard: EN IEC 61851-1 IEC 61851-21-2.
•Corrosionresistance:MeetGB/T10125-1997artificial
atmosphere corrosion test and salt spray test.
•Certificate:CE & UKCA.
2.3. Dynamic Load Balancing
Dynamic Load Balancing is integrated within BPE EV Chargers which
regulates its power output to harmonise with other household
loads to avoid current overloads. This is achieved by reducing the
current draw of the EV Charger so the system operates smoothly
below the house limit. This optimises home power usage without
tripping the breaker.
4
Installation of the EV Charger requires that you:
•Calculatetheexistingelectricalloadtodeterminethe
maximumoperatingcurrent.
• Calculate the distance to ensure minimal voltage drop.
• Obtain any necessary permits from the local authority that has
jurisdictionandconrmthatthefollow-upinspectionhasbeen
scheduled by an electrician after the installation is complete.
• Use only copper conductors.
• Use conductors that are sized in accordance with local wiring
regulations. The selected cable must be able to sustain periods
of constant load of up to 40A.
• Use protective devices. The circuit protection device chosen
must incorporate a suitable residual-current device (RCD)
and over-current protection in relation to the electrical load
selected.
Choose the Best Location for the EV Charger:
• Determine the parking location of the vehicle to ensure that
the charge cable reaches the charge port.
• Determine the parking location of the vehicle to ensure
that the current charge cable reaches the charge port in an
enclosedgarage,typicallyonthevehicle’schargeportside.
•Inawell-ventilatedarea.Avoidinstallationinanenclosedbox,
or adjacent to hot appliances.
• 1.2m above the ground.
•190mmfromanyobstacletoallowcablecollected.
Note:
The EV Charger is approved for outdoor use. Protection from rain
is recommended but not required.
3. Preparation for Installation
3.1. Installation Requirements
5
3.2. Electrical Wiring
3.2.1. 230V Single-Phase
TheL, N and PEshouldbewiredaccordingtolocalrequirements.
Thephaseusedmustmeasure230V(±10%).
• WARNING: Each ground must be connected to neutral
atonlyonepoint,ortheEVchargercannotoperate.
• WARNING:BeforeinstallingtheEVcharger,identifythe
type of utility service connection available on site. If you
are unsure about the type of connection available at
theservicepanel,consultanelectricianforassistance.
3.3. Installation Considerations
Three congurations are available to install the EV Charger:
The location of the conduit determines which installation method to
follow.Iftheconduitrunsalongtheoororlowtothewall,usethe
bottomentryconguration.Iftheconduitcomesfrominsidethe
wall,usetherearentryconguration.Iftheavailableconduitcomes
fromtheceiling,usethetopentryinstallation.
Note: Throughoutthemanual,“conduit”isusedasthestandard
term for the protective tubing that houses the service wiring. In
regionswhereconduitisnotused(Europeforexample),acable
comprised of service wiring enclosed in a protective jacket may be
substituted for conduit if allowed by local regulations.
Here are some additional guidelines:
• Conduit openings are sized for 32mm conduit.
• Conduitneedstobemetalandameretardant.
• Use an appropriate circuit breaker.
• Tokeepthehousingwaterproof,usecableglands.
6
Tabla de contenidos
