Babylo Panorama XT Manual de usuario
Supplied by Babylo International,
A3/ 3Fl, West Wing TST Center,
66 Mody Road,
TST East, Kowloon,
Hong Kong
IMPORTANT:
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
Supplied by Babylo International,
79/ 80 Furze Road,
Sandyford Business Estate,
Dublin 18.
Ireland.
Panorama XT
Travel System
Instruction Manual
111219
chassis
x1
F
AB C D
E G H
IJK L
M
front wheels
x2
rear wheels
x2
rear wheel axle
x1
bumper bar
x1
seat unit
x1
harness
x1
apron
x1
canopy
x1
seat liner
x1
raincover
x1
car seat
x1
car seat adaptors (set)
x1
31
Care
Parts List
2
Maintenance:
• The product requires regular maintenance to ensure correct and safe
• performance.
• Regularly inspect the wheels, locks, brakes, harness, catches, seat adjusters,
• joints and xings to ensure they are clean, operating correctly and in full
• working order.
• Replace tyres if they are excessively worn.
• Do not use this product if any part is broken, torn or missing and use only
• spares provided by the manufacturer.
• If parts become stiff or difficult to operate, ensure dirt is not the cause, then
• try a light application of a silicon lubricant, ensuring it penetrates between the
• components. Regular lubrication of moving parts will extend the life of your
• product and make opening and folding easier.
• Your pram should be serviced and reconditioned before using for a second
• baby, or within 18 months, whichever is sooner.
• After exposure to damp conditions, dry off with a soft cloth and leave fully
• open in a warm environment. Storing damp will encourage mildew to form.
• Store in a dry place.
• Do not leave in sunlight for prolonged periods as some fabrics may fade.
Cleaning:
• Spot or sponge clean fabrics with mild detergent. Use mild soap or upholstery
• shampoo. Wash separately. NEVER use bleach. Dry in shade thoroughly before
• reuse and avoid direct heat and sunlight. Do not iron. Do not dry clean.
• Wipe clean plastics and metals with damp cloth.
• Never clean any part of the product with abrasive, ammonia based, bleach
• based or spirit type cleaners.
• Ensure the product is fully dry before use or storage.
• Always ensure the product is stored in a dry place to prevent mold or
• mildew developing.
Unpack all contents and check that all parts are present before starting
assembly. Please refer to the parts list.
1a. Release the chassis (A) from the locked folded position. Press the grey safety
release button on the right frame release lever and pull both frame release
levers back.
1b. Lift the handle to open the chassis.
1c. When the chassis is completely open, you will hear a “click” indicating it
is locked into place.
1
2
3
A
30 3
Safety Chassis Assembly
WARNING! Use the most reclined position for new born babies.
WARNING! Do not add an additional mattress to the pram/pushchair.
WARNING! Do not place the product near an open re or other source of
strong heat.
• Adult assembly is required.
• Do not overload this product with additional children, goods or accessories.
• Bags and other items should not be hung from the handles as this can affect
• the stability of the product.
• Overloading, incorrect folding and the use of non-approved accessories is
• unsafe and may damage or break this product.
• Do not use parts or accessories which are not approved by the manufacturer.
• Always apply the parking brake when the product is stationary.
• Ensure the parking brake is engaged during the loading and unloading of
• children.
• Do not allow your child to climb unassisted into the product.
• Never leave the raincover, hood or apron on indoors, in a hot atmosphere or
• near a heat source as your child may overheat.
• Be careful when going up or down kerbs.
• Remove your child and fold the product when going up or down escalators.
• If this product is used by someone unfamiliar with it e.g. grandparents,
• always show them how it works.
• Do not use this product near an open re or exposed ame.
• Take extra care in windy conditions.
• Infant car seats should not be used in place of a cot or cot bed. Should your
• child need to sleep then it should be placed in a suitable pram body, cot or
• cot bed.
• To prevent damage, remove the raincover before folding the pushchair.
• Do not place anything on top of the raincover.
• To prevent your child overheating, always fold or remove the raincover when
• indoors or in warm environments.
• A basket is provided for the carriage of 2kg of items evenly distributed.
This product conforms to EN 1888-1:2018
2. Attach the rear wheel axle (D) to the rear of the chassis. Push down until
you see the silver locking pins lock into place and you hear a “click”.
D
3a. Push each rear wheel (C) into the sides of the rear wheel axle until you
hear a “click”. Give them a tug to ensure they are attached securely.
3b. To remove the rear wheels, simply press the grey button located on the
rear wheel axle and pull the wheel off.
C
Safety
4 29
Chassis Assembly
WARNING! Read these instructions carefully before assembly and use and
keep for future reference. The child may be hurt if you do not follow these
instructions.
This product is suitable for one child from birth (max. weight 15kg).
Suitable from birth in pram mode up to a maximum weight of 9kg or until
the child can sit up unaided, roll over or push itself up on its hands and
knees.
Follow suitability recommendations given in the separate infant car seat
instruction manual.
WARNING! Follow the manufacturer’s instructions.
WARNING! Never leave the child unattended.
WARNING! Ensure all locking devices are engaged before use.
WARNING! To avoid injury ensure that your child is kept away when
unfolding and folding this product.
WARNING! Do not let your child play with this product.
WARNING! Not suitable for children under 6 months in pushchair mode.
WARNING! ALWAYS USE THE HARNESS AS SOON AS YOUR CHILD CAN
SIT UNAIDED.
WARNING! Always use the crotch strap in combination with the waist belt
section of the harness.
WARNING! Check that the pram body or seat unit attachment devices are
correctly engaged before use.
WARNING! This product is not suitable for running or skating.
WARNING! Do not let other children play or hang on the product.
WARNING! Do not use this product if any part is broken, torn or missing.
IMPORTANT:
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
3. Push the handle downwards.
4. Lift the carry strap to close. The locking catch with engage automatically.
WARNING! To avoid injury ensure that your child is kept away when
unfolding and folding this product.
4a. Insert each of the front wheel (B) pins into the center of the socket until you
hear a “click”. Give each wheel a rm tug to ensure they’re securely attached.
4b. To remove the front wheels, simply press the grey button on the side of
the wheel socket and pull.
B
28 5
Chassis AssemblyFolding
1a. Remove the seat unit or the car seat to fold the chassis.
WARNING! Never attempt to fold the chassis with the seat unit or car seat
still attached.
1b. Locate and lift lever both sides of the seat connectors to remove the seat
unit from the chassis.
12
2. Press the grey button on the right release trigger and pull both release
triggers towards you.
1
1. Press the buttons either side of the seat unit (F) footrest and pull up
the footrest so it is in line with the rest of the frame.
Folding
6 27
Pram Mode
2. On the rear of the seat unit, fasten the Velcro® panels as illustrated.
WARNING! The fabric must cover the metal bracket.
F2
2a. Press the button located on the side of the car seat and pull upwards to
remove.
2
1
2
2b. Lift lever both sides of the adaptors to remove the adaptors from the
chassis.
1
3a. Attach the seat unit to the chassis. Line up the seat connectors with the
chassis housing and press downwards. Listen for a “click” to signal correct
assembly.
Pram Mode
26 7
Travel System
3b. Lift lever both sides of the seat connectors to remove the seat unit from
the chassis.
2
1
A car seat (L) and set of adaptors (M) are included to complete the travel
system.
1a. Remove the seat unit from the chassis to t the adaptors.
Line up the adaptors with the chassis housing and press downwards.
Listen for a “click” to signal correct assembly.
1b. Place the car seat (L) onto the adaptors. Push down to “click” into place.
Lift by handle to ensure car seat is secure.
Alternatively, attach the adaptors to the car seat rst and then attach the
car seat to the chassis.
WARNING! Never attach the car seat forward facing.
M
12
5. Insert the bumper bar (E) into the seat unit slots ensuring that the release
buttons are on the outside and you hear a “click”.
Give the bumper bar a tug to ensure it’s securely in place.
To remove the bumper bar, simply press the release buttons on either or
both sides and lift up.
4. Insert the seat liner (J) into the seat unit to add extra comfort for baby.
Travel System
8 25
Pram Mode
J
E
L
Locate the raincover (K). Pull the raincover down over the pram starting at the
top of the canopy and pulling down towards the footrest.
NOTE. The raincover will t in both pushchair and pram mode.
7a. Attach the canopy (I) to the seat unit.
First attach the plastic canopy clips to their respective sides, ensuring
that they sit over the small plastic guides located on each side of the seat unit
frame.
7b. Next, secure the canopy to the frame with the zip. Start with the right side
(when facing the seat).
6. Fasten the apron (H), secure the zip around the side and attach Velcro® over
the bumper bar.
Pram Mode
24 9
Raincover
H
1
2
I
K
Suitable from birth in pram mode up to a maximum weight of 9kg or until the
child can sit up unaided, roll over or push itself up on its hands and knees.
WARNING! Never use in pram mode with seat unit forward facing.
Seat Liner
10 23
Pram Mode
There is a seat liner (J) included for the seat unit.
To use the liner in pushchair mode, undo the harness and remove the chest
pads and crotch pad.
J
2. Thread the harness through the slots in the seat liner allocated for the waist,
shoulder and crotch straps.
WARNING! Ensure to thread the shoulder harness through the
corresponding slot height of the seat unit.
3. Re-attach the chest pads and the crotch pad. Repeat the process to remove
the seat liner.
Tabla de contenidos
Otros manuales de Paseante de Babylo
