BaByliss PRO FX59ZE Manual de usuario

FX59ZE

PROFESSIONAL CORDLESS TRIMMER

TONDEUSE DE FINITION PROFESSIONNELLE SANS FIL

LITHIUM POLYMER

PROFESSIONAL

CORDLESS TRIMMER

FX59ZE

This heavy-duty trimmer features

zero gap stainless steel T-blades,

great for detailing, designs and

all other ne work. Very easy-to-

handle, it is also perfect for fading

beards, sideburns and the nec-

kline. A powerful DC motor and

lithium polymer batteries deliver

high performance for clean, close

cutting.

OPERATING INSTRUCTIONS

• Before using the trimmer for

the rst time, charge conti-

nuously for 2 hours. Maximum

battery capacity will only be

reached after 3 charging and

discharging cycles.

• Make sure the switch on the trim-

mer is in the “0-OFF” position.

Connect the charging jack into

the receptacle on the buttom

of the trimmer. Plug the adapter

into any electrical outlet (at the

voltage listed on the label axed

to the adapter). The charging

indicator will light up to indicate

that the charging has begun.

Charging is complete after 1 hour.

User will see all 4 bars lit on the

trimmer handle when nished.

• The adapter may become warm

while charging. This is normal.

• Preserving the batteries: in order

to maintain the optimum capa-

city of the rechargeable batteries,

the trimmer should be recharged

for 2 hours approximately every 6

months.

• Turn the switch to “HI” for high-

speed function and “LO” for low-

speed function.

• Make sure the switch on the trim-

mer is in the “0-OFF” position

when the trimmer is not opera-

ting.

MAINTENANCE INSTRUCTIONS

VERY IMPORTANT: Blades must

be cleaned and oiled on a regular

basis for proper functioning. Fai-

lure to regularly clean and oil the

blades will void the warranty.

Maintenance of the blades

•

Remove hair trimmings and

debris from the blades using the

provided cleaning brush. Wipe

the housing clean with a dry cloth.

• Apply a few drops of lubricating

oil to the blades, and wipe oany

excess oil with a dry cloth. This

last procedure is important for

the proper maintenance of the

blades.

Always apply oil to the blades be-

fore and after use. This will ensure

maximum cutting performance.

Hold trimmer away from you in a

downward position and apply oil

on the front and sides of the cutter

ENGLISH

blade. Wipe excess oil owith a

soft, dry cloth.

Any other servicing should be per-

formed by an authorized service

representative, since the appliance

has no other user serviceable

parts. This product is for professio-

nal use.

Replacement (removal)

of blade set

To remove blade set from your

trimmer, make sure the trimmer is

in the “0-OFF” position. Remove

the blade set by placing thumb

against the smaller cutter and

pushing downward, releasing the

cutter from the trimmer housing.

Replace with new cutting system

and reverse the removal proce-

dure, only this time place your

thumb on the large cutter and

snap into place. Be careful not to

use too much oil and don’t oil your

trimmer more than necessary,

as this could damage the motor

(never attempt to oil the motor

bearing, as it is permanently lubri-

cated).

Blade care

Because the trimmer blades are

precision-made for a very spe-

cial use, they should always be

handled with care and cleaned re-

gularly to ensure maximum perfor-

mance. Each time you nish using

the trimmer, take the cleaning

brush provided and brush away

any loose hair that has collected in

the blades. Use a clean cloth to dry

the attachment, reattach and then

store the trimmer to protect the

blades until the next use.

DO NOT RINSE BLADE OR

TRIMMER HANDLE OR ADAPTER.

Be especially careful when chan-

ging or adjusting the blades. When

you have your trimmer serviced,

be sure both blades are sharpened

or replaced at the same time.

STORAGE: When not in use, your

appliance is easy to store. Allow

appliance to cool, then store in a

safe, dry location. Do not jerk or

strain cord at plug connections.

HOW TO USE COMB

ATTACHMENTS

• To use the comb attachments,

always turn the trimmer to the

“0-OFF” position.

• Slide the comb attachment onto

the front of the trimmer blade

and snap over the back of the

blade.

• To remove, push up the attach-

ment comb at the back of the

blade and remove comb.

ZERO GAP ADJUSTMENT TOOL

IMPORTANT! Only ever attempt

to zero gap the blades using the

adjustment tool, following the ins-

tructions very precisely.

The adjustment tool is required to

adjust the blades to zero gap, to

achieve a closer, more precise cut.

Regular

REGULAR

Zero Gap

ZERO GAP

Step 1.

Before placing the blade into the

adjustment tool, use the screwdri-

ver provided to loosen the tension

screws, without removing them

completely from the blade holder.

Step 2.

Place the blade into the adjust-

ment tool in the side labelled ‘Zero

Gap’.

Step 3.

Push the blade guide up as far as

the adjustment tool allows, so the

moving blade sits closely with the

top of the adjustment tool. The

blades will now be ush with each

other.

Step 4.

Using the screwdriver, tighten the

tension screws to hold the blade

in place.

Step 5.

Remove the blade from the ad-

justment tool by gently pushing

the blade from the opposite side.

REGULAR - Resetting the blade

for regular use

Step 1

Before placing the blade into the

adjustment tool, use the screwdri-

ver provided to loosen the tension

screws, without removing them

completely from the blade holder.

Place the blade into the adjust-

ment tool in the side marked

Regular.

The tool will automatically push

the moving blade down to its

regular position.

Step 2.

Tighten the tension screws to hold

the blade in place.

Step 3.

Remove the blade from the adjust-

ment tool by gently pushing the

blade from the opposite side.

CLEANING AND MAINTENANCE

To maintain correct performance,

the blades must be regularly clea-

ned and oiled. They are removable

for easy cleaning.

• With the trimmer facing you,

push the blade up and away from

the trimmer to remove.

• Brush away the hair from the

blades and the interior of the

cutting head with the cleaning

brush.

• It is recommended to oil the

blades every time that the

trimmer is used, using the oil

provided. Never use any other

product: this oil was formulated

for high speed trimmers, it does

not evaporate or slow down the

blades.

• After cleaning click the blade

frame back in place.

DISPOSAL OF LITHIUM

POLYMER BATTERY

The trimmer has lithium polymer

batteries. To protect the environ-

ment, these batteries should be

removed and properly disposed of

when the unit is no longer opera-

ting. To remove the battery block

for disposal or recovery, follow

these instructions:

1. Disconnect the trimmer from the

electrical outlet.

2. Discharge the battery pack com-

pletely before removing.

3. Remove the blade and 5 screws.

NOTE: one screw is located un-

der the rating label.

4. Open cover.

5. Remove the screw that fastens

the printed circuit board to hou-

sing. Lift printed circuit board

out.

6. Unplug lithium-polymer battery

block.

7. To protect the environment, do

not dispose of your battery with

your ordinary household waste.

For more details on recovery of

material and waste-treatment

facilities, please contact the

waste disposal services of your

region.

FEATURES

• Zero gap stainless steel T-blade

• Powerful DC motor

• Cordless operation

• Lithium-polymer batteries

• 4 comb guides 3mm – 6 mm –

10mm – 13mm

• Lightweight, silent, low heat

• Including cleaning brush and

lubricating oil

• Worldwide voltage

EU DECLARATION OF CONFORMITY

DECLARATION DE CONFORMITÉ UE

This declaration of conformity is issued under the sole responsibility of the manufacturer

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant

soussigné

Type of product / Type de produit : Trimmer / Tondeuse

Type number / Numéro de type : T152a

Trademark / Marque : BaByliss / BaByliss PRO / Conair / CPL

With following characteristics

Avec les caractéristiques suivantes : 100-240V~50-60Hz 12VDC 1A

Country of origin / Pays d’origine : Taiwan

The object of the declaration described above is in conformity with the relevant Union

harmonisation legislation:

L’objet de la déclaration décrit ci-dessus est conforme à la législation d’harmonisation de

l’Union applicable:

2014/35/EU Low Voltage Directive / Directive basse tension

2014/30/EU ElectroMagnetic Compatibility Directive / Directive

concernant la compatibilité élec-tromagnétique

2015/863/EC RoHS Directive / Directive RoHS

2009/125/EC Ecodesin Directives implemented by the Commission

Regulations (EC) No. 1275/2008 amended by (EU) No.

801/2013 and (EU) No. 278/2009 (where applicable) /

Directive relative à l’écoconception mise en œuvre par les

règlements de la Commission (CE) No. 1275/2008 modiée

par (UE) No. 801/2013 et (UE) No. 278/2009 (le cas échéant).

2006/42/EC Machinery Directive / Directive Machine

In accordance with the following standards:

En accord avec les normes suivantes:

LVD EN 60335-1 2012 A11: 2014; AC: 2014; A13: 2017

EN 60335-2-8 2015 A1: 2016

(inluding EMF /

y compris EMF) EN 62233 2008

Ecodesign EN 50563 2011 A1: 2013

EMC EN 55014-1 2017

EN 55014-2 2015

EN 61000-3-2 2014

EN 61000-3-3 2013

CE mark rst axed / Date de 1ère apposition du marquage CE: 04/2018

Signed by and on behalf of / Signé par et au nom de:

BABYLISS FACO S.P.R.L. (authorised by / autorisé par BABYLISS S.A.R.L.

and / et Conair Group Ltd)

Avenue de l’Indépendance 25

B-4020 Wandre, Belgium



FAC 2019/02

BabylissPRO®

Green Side Bât. 1B

400 avenue Roumanille – B.P. 20235

F – 06904 SOPHIA ANTIPOLIS cedex

FAC 2019/ 02

Tabla de contenidos

Otros manuales de Rasuradora eléctrica de BaByliss PRO

BaByliss PRO

BaByliss PRO FX3 Manual de usuario

BaByliss PRO

BaByliss PRO FX69E Manual de usuario

BaByliss PRO

BaByliss PRO FOILFX02 Manual de usuario

BaByliss PRO

BaByliss PRO FXFS2E Manual de usuario

BaByliss PRO

BaByliss PRO UVFOIL BLFS1A Manual de usuario

BaByliss PRO

BaByliss PRO FX775E Manual de usuario

BaByliss PRO

BaByliss PRO GOLDFX B787GDBR Manual de usuario

BaByliss PRO

BaByliss PRO FOILFX 02 BFS2A Manual de usuario

BaByliss PRO

BaByliss PRO FX765C Manual de usuario

BaByliss PRO

BaByliss PRO FOILFX 01 Manual de usuario

BaByliss PRO

BaByliss PRO FOILFX 02 BFS2GA Manual de usuario

BaByliss PRO

BaByliss PRO FX59E Manual de usuario

BaByliss PRO

BaByliss PRO UVFOIL BLFS2A Manual de usuario

BaByliss PRO

BaByliss PRO FX69ZE Manual de usuario

BaByliss PRO

BaByliss PRO PRO 4ARTISTS Manual de usuario

BaByliss PRO

BaByliss PRO BAB7880U Manual de usuario

BaByliss PRO

BaByliss PRO STELLATODIGITAL 4rtists Manual de usuario

BaByliss PRO

BaByliss PRO 4rtists Manual de usuario

BaByliss PRO

BaByliss PRO FOILFX 01 Manual de usuario

BaByliss PRO

BaByliss PRO BAB787U Manual de usuario

BaByliss PRO

BaByliss PRO 4rtists Manual de usuario

BaByliss PRO

BaByliss PRO FX7870IE Manual de usuario

BaByliss PRO

BaByliss PRO 4ARTISTS ROSEFX FX7880RGE Manual de usuario

BaByliss PRO

BaByliss PRO UVFOIL FXLFS1 Manual de usuario

Manuales populares de Rasuradora eléctrica de otras marcas

Philips

Philips MicroAction 4402LC Manual de usuario

Philips

Philips HQ7740 Manual de usuario

Philips

Philips Norelco BG2022 Bodygroom Manual de usuario

Norelco

Norelco Quadra 7610X Manual de usuario

Philips

Philips 7616X Manual de usuario

Philips

Philips HQ802 Manual de usuario

Philips

Philips HQ7363/17 Manual de usuario

Braun

Braun WaterFlex WF2s Manual de usuario

Philips

Philips NORELCO S7371 Manual de usuario

Daga

Daga MT-400 Manual

Philips

Philips RQ119x Manual de usuario

Remington

Remington BHT100 Manual de usuario

Philips

Philips Bodygroom BG2000 Manual de usuario

Kompernass

Kompernass KH 5537 Manual de usuario

Remington

Remington BHT6100 Manual de usuario

Philips

Philips qc5365 Manual de usuario

MIA

MIA Aqua Body Manual de usuario

Philips

Philips NORELCO AT880 Manual de usuario