Babybee DUO Manual de usuario
DUO Manual
IMPORTANT! Keep For Future Reference
20882013
babybeeprams.com.au
2
Before we start, there’s a few important things you
need to be aware of:
Return Policy
If you decide that the DUO is not
pramFree
Return Policy when returned in
original condition and packaging (with
no signs of usage). Please be mindful
of this when unboxing and setting up.
Refer to our website for full terms
and conditions.
Enjoy the ride, from all of us at
The safety of your family is our number one priority. Please take
the time to carefully read this manual and all warning notices on
22-24 before getting started. Incorrect assembly or use
can result in serious injury or even death.
WARNING
To prevent injury from choking, carefully remove and
immediately move out of reach all protective packaging, with the
exception of the outer cardboard packaging. Never leave your
children unattended with the pram or packaging.
Support
If at any stage you require assistance
with set up or use, please refer to
our 'After Sales Support' page on our
videos and FAQ’s. Or feel free to
email us anytime at:
hello@babybeeprams.com.au
Welcome aboard and
thanks for choosing
Babybee.
3
What’s in the box
Please check that you have all the correct parts
before getting started.
Stroller Seat
Belly bar
Handlebar bag
2x Rear wheels
Bassinet, mattress, liner
head barrier + cover
UV/Mosquito/Sleep cover
(may be located in seat footrest)
Seat liner
User Manual
2x Double adaptors
2x Rain covers
13 - Harness covers
011
5
2.3
6
7
4
Contents
3What’s in the box checklist
5Setting up your frame
7 Double or single mode?
Configurations
Rear brake
Front swivel wheels
4Rear wheels
4Adjusting the footrest
5Safety harness
6Canopy
6Adjusting the handlebar
Folding the Stroller
8Free accessories
Tips for maintaining your pram
20 Cleaning
21 Warranty
22 Safety warnings
9
4Seat recline
1213
8
Step 3: Setting up your bassinet
Step 4: Setting up your seat & canopy
Setting up your frame
To open the frame from
the folded position,
release the black frame
lock located on the side
of the frame.
Lift the handlebar
upwards. Place your foot
on the brake bar to
secure the frame while it
opens. Ensure you hear
the frame “click” into
place.
To attach the rear wheels
push the release buttons
located on the sides of
the brake bar and then
insert each wheel pin into
the sides of the brake bar
until you hear a “click”.
Give them a tug to
ensure they are attached
securely.
2
1Next, insert each front
wheel pin into the centre
of the socket ensuring you
hear them “click” in. Give
ensure they are secure.
Your frame should
now be set up.
4
6
5
click!
click!
click!
Double or Single mode?
There is an increased risk of the stroller tipping if used in double mode
with only one child in the seat. Please be mindful of this and hold the
stroller at all times if you are doing so.
When using the stroller in single
mode, no adaptors are necessary and
the bassinet or seat can be attached
directly into the central connectors.
(Note: if using a Maxi Cosi car capsule,
you will always need to first insert the
capsule adaptors).
When using the stroller in double
mode you will need to first attach two
sets of adaptors.
The first set attach into the central
connectors for the “top position”. To
remove them simply push the
buttons on the side and lift off.
The second set will slide onto the
guides at the front of the frame for
the “lower position”. To remove them
you will need to release the button at
the top of the connector before
sliding off.
1
2
87
It is safe to use your pram with any combination of Maxi Cosi Car Capsules
(selected models only), bassinets or seats facing any direction you like.
Configurations
The Babybee DUO was designed to be as versatile as possible to accommodate
the changing needs of your family.
The DUO offers over 18 configurations as both a single and double stroller:
2 Seats:
Both seats can fully recline
Top seat can recline only
2 Bassinets:
Car Capsule:
109
Seat can not recline in any configuration with capsule
Single mode:
Step 3 -
Setting up your bassinet
Using the fabric handles, pull the
black metal rods firmly into place.
This will give your bassinet its
structure.
Zip up the fabric and insert the
head barrier then the bassinet
mattress, firmly pressing around all
edges.
Starting from the right side when
standing at the foot end of the
bassinet, zip the foot cover onto the
opposite end to the canopy. Then
attach the press studs on the sides
of the foot cover onto the insides of
the canopy connectors to hold it in
the correct position.
To release the canopy, press the
round buttons on the side of the
canopy frame.
2
1
4
Attaching the bassinet to the frame:
Attach the bassinet onto either the central connectors of the frame for single
mode or the lower connectors for double mode. To release, lift the bassinet
release buttons upwards and lift the bassinet up. The bassinet can face either
direction, with parent facing being the preferable option for your child's
development.
Step 4 -
Setting up your seat & canopy
Line up the seat
connectors with the frame
and press downwards.
Listen for the ‘click’ and
ensure it is securely
locked in place.
To recline the seat, press
the large, round, buttons
on the sides of the seat
connectors and tilt the
seat forward or back.
To remove the seat press
the oval buttons on the
sides of the seat
connectors and lift up.
Note: The seat can be
faced in the forward or
rear facing position.
• This stroller seats two passengers with a maximum weight limit of 20kg each.
• Not suitable for a child under 6 months old who cannot sit up unaided.
•Do not allow your child to climb unassisted into the stroller.
Refer to page 15 for instructions
on adjusting your harness.
click!
1
2
• Please ensure that your child correctly wears the tted and adjusted safety
harness at all times with all 5 straps secured.
• Never leave the harness buckled when not tted to the child in the stroller.
The harness can form loops which may cause a strangulation hazard.
TIP:Your canopy visor may need a little TLC after shipping. To get it
looking nice and new again simply apply heat from a clothes steamer or
hair dryer to remove any wrinkles (just be careful not to scorch the fabric).
This is not covered under warranty.
4To secure the canopy, first
ensure that it is zipped onto the
seat.
Next attach the plastic
canopy connectors onto the
sides of the frame (TIP: attach
from top to bottom). You’ll notice
a round guide on each side, the
connectors should attach
over these guides.
Finally, insert the belly bar into
the belly bar sockets on the seat
frame. Always give the bar a firm
tug to ensure its secure.
Note: To remove from one side
or both, press the button on the
side you want to release, and
pull the belly bar out.
6
5
1211
3
click!
click!
Using your DUO
Correct use:
Any vehicle with moving parts needs to be used and treated with care and
given regular maintenance to remain safe and in good condition. Please be gentle,
9DUO looking and feeling newer
for longer!
Front swivel wheels:
When travelling fast along straight surfaces or across uneven terrain, the front
wheels may spin or cause what's commonly known as as “wheel shudder”.
Rear brake:
When stopping, use the brake at all times by pressing down on the bottom of
To lock the front swivel wheels into
place, press down on the wheel lock
buttons (located on the back of the
wheel sockets). To go back to 360°
swivel mode press the buttons up
again.
To remove the wheels you will need to
use a flat screw driver or similar tool to
carefully press in the silver button
located on the wheel hub. Please take
care whilst doing this.
Rear wheels:
To remove the rear wheels, press the
button located on the brake bar and
Basket:
The DUO basket has been tested
with more weight may cause the
basket to break.
Adjusting the footrest:
Lift the foot rest and it will click into
the highest position. To release, press
both footrest buttons simultaneously
and lower.
Reclining the seat:
Press the large, round buttons located
on the sides of the seat connectors and
recline the seat to the desired position.
1413
Using your DUO
Safety Harness:
Always engage the brake before placing your child in the stroller.
Always use the harness when your
child is in the stroller. Always adjust
the harness appropriately for your
child’s size.
Adjust the length of each strap
To release press the button
in the middle of the buckle.
Always give the harness a
tug to ensure it’s secure.
Depending on your child’s
height, thread the shoulder
strap through the appropriate
slot on the seat.
Ensure it is thread through
the corresponding slot of the
seat liner.
Adjust the strap length using
the buckle as required.
straps into the central buckle.
To secure the harness:
To adjust the height of the
harness straps:
Having trouble?
Visit our website for a video tutorial
on how to adjust the harness.
Canopy:
Adjust the canopy as needed to protect your child from the sun and wind. For
maximum protection, use the zip to extend the canopy to its maximum length.
Adjusting The Handlebar:
Push the button in the middle of the handlebar and pull or push to your
desired height. It may require a slight “jiggle” to adjust.
65
Never leave your little one directly exposed to the sun, always ensure the
canopy is adjusted correctly.
Adjusting The Bassinet Ventilation:
The bassinet has an inbuilt sun visor. Simply pull this out when needed. The
foot end of the bassinet fabric can also be unzipped to expose a mesh panel,
allowing additional air flow through the bassinet. Similarly the canopy
peekaboo flap can be opened for more air flow.
8
Folding the Stroller
Before folding, ensure that the front wheels are unlocked and the
handlebar is at the lowest height position.
Remove the second seat/bassinet by lifting the release levers on
either side (the stroller can be folded with one seat in the forward
facing position only).
Standing at the front of the stroller, push the black sliding buttons
located on the black circular handles and the seat will fold
backwards.
Ensure you use the black frame lock located on the side of the
frame to keep the frame locked in place.
Then you can lift the frame up using the circular handles.
• Always take great care when folding the frame.
•Ensure children are out of reach of the stroller.
• Do not carry bags from the handlebar other than the one provided by Babybee.
• Do not use parts or accessories that are not approved for use with the Babybee
ROVER range.
•Always supervise and monitor your child regularly whilst the pram is covered.
Rain Covers(compatible with seat
& bassinet)
The rain covers can be stored in the pockets at the
back of the basket. Simply place them over the seat
and bassinets as shown. The open flap should be at
the top, this is to access the bassinet handle.
Handlebar bag
Secure the straps to the handlebar by
threading the Velcro through the plastic
guide. Ensure it’s as tight as possible to
prevent it from falling down the frame. Be
careful carrying liquids in the handlebar bag.
Hot liquids may burn you or your child. The
maximum weight limit that the bag can hold is
2kg.
7
Free Accessories
UV / Mosquito / Sleep Cover
The cover is located in the zipped pocket under the foot rest.
Remove the cover, place it over the canopy and attach the elastic
to the back of the canopy connectors and then tuck under the
footrest.
Note: Compatible with seat only
Tabla de contenidos
Otros manuales de Paseante de Babybee
Babybee
Babybee DUO2 Manual de usuario
Babybee
Babybee ROVER Manual de usuario
Babybee
Babybee MILES Manual de usuario
Babybee
Babybee DUO2 Manual de usuario
Babybee
Babybee ROVER 3 Bassinet Manual de usuario
Babybee
Babybee ROVER Bassinet Manual de usuario
Babybee
Babybee MIO Manual de usuario
Babybee
Babybee DUO3 Manual de usuario
Babybee
Babybee LUNA Manual de usuario
Babybee
Babybee Comet plus Manual de usuario
