Baby Lock Embellisher EMB12 Manual técnico

"IMPORTANT SAFETY INSTRUCTIONS"

When using the needle felting machine, basic safety precautions should always be followed,

Including the following.

"Read all instructions before using".

DANGER -To reduce the risk of electric shock.

1. The needle felting machine should never be left unattended when plugged in.

Always unplug this needle felting machine from the electrical outlet immediately after

using and before cleaning.

2. Always unplug before replacing light bulb. Replace bulb with same type rated 15 watts/110

volts in 110V/120V area. (15 watts 230 volts in 220V/240V area).

WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons.

1. Do not allow to be used as a toy. Close attention is necessary when the felting machine is

used by or near children.

2. Use this needle felting machine only for its intended use as described in this manual.

Use only attachments recommended by the manufacturer as contained in this manual.

3. Never operate this felting machine if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Return the needle felt-

ing machine to the nearest authorized Baby Lock retailer for examination, repair, electrical

or mechanical adjustment.

4. Never operate the needle felting machine with any air openings blocked. Keep ventilation

openings of the needle felting machine and foot controller free from the accumulation of

lint, dust, and loose cloth.

5. Never drop or insert any object into any opening.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

8. To disconnect, turn the main switch to the symbol "O" position which represents off, then

remove plug from outlet.

9. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the felting

machine needles.

11. Always use the proper needle plate. The wrong needle plate can cause the needles to break.

12. Do not use bent needles.

13. Do not pull or push fabric while stitching. It may deflect the needles causing them to break.

14. Switch the needle felting machine to the symbol "O" position when making any adjustments

in the needle area, such as changing needles, changing needle plate, or changing cloth

presser, and the like.

15. Always unplug the needle felting machine from the electrical outlet when removing covers,

lubricating, or when making any of the servicing adjustments mentioned in the instruction

manual.

16. Keep fingers away from moving parts, especially the area near the needles.

17. Please note that on disposal, this product must be safely recycled in accor-

dance with relevant National legislation relating to electrical / electronic prod-

ucts. If in doubt please contact your retailer for guidance.

18. The appliance is not intended for use by young children or infirm persons

without supervision.

19. Young children should be supervised to ensure that they do not play with the

appliance.

"SAVE THESE INSTRUCTIONS"

"This needle felting machine is intended for household use."

European

Union only

Cloth presser height adjusting screw

Handwheel

Yarn & ribbon guide

Ribbon guide

Yarn port

Power switch

Yarn threader

Yarn stand Yarn stand pin Washer Wing nut

Socket for

foot controller

Sewing table

Yarn Stand components

Accessory

storage

Ribbon

slot

Needle

plate

Cloth

presser

Needle clamp

holder

Finger guard

Machine cover

Foot controller

Instruction book Art of Embellishing Book

Detail of accessories

(large:2mm) (small:1.5mm)

Allen screwdriver Screwdriver

Package of needle

(#365A017)

Lint brush Tweezers

1.Overview of Baby Lock Embellisher

2. Setting Up Your Baby Lock Embellisher

1. Plug in the machine: Plug the power cord

into the machine first, then into a wall out-

let. Always make sure the power is off and

remove the plug from the wall outlet when

the machine is not in use, or when making

any adjustments such as changing needles

or light bulb. Available foot control for

U.S.A.: Model EZ-168A.

2. Polarized Plug: This appliance has a polar-

ized plug (one blade wider than the other).

To reduce the risk of electric shock, this

plug is intended to fit in a polarized outlet

only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does

not fit, contact a qualified electrician to

install the proper outlet. Do not modify the

plug in any way.

3. Foot control: The felting speed of the

machine is determined by the amount of

pressure applied to the foot control. When

not in use, do not place anything on the

foot control or the machine could start inad-

vertently and the foot control or motor could

burn out.

4. Cloth Presser: The cloth presser is to

prevent cloth/fabric/material from flapping

during the felting process. Place the

cloth/fabric/materials on the needle plate

and under the cloth presser. Lower the

cloth presser lifter lever. To adjust the

height of the cloth presser, turn the cloth

presser height adjusting screw until you get

the correct height for your cloth/ fabric/

material. Turn the cloth presser height

adjusting screw counter-clockwise to raise

the cloth presser. Turn the cloth presser

height adjusting screw clockwise to lower

the cloth presser. The cloth/fabric/material

should move freely under the cloth presser

without any restrictions.

Cloth presser height adjusting screw

Turn left (counter-clockwise)

Cloth presser is raised Turn right (clockwise)

Cloth presser is lowered

Cloth presser

lifter lever

2. Setting Up Your Baby Lock Embellisher cont.

5. Set up yarn stand

a) From the top side of the yarn stand, insert

the threaded end of the yarn stand pin into

opening in yarn stand.

b) Place washer and wing nut on the threads

of yarn stand pin and tighten with fingers.

c) Insert the "L" shape side of yarn stand into

slotted opening located on the back of

the

machine body.

3. Remove and replace Finger Guard

Finger guard is a safety device to reduce

risk of injury.

If you would like to remove finger guard,

special care is required around the felting

needles.

To remove finger guard:

To replace finger guard:

a) Open the lamp cover.

b) Loosen the screw of finger guard by

turning it counterclockwise.

c) Remove finger guard.

d) Retighten the screw slightly by turning

it clockwise. This will prevent the

screw from vibrating out.

e) Close the lamp cover.

a) Open the lamp cover.

b) Loosen the screw for finger guard by

turning it counterclockwise.

c) Replace finger guard.

d) Tighten the screw by turning it clock-

wise.

e) Rotate handwheel several turns,

making sure needle clamp and needle

screws are not touching the finger

guard.

f) Close the lamp cover.

4. Start Embellishing

Let your creativity soar with your new Baby Lock Embellisher! Now you can make your

projects even more distinctive. Let your imagination run free with new ways to create beautiful

felted embellishment on your crafts, home decorating, quilting, sewing, and scrapbooking.

What kind of fabrics and trims can I use with the Embellisher?

Just about any fabric can be felted with the Embellisher. However, some fabrics tend to have

more favorable results after fabrics are laundered then used for embellishing. The recom-

mended fabrics and trims are those made from natural fibers such as linen, wool, wool roving,

and wool or cotton yarns. The best characteristic for fabrics is a napped or textured surface. A

napped surface will adhere to a natural fiber/napped surface/or mixed fiber base.

Avoid types of synthetics with "wash and wear" weaves and finishes which have a smooth

surface.

Can I launder my embellished projects?

To determine if your embellished project is washable, it is recommended that you do a test

sample first from the fabrics you intend to use. Wash the finished sample the same way you

will wash it after the project is completed.

For example, if you plan on washing and drying the completed project with a load of jeans,

then do the same with the test sample. Do not "pamper" the test sample unless you plan on

pampering the finished project.

NOTE: Laundering rules of "pre-washing":

Pre-washing all fabrics before sewing does not apply. With the Embellisher, you want the

finished project to "shrink" so the felted fibers will stay meshed. With this in mind, be sure to

make the project a little larger to allow for shrinkage.

Because of not pre-washing fabrics before embellishing, color fading can occur when working

with bright and contrasting colors. Be sure to make a test sample and wash it for best results.

4. Start Embellishing cont.

Layer the cloth/fabric/materials that will be felted

together to create the embellishment. Make sure

the smaller piece to be felted is on the correct side

of the project.

NOTE:Depending on the look you want to achieve

this can be either right or wrong side of project.

Place the layers to be felted together under the

cloth presser. Lower the cloth presser lifter lever.

If needed, adjust the height of the cloth presser at

this time so the project can move freely under the

cloth presser.

Move the cloth/fabric/materials in any direction so

that the needles can mesh the layers together.

ATTENTION: Always check to make sure the fab-

ric under cloth presser will move freely or does not

flap before embellishing. If necessary, adjust the

cloth presser height adjusting screw.

When you have finished embellishing, turn the

handwheel toward you making sure the needles

are completely out of the project. Never remove

the embellished project with the needles in the

project, as the needles can bend or break.

NOTE: Always make sure the cloth presser lifter

lever is lowered before starting to embellish. If the

cloth presser lifter lever is not lowered, the

materials can easily be lifted by the needles and

can cause needle breakage.

Remove the sewing table by sliding it to the left

and the machine will convert to a free arm. This

will allow you to embellish sleeves, pant legs, and

small areas.

This will also give you access to the free arm door

to clean out the lint that has accumulated from

embellishing.

5. Yarn Embellishing

Fig. 1 Fig. 2 Fig. 3

1. Rotate the yarn & ribbon guide toward the

back of the machine. Align the guide with

the top of the yarn stand pin.

2. Place yarn or thread on the yarn stand and

pull yarn end from center.

3. While sitting in front of the machine insert

yarn into the third hole of the yarn & ribbon

guide as shown in Fig. 1.

4. Wrap yarn to the underside of yarn & ribbon

guide and insert into the second hole as

shown in Fig. 2.

5. Once again, wrap yarn to the underside of

yarn & ribbon guide and insert into the first

hole as shown in Fig. 3.

NOTE: If the tension of yarn is too tight, use

only the third hole of yarn & ribbon guide. (Fig.

If this does not help the tension check that the

yarn diameter is not too large. See page 8 for

additional information.

Tabla de contenidos

Otros manuales de Máquina de coser de Baby Lock

Baby Lock

Baby Lock Quilter's Choice BLQC2 Manual técnico

Baby Lock

Baby Lock BL9 Guía de solución de problemas

Baby Lock

Baby Lock Regalia BLRG20 Manual de usuario

Baby Lock

Baby Lock Spirit BLPY Manual de usuario

Baby Lock

Baby Lock Elizabeth BL200A Manual técnico

Baby Lock

Baby Lock Quilter's Choice Professional BLQP Manual técnico

Baby Lock

Baby Lock GOLD Ellisimo II BLSOG2 Instrucciones de instalación y funcionamiento

Baby Lock

Baby Lock Tiara BLTR16 Manual técnico

Baby Lock

Baby Lock emore BLMR Manual de usuario

Baby Lock

Baby Lock Jewel Guía de configuración

Baby Lock

Baby Lock Ellageo BLL Manual técnico

Baby Lock

Baby Lock Jubilant BL80B Manual técnico

Baby Lock

Baby Lock BLRK3-HSLA Manual de usuario

Baby Lock

Baby Lock Endurance II BND9-2 Manual de usuario

Baby Lock

Baby Lock Destiny BLDY Manual de usuario

Baby Lock

Baby Lock Ellageo PLUS BLL2 Manual de usuario

Baby Lock

Baby Lock Decorator's Choice BLDC2 Manual técnico

Baby Lock

Baby Lock espire BLSR Manual técnico

Baby Lock

Baby Lock Solaris 2 Manual técnico

Baby Lock

Baby Lock emore BLMR Manual técnico

Baby Lock

Baby Lock Ellageo PLUS BLL2 Manual técnico

Baby Lock

Baby Lock Elageo Guía de configuración

Baby Lock

Baby Lock Audrey BL67 Manual técnico

Baby Lock

Baby Lock Triumph BLETS8 Manual de usuario

Manuales populares de Máquina de coser de otras marcas

Riccar

Riccar RL634DE Manual de usuario

Singer

Singer 2517 Manual de usuario

Pfaff

Pfaff 3307-1 SERIES Manual de usuario

Janome

Janome Quilt Maker Pro 18 VERSA Manual de usuario

Siruba

Siruba C007JP Manual de usuario

Husqvarna Viking

Husqvarna Viking Designer SE Manual de usuario

Singer

Singer 148-5 Manual de usuario

IKEA

IKEA SY Manual de usuario

Pfaff

Pfaff 571 Manual de usuario

Singer

Singer 15-91 Manual de usuario

Brother

Brother BB370 Manual de usuario

Pegasus

Pegasus WT100 Series Manual de usuario

Reliable

Reliable 7100DB Manual de usuario

Pfaff

Pfaff 937 Manual de usuario

Singer

Singer 6038 Manual de usuario

Singer

Singer 413K Manual de usuario

Pfaff

Pfaff 1471 E1 Manual de usuario

Kenmore

Kenmore 16677 - Serger Sewing Machine Manual de usuario

Baby Lock embellisher EMB12 Manual técnico

Manuales populares de Máquina de coser de otras marcas