Time setting
Your automatic watch has an approximate 48 extra working hours.
If the watch is not worn daily, the extra hours will run out and the watch will stop.
To set the time, please unscrew (A) your crown and pull it to position 3.
Position 2 on your crown is neutral.
After setting the time, return the crown to 0 by pressing and turning it to screw
without forcing (B).
Winding on
After a long time not worn, please unscrew (A) your crown, pull it to position 1
and turn the crown 5 or 6 times.
The movement starts running again.
After winding on, return the crown to by
pressing and turning it to screw without
forcing (B).
Power reserve hands
- position 0: your movement is stopped
- position 48: you have a 48H autonomy
If you do not wear your watch for 24H,
you have a 24H autonomy.
0123
A B
