B-Link Video Doorbell Manual de usuario
Blink Video Doorbell Setup Guide
Thank you for purchasing Blink! The Blink Video Doorbell lets you see and hear
what’s happening at your front door and talk back through your smartphone with
its two-way talk feature. We want you to have your Blink Video Doorbell up and
running in no time, but in order to do so, please be sure to follow all instructions.
For even more information, please visit our support site at: support.blinkforhome.com
PLEASE FOLLOW ALL INSTRUCTIONS CAREFULLY AND READ THE
SAFETY INFORMATION ON PAGE 30. FAILURE TO DO SO MAY
RESULT IN FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY.
Getting started in your Blink Home Monitor App.
Position your doorbell.
Mount your doorbell.
What to expect when installing
your doorbell:
What you may need:
1.
2.
3.
Drill
Phillips head screwdriver no. 2
Hammer
1
1
1
Page |2 Page |3
Part 1: Getting started in your Blink
Home Monitor App
1.
2.
3.
Download and launch the Blink Home Monitor App and create an account or
log into your existing one.
If you created an account, in your app select “Add a System”. If you logged into
an existing account, select “Add a Blink Device”.
Follow the in app instructions to complete setup.
For even more information, please visit our support site at: support.blinkforhome.com
We recommend connecting your Blink Video Doorbell to existing doorbell wiring
to extend your battery life even longer!
Part 2: Position your doorbell
Turn o your powe
If exposing doorbell wiring, for your safety, turn o your doorbell’s power
source at your home’s breaker or fuse box. Press your doorbell to test if the
power is o and follow the proper safety precautions before proceeding. If you
are unsure about handling electrical wiring, consult a qualied electrician.
Determine your camera location
Activate your Blink Video Doorbell live view function to determine your
doorbell’s position. You can position your Blink Video Doorbell in place of your
existing doorbell or anywhere around your door. We recommend installing
your doorbell about 4 feet o the ground.
If you’re exposing doorbell wiring, but not connecting your Blink Video
Doorbell, wrap both individual wires separately with provided tape strips to
terminate wires.
Adjust the angle with a wedge (Optional)
Do you like the view from your Blink Video Doorbell? If not, adjust it using the
provided wedge set to angle your doorbell either left, right, up or down! See
gures A and Bon pages 6 and 7 for examples.
Note: You can t the wedge over your existing wiring if you would like to wire
your Blink Video Doorbell.
Select your trim cover (Optional)
Change your Blink Video Doorbell trim to better match your home using the
provided alternative trim color. Simply snap o and snap on!
1.
2.
3.
4.
Page |4 Page |5
Figure B (Optional)
Doorbell with
vertical angled
wedge.
Figure A (Optional)
Doorbell with horizontal
angled wedge.
Door
Page |6 Page |7
If you are mounting your Blink Video Doorbell to a brick, stucco or other mortar
surface, drill pilot holes and use the included anchors prior to mounting.
Based on how you positioned your doorbell in the last step, select the mounting
option below that best describes your setup. Go to the page number provided and
follow your instructions.
Regardless of the option you choose, please make sure that you have
inserted the two AA lithium batteries prior to mounting your doorbell.
Part 3: Mount your doorbell
A. Wires, No Wedge C. No Wires, Wedge D. Wires & WedgeB. No Wires, No Wedge
You want to connect your Blink
Video Doorbell to existing wiring
and you do not need a wedge.
Go to page 10
You do not want to connect to
existing wiring and want to run
on batteries only. You do not
need a wedge.
(Note: If you don’t use existing
wiring, the doorbell will not
sound your home’s existing
doorbell chime.)
Go to page 14
You do not plan to connect your
Blink Video Doorbell to existing
wiring and you want to use a
wedge to adjust your eld of
view.
(Note: If you don’t use existing
wiring, the doorbell will not
sound your home’s existing
doorbell chime.)
Go to page 18
You want to connect your Blink
Video Doorbell to existing wiring
and you want to use a wedge to
adjust the eld of view.
Go to page 22
Page |8 Page |9
Figure AFigure B
Wires
Mounting plate
Wires
Mounting plate
For even more information, please visit our support site at: support.blinkforhome.com
Position mounting template so that wires t through the designated “wiring”
hole on template. You can nd your removable mounting template on page 35.
Use the provided mounting template to either mark drill points or drill pilot
holes for designated “mounting plate” holes.
Remove mounting plate from Blink Video Doorbell unit if you haven’t already.
Loosen wire contact screws from mounting plate to allow space to
wrap wiring.
Wrap wires around loosened screws and tighten securely (color of wire does
not matter).
Continue on to the next page.
1.
2.
3.
4.
5.
A. Wires, no wedge
Page |10 Page |11
Attach Blink Video Doorbell unit to mounting plate and secure with screw using
provided hex wrench.
Turn power back on.
Test Blink Video Doorbell and check that your house chime works.
Congratulations, you have installed your doorbell!
7.
8.
9.
Figure D
Mounting plate
Hex wrench
Set screw
Blink Video Doorbell Blink Video Doorbell
Line up mounting plate with drilled holes and secure using provided mounting
screws.
6.
Figure C
Wires
Screw 3/4 inch
Screw 3/4 inch
Mounting plate
Rubber washer
Drill hole
Rubber washer
Drill hole
Page |12 Page |13
Figure A
Screw 3/4 inch
Screw 3/4 inch
Mounting plate
Rubber washer
Rubber washer
Drill holes
Drill holes
Use the provided mounting template to either mark drill points or drill pilot
holes for designated “mounting plate” holes. You can nd your removable
mounting template on page 35.
Remove mounting plate from Blink Video Doorbell unit if you haven’t already.
Screw mounting plate to wall using provided mounting screws.
Continue on to the next page.
1.
2.
3.
For even more information, please visit our support site at: support.blinkforhome.com
B. No wires, no wedge
Page |14 Page |15
Figure B
Attach Blink Video Doorbell unit to mounting plate and secure with screw using
provided hex wrench.
Turn power back on (if applicable).
Test Blink Video Doorbell.
Congratulations, you have installed your doorbell!
4.
5.
6.
Mounting plate
Hex wrench
Set screw
Blink Video Doorbell Blink Video Doorbell
Page |16 Page |17
Figure A
Screw 3/4 inch
Screw 3/4 inch
Wedge
Drill holes
Drill holes
Use the provided mounting template to either mark drill points or drill pilot
holes for designated “wedge” holes. You can nd your removable mounting
template on page 35.
Note: Vertical wedge installation is the same as horizontal wedge installation.
Secure wedge to wall using provided mounting screws.
Continue on to the next page.
1.
2.
For even more information, please visit our support site at: support.blinkforhome.com
C. No Wires, Wedge
Page |18 Page |19
Tabla de contenidos
Otros manuales de Accesorios de B-Link
