Aztech WL630USB Manual de usuario

CONTENTS

1 INTRODUCTION TO WL630USB WIRELESS B/G USB ADAPTER........................................ 3

1.1 PACKAGE CONTENTS..................................................................................................................... 3

1.2 FEATURES ...................................................................................................................................... 3

2 INSTALLATION................................................................................................................................... 4

2.1 SYSTEM REQUIREMENTS............................................................................................................... 4

2.2 STEP 1: INSTALL THE DRIVER & UTILITY ...................................................................................... 4

2.3 STEP 2: INSTALL THE DEVICE........................................................................................................ 7

2.4 VERIFY INSTALLATION.................................................................................................................... 9

2.5 UNINSTALLATION............................................................................................................................ 9

3 NETWORK CONNECTION ............................................................................................................... 9

3.1 IN WINDOWS 98SE/ME................................................................................................................. 9

3.2 IN WINDOWS 2000/XP ................................................................................................................ 11

4 IP ADDRESS ..................................................................................................................................... 11

5 CONFIGURATION UTILITY............................................................................................................ 12

5.1 STATUS......................................................................................................................................... 13

5.2 MORE SETTING ............................................................................................................................ 14

5.3 WEP KEY SETTING ..................................................................................................................... 16

5.4 WPA SETTING ............................................................................................................................. 17

5.5 ADVANCED SETTING .................................................................................................................... 18

Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.

WL630USB Wireless B/G

USB Adapter

User Manual

Version 1.0

Declaration of Conformity

FCC Certification

The United States Federal Communication Commission (FCC) and the Canadian Department

of Communications have established certain rules governing the use of electronic equipment.

Part15, Class B

This device complies with Part 15 of FCC rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interface, and

2) This device must accept any interface received, including interface that may cause

undesired operation. This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy, and if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

CAUTION:

1. To comply with FCC RF exposure compliance requirements, a separation distance of at

least 20 cm must be maintained between the antenna of this device and all persons.

2. This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

The WL630USB Wireless B/G USB Adapter is designed for creating a wireless workstation

for notebook or desktop computer. It is compatible with any USB-equipped computers.

The WL 630USB Wireless B/G USB Adapter is compliant with both Wireless-G (802.11g) and

Wireless-B (802.11b). It delivers data rates up to 54Mbps. With this incredible speed, you are

able to access the Internet easily anywhere in the building.

Make sure that you have the following items. If any of the items is damaged or missing,

please contact your dealer immediately.

WL630USB Wireless B/G USB Adaptor (Qty:1) Easy Start (Qty:1)

Installation CD (Qty:1) USB Extension Cable (Qty:1)

• Complies with IEEE 802.11g standard for 2.4GHz Wireless LAN

• USB 2.0 compliant

• USB Plug & Play

• Interoperable with existing network infrastructure

• Secure information transmission

• Freedom to roam while staying connected

• Compatible with specialty wireless products and services

• Up to 54 Mbps data rate

• Antenna is built in the card with LED indication

• Low power consumption

• Easy to install and configure

Do not insert the wireless LAN

card into your computer until the

procedures in “ Install the Device

& Utility ” have been performed.

• Desktop PC or Notebook PC

• Pentium® 233 processor or higher

• 64MB RAM

• 20MB hard disk space (system files and modem driver only)

• A free USB Port

• CD-ROM drive

• Windows® 98 SE / Windows® Me / Windows® XP / Windows® 2000

Caution!!!

Important Note:

Connect to an USB 2.0 USB host to have maximum rate of 54Mbps

(802. 11g).

If connected to an USB 1.1 USB host, the maximum rate will be 11 Mbps

(802.11b) only.

1. Exit all Windows programs. Insert the Installation CD into your CD-ROM. The CD will run

automatically. If the Installation CD auto run fails, please run the “Setup.exe” file in the

CD.

For Windows 98SE/ME

2. When the Welcome screen appears, click “Next” to continue.

3. The below screen will be shown. Click “Next” to continue and the installation program

will start running automatically.

4. When the below screen is shown, click “Finish” to complete the installation.

For Windows 2000/XP

2. When the Welcome screen appears, click “Next” to continue.

3. The below screen will be shown. Click “Next” to continue and the installation program will

start running automatically.

4. For Windows 2000 when the “Digital Signature Not Found” screen appears, click

“Yes” to continue the installation.

For Windows XP when the “Software Installation” screen appears, click “Continue

Anyway” to continue the installation.

5. When the below screen is shown, click “Finish” to complete the driver and utility

installation.

Note: Before you install the device to your computer, make sure you have

installed the driver and utility as described in the previous section.

1. Locate your USB host and insert the USB Adapter.

2. Once the device has been inserted to your computer,

Windows will detect the new hardware.

3. Windows will begin copying the files to your computer.

For Windows 98SE/ME

4. Before installing the device, make sure you have your original Windows 98 CD-ROM on

hand. When the prompt for “Windows 98 Second Edition CD-ROM” window appears,

insert the CD-ROM as requested. Click “OK” to continue the installation.

5. The installation will continue and the system may prompt for a “Version Conflict”. Click

“Yes” to keep the existing file. This completes the installation of the device.

For Windows 2000

4. When the “Digital Signature Not Found” screen appears, click “Yes” to continue the

installation.

5. This completes the installation of the device.

For Windows XP

4. When below is prompted, click “Next” to continue the installation.

5. When the “Software Installation” screen appears, click “Continue Anyway” to continue

the installation.

6. When the following screen appears, click “Finish” to complete the installation of the

device.

To verify if the device exists in your computer and works, go to Start ÆSettings ÆControl

Panel ÆSystem ÆHardware ÆDevice Manager. Expand the Network Adapters

category. If the WL630USB Wireless B/G USB Adapter is listed here, it means that your

device is properly installed and enabled.

1. To uninstall the driver and utility, go to the Control Panel of your system.

2. Open the Add/Remove Programs.

3. Select the WL630USB Wireless B/G USB Adapter in the Add/Remove Programs and

then click on the Remove.

4. Follow the on screen instructions to uninstall the driver and utility. After the uninstallation,

plug out the device and reboot the system.

Once the device driver is well installed, a network setting described in the following should be

also established.

1. Go to Start ÆSettings ÆControl Panel ÆNetwork.

Make sure that all the required components are installed. If any components are missing,

click on the “Add”button to add them in.

2. For making your computer visible on the network, enable the “File and Print Sharing…”

and check on the boxes as shown.

3. Click the “Identification” tab. Make up a name that is unique from the other computers'

names on the network. Type the name of your workgroup, which should be the same

used by all of the other PCs on the network.

4. Click the “Access Control” tab. Make sure that “Share-level access control” is selected.

If connecting to a Netware server, share level can be set to “User-level access control”.

6. When finished, restart your computer to activate the new device.

Tabla de contenidos

Otros manuales de Adaptador de Aztech

Aztech

Aztech HL112E Guía

Aztech

Aztech WL230USB Wireless B+G Manual de usuario

Aztech

Aztech Easy Guía

Aztech

Aztech WL635USB Manual de usuario

Aztech

Aztech WL558USB Manual de usuario

Aztech

Aztech Wireless N USB Adapter Instrucciones de uso

Aztech

Aztech WL230USB-L Manual de usuario

Aztech

Aztech HL113 E Manual de usuario

Aztech

Aztech HL129EP Instrucciones de uso

Aztech

Aztech HL110E Manual de usuario

Aztech

Aztech WL562USB Manual de usuario

Aztech

Aztech WL552USB Manual de usuario

Aztech

Aztech 200Mbps HomePlug AV Ethernet Adaptor Manual de usuario

Aztech

Aztech WL568USB Manual de usuario

Aztech

Aztech WL562 Manual de usuario

Aztech

Aztech HL105E Manual de usuario

Aztech

Aztech WL572USB Instrucciones de uso

Aztech

Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor Manual de usuario

Aztech

Aztech HL113EW Instrucciones de uso

Aztech

Aztech HL117EP Instrucciones de uso

Aztech

Aztech WL582USB Instrucciones de uso

Aztech

Aztech HL110E Instrucciones de uso

Aztech

Aztech Shiro HL100E Hoja de información del producto

Aztech

Aztech HomePlug Mediaxtream Ethernet Adapter Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario