Ayrton Lynx Control Manual de usuario

KEEP THIS MANUAL FOR FUTURE NEEDS

Thank you for choosing our equipment. We are confident that our excellent products and service can

satisfy you.

For your own safety, please read this user manual carefully before using this device.

INTRODUCTION:

Thank you for choosing this professional tool.

Unpacking the device. You should find in the box:

lOne USB cable

lOne charger

lOne MICRO SD card

lOne MICRO SD card reader

lOne manual

Please check carefully that there is no damage caused by transportation. Should there be any, please

contact your dealer and don’t use this device.

Features:

ØEasily software upgrade

ØLCD display

ØFriendly operation interface

ØSuitable for products with software upgrading function

OVERVIEW

1DMX output socket

2LCD-Display

3MODE/ESC –button

4LEFT-button

5DOWN-button

6ENTER-button

7RIGHT-button

8UP-button

9Power switch

10MICRO SD socket

11Power supply

SAFETY INSTRUCTIONS

This LYNX CONTROL left the factory in perfect condition. In order to maintain this condition and

to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and

warning notes written in this user manual.

The LYNX CONTROL shall only be used with right voltage and frequency.

Make sure that the available voltage is not higher than stated at the end of this manual.

Make sure the power cord is never crimped or damaged by sharp edges.

If the external flexible cable or cord of this device is damaged, it shall be exclusively replaced by the

manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

Please be aware that damages caused by manual modifications to the LYNX CONTROL are not

subject to warranty. Keep away from children and non-professionals.

GENERAL GUIDELINES

ØDo not use this device until you are familiar with its functions. Do not permit operation by

persons not qualified for operating the device. Most damages are the result of unprofessional

operation.

ØFor safety reasons, please be aware that all modifications on the LYNX CONTROL are

forbidden.

ØIf this device is operated in any way different to the one described in this manual, the product

may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead

to dangers like short-circuit, burns, electric shock, etc.

DMX-512 control connection

Connect the signal input port of the lighting fixture to the signal output port of the LYNX

CONTROL (below fixtures are for reference))

Important : connect the fixture and LYNX CONTROL before start up the box. Switch On the LYNX

CONTROL first and then the fixtures.

USER MANUAL

Step1: Insert the MICRO SD card with software release into the MICRO SD port. Connect the

signal output cable of the LYNX CONTROL to the signal input port of the lighting; switch On the

LYNX CONTROL and select the required folder.

Switch ON the units linked to the LYNX CONTROL; “Long Wait” should be displayed on the units.

Step2: Press to enter the SD card menu, the screen will show “Browser”, “Option” and

“SoftInfo”. Select “Browser”.

Step3: Press  to select corresponding fixture model and software

version.Press to confirmOpen the folder you have selected. GSD file and TXT file will be

displayed on the screen. When you select the GSD file, its function will be displayed on the bottom

left of the screen.

Step4: Press    to choose the GSD file you want to upgrade. Press

to confirm. Then enter the password (000000) move the cursor on the “ ”press to confirm.

If an error has been done when entering the password, move the cursor on the “ ”press

to delete, then enter the correct one.

5-1

Step5: Once the upgrade done, you will be prompted to continue the upgrade or exit this procedure.

5-2

Installation of the battery

Notice:

1) Please use the battery provided by the supplier .

2) Please charge the battery when low power .

CLEANING AND MAINTENANCE

The following points have to be considered during the inspection:

1) All screws for installing the devices or parts of the device have to be tightly connected and must

not be corroded.

2The electric power supply cables must not show any damage.

Further instructions depending on the installation spot and usage have to be adhered by a skilled

installer and any safety problems have to be removed.

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use

alcohol or solvents.

There are no serviceable parts inside the device. Please refer to the instructions under “Installation

instructions”.

Should you need any spare parts, please order genuine parts from your local dealer.

TECHNICAL SPECIFICATIONS

Power supply: DC5V

Packing dimensions: 21.5 x 18.5 x 7.5 cm / (2Pcs)

Net weight: 0.128 kg

Gross weight: 0.4 kg

Tabla de contenidos

Otros manuales de Equipo de iluminación de Ayrton

Ayrton

Ayrton Mistral TC Manual de usuario

Ayrton

Ayrton Levante S Manual de usuario

Ayrton

Ayrton Diablo S Manual de usuario

Ayrton

Ayrton icecolor 250 Manual de usuario

Ayrton

Ayrton magicpanelR Manual de usuario

Ayrton

Ayrton icecolor 1000 Manual de usuario

Ayrton

Ayrton Huracan Manual de usuario

Ayrton

Ayrton eurus s Manual de usuario

Ayrton

Ayrton madesign Manual de usuario

Ayrton

Ayrton ZONDA 9 WASH Manual de usuario

Ayrton

Ayrton domino WASH Manual de usuario

Ayrton

Ayrton WILDSUN500 Manual de usuario

Ayrton

Ayrton easyColor Manual de usuario

Ayrton

Ayrton huracan WASH Manual de usuario

Ayrton

Ayrton Huracan Manual de usuario

Ayrton

Ayrton wild sun 200 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario