Axon Synapse DEE28 Manual de usuario
Committed.
DEE28
Multi format Dolby stream decoder and Dolby E
encoder with Quad-Speed audio bus and voice
over module
Installation and Operation manual
Hercules 28
NL-5126 RK Gilze
The Netherlands
Phone: +31 (0)161 85 04 50
Fax: +31 (0)161 85 04 99
E-mail: [email protected]
Web: www.axon.tv
TECHNICAL MANUAL
DEE28
3
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE
● ALWAYS disconnect your entire system from the AC mains before cleaning any component. The product
frame (SFR18, SFR08 or SFR04) must be terminated with three-conductor AC mains power cord that
includes an earth ground connection. To prevent shock hazard, all three connections must always be used.
● NEVER use flammable or combustible chemicals for cleaning components.
● NEVER operate this product if any cover is removed.
● NEVER wet the inside of this product with any liquid.
● NEVER pour or spill liquids directly onto this unit.
● NEVER block airflow through ventilation slots.
● NEVER bypass any fuse.
● NEVER replace any fuse with a value or type other than those specified.
● NEVER attempt to repair this product. If a problem occurs, contact your local Axon distributor.
● NEVER expose this product to extremely high or low temperatures.
● NEVER operate this product in an explosive atmosphere.
Warranty: Axon warrants their products according to the warranty policy as described in the general terms.
That means that Axon Digital Design BV can only warrant the products as long as the serial numbers are not
removed.
Copyright © 2001 – 2016 AXON Digital Design B.V.
Date created: 26-01-2015
Date last revised: 03-06-2016
Axon, the Axon logo and Synapse are trademarks of Axon Digital Design B.V.
This product complies with the requirements of the product family standards for audio, video, audio-visual
entertainment lighting control apparatus for professional use as mentioned below.
EN60950
EN55103-1: 1996
EN55103-2: 1996
Safety
Emission
Immunity
Axon Digital Design DEE28
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
4
Table of Contents
Table of Contents 4
Introduction to Synapse 7
An Introduction to Synapse 7
Local Control Panel 7
Remote Control Capabilities 7
Unpacking and Placement 8
Unpacking 8
Locating the card 8
A Quick Start 9
When Powering-up 9
Default settings 9
Changing settings and parameters 9
Front Panel Control 9
Example of changing parameters using front panel control 10
Axon Cortex 11
Menu Structure Example 11
The DEE28 Card 12
Introduction 12
Applications 13
Program Procedure 13
Block schematics 13
Settings Menu 14
Introduction 14
SRC 14
Lock-Mode 14
Backup 14
In_Out 14
Dolby_firmware 15
Output_1_mux ~ Output_4_mux 15
Dolby _in 15
Ch_main_in 15
Dolby_PCM_backup 15
Ch_backup 16
Sel_Ch1 ~ Sel_Ch16 16
Ch_1 ~ Ch_16 16
Gain-CH_1 ~ Gain-CH_16 16
Phase-CH_1 ~ Phase-CH_16 16
Stereo-CH_1/2 ~ Stereo-CH_15/16 16
Delay_CH_1/2 ~ Delay_CH_15/16 17
Override 17/24 17
Override 25/32 17
VO_Trigger 17
VO_Sel 18
VO_Ch 18
VO_Scale 18
VO_Trglvl 18
VO_Delay 18
VO_Hold 18
VO_Release 18
VO_Rampdown 18
VO_Ch_1 ~ VO_Ch_16 18
Slot1/2 ~ Slot31/32 19
Meta_BUS 19
Mon_out_program 19
Backup_out12 19
Backup_out34 19
Backup_out56 19
Backup_out78 19
Downmix 19
PCM_metadata 20
PCM_latency 20
VsyncALIGN 20
VsyncINP 20
VsyncENA 20
Ad_mix 21
Ad_2ch_mix 21
Operating_mode 21
Meta_Prgm_Sel 21
Loudness_type 21
Loud_Prgm 22
Loud-ext_RST 22
Ld_DDp_Select 22
Ld_PCM_Select 22
Main_DRC_DD 24
Main_DRC_E 24
Main_DRC_PCM 24
Aux_DRC_DD 24
Aux_DRC_E 24
Aux-DRC_PCM 24
5
GD_Shift 24
Prgm 25
MD_loss 25
GPI_2_prgm 25
#Metadata_set 25
#Prgm_text 25
#Bitstrm 26
#Dialogue_Lev 27
#Ch_mod 27
#Line 27
#RfMode 28
#D Srnd 28
#Pref dwnmx 28
#Lt/RT C dwnmx 28
#Lt/RT S dwnmx 28
#Lo/Ro C dwnmx 28
#Lo/Ro S dwnmx 28
#Srnd EX 29
#DC filter 29
#LFE filter 29
#Lowpass Filter 29
#Srnd 3Db atten 29
#Srnd_Ph_Shift 30
DolbyE Depth 30
Category 30
Parameter 30
Status Menu 31
Introduction 31
Lock 31
AES_Inp_1 ~ AES_Inp_4 31
Ch_1_Val ~ Ch_16_Val 31
Main_In 31
Backup_In 31
Decoder_In 31
Ref_Input 31
Nr_programs 31
(MD) Program 31
(MD) Bit_Depth 32
(MD) Dialogue_Lev 32
(MD) Datarate 32
(MD) Bitstream 32
(MD) Channel_Mode 32
(MD) LFE 32
(MD) Pref_Dwn_Mix 32
(MD) Center_mix_lvl 32
(MD) Surr_mix_lvl 32
(MD) Lt/Rt_center 32
(MD) Lt/Rt_surr 32
(MD) Lo/Ro_center 32
(MD) Lo/Ro_surr 32
(MD) DC_highpass 32
(MD) BW_lowpass 32
(MD) LFE_lowpass 32
(MD) Surr_90 32
(MD) Surr_3dB 33
(MD) Dynamic_compr 33
(MD) RF_compr 33
(MD) Surr_mode 33
(MD) Surr_ex_mode 33
(MD) Mix_meta 33
(MD) Mix_Control 33
(MD) Pscale_Ena 33
(MD) EXT_prgmscale 33
(MD) Pscale_L_Ena 33
(MD) Pscale_L 33
(MD) Pscale_C_Ena 33
(MD) Pscale_C 33
(MD) Pscale_R_Ena 33
(MD) Pscale_R 33
(MD) Pscale_Ls_Ena 34
(MD) Pscale_Ls 34
(MD) Pscale_Rs_Ena 34
(MD) Pscale_Rs 34
(MD) Pscale_LFE_Ena 34
(MD) Pscale_LFE 34
(MD) PanMean_Ena 34
(MD) PanMean 34
Int_UGTD_ld 34
Int_SPCHGTD_ld 34
Int_LVLGTD_ld 34
Int_10sUGT_ld 34
Int_10sSPCHGTD_ld 34
Int_3sUNGTD_ld 35
MOM_ld 35
S10s_ld 35
6
INT_SPCH_ld 35
INT_LD_range 35
SMPL_PEAK_0 ~ SMPL_PEAK_7 35
TRUE_PEAK_0 ~ TRUE_PEAK_7 35
DDpRATE 35
Program_Discr 35
EXT_meta_pres 35
Enc rate 35
Value 35
GPI_1 35
GPI_2 35
GPI_3 35
Events Menu 36
Introduction 36
What is the Goal of an event? 36
DEE28 Events 36
Announcements 36
Audio-Data 36
Reference 36
What information is available in an event? 36
The Message String 36
The Tag 37
Defining Tags 37
The Priority 37
The Address 37
LED Indication 38
ERROR 38
INPUT 1 ~ INPUT 8 38
REFERENCE 38
DATA ERROR 38
CONNECTION 38
Block Schematics 39
Connector Panel 40
Pin description 42
Metadata cable DEE28/DBE08 43
Quad speed ADD-ON bus 44
Some examples 46
7
1
Introduction to Synapse
An Introduction to
Synapse
Synapse is a modular system designed for the broadcast industry. High
density, intuitive operation and high quality processing are key features
of this system. Synapse offers a full range of converters and processing
modules. Please visit the AXON Digital Design Website at www.axon.tv
to obtain the latest information on our new products and updates.
Local Control Panel
The local control panel gives access to all adjustable parameters and
provides status information for any of the cards in the Synapse frame,
including the Synapse rack controller. The local control panel is also
used to back-up and restore card settings. Please refer to the rack
controller manuals for a detailed description of the local control panel,
the way to set-up remote control over IP and for frame related settings
and status information.
Remote Control
Capabilities
The remote control options are explained in the rack controller manual.
The method of connection to a computer using Ethernet is described in
those manuals as well.
!
CHECK-OUT: “AXON CORTEX” SOFTWARE WILL
INCREASE SYSTEM FLEXIBILITY OF ONE OR MORE
SYNAPSE FRAMES
Although not required to use Axon Cortex with a Synapse frame, you are
strongly advised to use a remote personal computer or laptop PC with
Axon Cortex installed as this increases the ease of use and understanding
of the modules.
8
2
Unpacking and Placement
Unpacking
The Axon Synapse card must be unpacked in an anti-static environment.
Care must be taken NOT to touch components on the card – always
handle the card carefully by the edges. The card must be stored and
shipped in anti-static packaging. Ensuring that these precautions are
followed will prevent premature failure from components mounted on
the board.
Locating the card
The Synapse card can be placed vertically in an SFR18 frame or
horizontally in an SFR08 or SFR04 frame. Locate the two guide slots to
be used, slide in the mounted circuit board, and push it firmly to locate
the connectors.
Correct insertion of card is essential as a card that is not located properly
may show valid indicators, but does not function correctly.
Note: On power up all LEDs will light for a few seconds, this is the time
it takes to initialise the card.
9
3
A Quick Start
When Powering-up
On powering up the Synapse frame, the card set will use basic data and
default initialization settings. All LEDs will light during this process.
After initialization, several LEDs will remain lit – the exact number and
configuration is dependant upon the number of inputs connected and the
status of the inputs.
Default settings
In the default condition, the DEE28 acts as a Dolby E decoder locked to
ref input 1, decoding into AES outputs using external incoming meta
data program streams.
Changing settings
and parameters
The front panel controls or Axon Cortex can be used to change settings.
An overview of the settings can be found in chapter 5, 6 and 7 of this
manual.
Front Panel Control
Front Panel Display and Cursor
Settings are displayed and changed as follows;
Use the cursor ‘arrows’ on the front panel to select the menu and
parameter to be displayed and/or changed.
Press ► To go forward through the menu structure.
Press ◄ To go back through the menu structure.
Press ▲ To move up within a menu or increase the value of
a parameter.
Press ▼ To move down through a menu or decrease the
value of a parameter.
REMARK: Whilst editing a setting, pressing ► twice will reset the value
to its default.
[No Alarms]
10
Example of changing
parameters using
front panel control
With the display as shown below
Pressing the ► selects the SFS10 in frame slot 01.
The display changes to indicate that the SFS10 has been selected. In this
example the Settings menu item is indicated.
Pressing the ► selects the menu item shown, in this example
Settings.
(Pressing ▲ or ▼ will change to a different menu eg Status,
Events).
The display changes to indicate that the SFS10 Settings menu item
SDI-Format has been selected and shows that it current setting is
Auto.
Pressing the ► selects the settings item shown, in this example SDI-
Format.
(Pressing ▲ or ▼ will change to a different setting, eg Mode, H-
Delay).
The display changes to indicate that the SFS10 Edit Setting menu
item SDI-Format has been selected.
To edit the setting of the menu item press ▲ or ▼.
All menu items can be monitored and/or changed in this way. Changing a
setting has an immediate effect.
RRC18 [Select Card]
>S01=SFS10
SFS10 [Select Menu]
>Settings
SFS10 [Settings]
>SDI-Format=Auto
SFS10 [Edit
Setting]
Tabla de contenidos
Otros manuales de Convertidor de medios de Axon
Axon
Axon Synapse GDS100 Manual de usuario
Axon
Axon Flex 2 Manual de usuario
Axon
Axon Synapse ASV22 Manual de usuario
Axon
Axon AXON AX-100 SB Manual de usuario
Axon
Axon Synapse DBD18 Manual de usuario
Axon
Axon Synapse ASV12 Manual de usuario
Axon
Axon Synapse SCV12 Manual de usuario
Axon
Axon Synapse HEB05 Manual de usuario
