Axis AXDL-100 Instrucciones de montaje
AXIS DUAL INCUBATOR MANUAL GUIDE
The Axis AXDL-100 Dual Incubator has been designed for incubation of self-contained
biological indicators for Steam, Eto, Formaldehyde and Plasma. The Axis AXDL-100
incubator works at an environmental temperature of 15 - 35 ºC, relative humidity of 35 - 85 %
and the voltage 220 volts.
10006/1 No:43 AOSB Cıglı IZMIR TURKEY
Tel:+90 232 348 60 60
www.kordontip.com - [email protected]
Manufacturer:
AXIS AXDL-100 DUAL INCUBATOR
AXIS DUAL INCUBATOR MANUAL GUIDE
128x64 OLED SCREEN
CASE
PLASTIC COVER
Directions for use
1. Connect the incubator to a power supply network of voltage .
On the screen first AXIS logo will appear than set temperature will be seen.
If the incubator set to 37°C operator will see “S37°” and “S60°” if arranged to 60°C.
2. Select/change the incubation temperature using the switch button located at the base of
the incubator.
NOTE: Incubator has 128x64 OLED SCREEN. Temperature, high and low temperature
warnings can be seen from here. These meanings;
LA : low temperature HA : high temperature
3.Arranged temperature will be reached in 1-1,5 hour. If the required temperature does not
reach in this time incubator will give “LA “ warning. Also if the temperature increases more
than adjusted incubator will give “HA” warning in 4-5 seconds. When operator goes 60°C
to 37°C first incubator will give “HA” alarm than the temperature will slowly drop.
IMPORTANT: Check that the incubation temperature is the correct one.
4.Incubate at 37ºC (for eto,dry heat) or 60ºC (for steam,plasma and formaldehyde). Color
change of the growth indicating medium shows a failure in the sterilization process. Please
check Biological Indicator manual to interpret results.
5.A color change in the protein pen indicates the presence of detectable levels of protein.
BI HOLES
BI CRUSHER
10006/1 No:43 AOSB Cıglı IZMIR TURKEY
Tel:+90 232 348 60 60
www.kordontip.com - [email protected]
Manufacturer:
ŸWeight: 0.810 kg
ŸVoltage range: 110-220 V
ŸPower: 20 W
AXIS DUAL INCUBATOR MANUAL GUIDE
LABEL
STAND
TEMPERATURE
SWITCH BUTTON
37°C
60°C
60°C
37°C
Dimensions:
12.5 cm high, 12 cm diameter.
46 metal positions
39 position for BI :
1.3 cm diameter, 3.0 cm deep
7 position for Protein Pen :
0.9 cm diameter, 3.0 cm deep
Special hole for external thermometer
1 ampoule crusher.
POWER
SUPPLY
INPUT
Warning!
Do not pour any liquid inside.
Do not immerse in any liquid.
Only for indoor use.
Disconnect the power cord before cleaning.
Do not use abrasive or corrosive cleaners or disinfectants.
The incubator should be sent to the manufacturer for repair.
Make sure that the incubator is connected to a properly rated power cord.
Warranty
Kordon Tıp Ltd guarantees both the quality of the product material components and the quality of its
manufacturing process. Should any material or manufacturing faults be detected within the warranty period
(1 year from the time of purchase), the only obligation of Kordon Tıp Ltd will be product repairing or
substitution.
Limitation of Liability
Kordon Tıp Ltd shall not be liable for any loss or damage that may result from the unsuitable use of the
equipment, negligence or user's full responsibility.
Disposal
Dispose BI and incubator according to your country disposal regulations.
Symbols
Operating relative humidity.
Operating environmental temperature.
Caution
Caution:risk of electric shock.
Caution:hot surface.
Attention:read usage and operating instructions.
15°C
35°C
35-85%
10006/1 No:43 AOSB Cıglı IZMIR TURKEY
Tel:+90 232 348 60 60
www.kordontip.com - [email protected]
Manufacturer:
Otros manuales de Accesorios de Axis
Axis
Axis F7225-RE Manual de usuario
Axis
Axis AX18F003 Manual de usuario
Axis
Axis FA1125 Manual de usuario
Axis
Axis F1025 Manual de usuario
Axis
Axis T8342 Manual de usuario
Axis
Axis F8804 Manual de usuario
Axis
Axis F1035-E Manual de usuario
Axis
Axis 0734-001 Manual de usuario
Axis
Axis T8342 Manual de usuario
Axis
Axis FA1080-E Manual de usuario
Axis
Axis 260A12 Manual de usuario
Axis
Axis TW1200 Manual de usuario
Axis
Axis F4105-LRE Manual de usuario
Axis
Axis F9114 Manual de usuario
Axis
Axis T8341 Manual de usuario
Axis
Axis FA4115 Manual de usuario
Axis
Axis 01728-001 Manual de usuario
Axis
Axis F2115-R Manual de usuario
Axis
Axis 0737-001 Manual de usuario
Axis
Axis F2105-RE Manual de usuario
