AXIOMTEK IMB200 Manual de usuario

IMB200

Intel® PentiumD/Pentium4/Celeron D

Industrial ATX Motherboard

User’s Manual

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. AXIOMTEK Co., Ltd. assumes no

responsibility for any infringements of patents or other rights of

third parties which may result from its use.

AXIOMTEK assumes no responsibility for any inaccuracies that

may be contained in this document. AXIOMTEK makes no

commitment to update or to keep current the information

contained in this manual.

AXIOMTEK reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, stored in a

retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of AXIOMTEK Co., Ltd.

Aug 2006, Version A1

ESD Precautions

Integrated circuits on computer boards are sensitive to static

electricity. To avoid damaging chips from electrostatic

discharge, observe the following precautions:

Do not remove boards or integrated circuits from their

anti-static packaging until you are ready to install them.

Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This helps to discharge any static electricity on

your body.

Wear a wrist-grounding strap, available from most

electronic component stores, when handling boards and

components.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM is a registered trademark of International Business

Machines Corporation.

MS-DOS, and Windows 2000 are trademarks of Microsoft

Corporation.

Award is a trademark of Award Software, Inc.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel Pentium D, Pentium4, Celeron D is trademarks of Intel

Corporation.

Other brand names and trademarks are the properties and

registered brands of their respective owners.

T a b l e o f C o n t e n t s

Disclaimers....................................................................ii

ESD Precautions........................................................... iii

Chapter 1 Introduction........................................................1

1.1 General Description .............................................1

1.2 Specifications ......................................................2

1.3 Utilities Supported................................................3

1.4 Ordering information ............................................3

1.4 Board Dimensions................................................4

Chapter 2 Jumpers and Connectors....................................5

2.1 Board Layout .......................................................5

2.2 Jumper Settings...................................................6

2.2.1 Watchdog Tigger Mode: JP2……………………….. 6

2.2.2 COM1 RS232/422/485 Settings: JP4, JP5,JP6….. 7

2.2.3 Clear CMOS Setting: JP7…………………………… 7

2.2.4 CF Master/Slave Setting: JP8………………………. 7

2.2.5 CF Power Setting: JP9………………………………. 8

2.3 Connectors ..........................................................9

Chapter 3 Installation ........................................................11

3.1 CPU Installation ....................................................11

3.2Installing ATX Power Supply…………………………..18

3.3 Installing the Memory .............................................18

Chapter 4 Hardware Description .......................................20

4.2 Enhane IDE1/IDE2 connecotor-IDE1 and IDE2........21

4.3 Display interface-CN1.............................................22

4.4 Floppy Disck Connector-FDD..................................22

4.5 Parallel Port Connector ..........................................23

4.6 COM1 Port Connector-CN2.....................................24

4.7 COM2/3/4 Port Connector-CN25/CN27/CN33 support

RS232.........................................................................25

4.8 USB and Giagbit LAN RJ-45 Connector-CN6...........25

4.9 USB and 10/100Mb LAN RJ-45 Connector-CN7.......26

4.10 USB Connector by pin header-CN30 .....................26

4.11 Audio Jack (Line-in/Line-Out/MIC)-CN3.................27

4.12 ATX12V CPU Power Connector: CN14..................27

4.13 Serial ATA Connectors-CN28/CN29 ......................28

4.14 PS/2 Keyboard/Mouse connector-CN4 ..................29

4.15 Digital I/O Connector-CN38 ..................................29

4.16 CD/In Connector-CN9...........................................30

4.17 CPU/System FAN Connector-CN23/CN24 .............31

Chapter 5 Installing VGA driver.........................................32

5.1 Introduction........................................................32

5.2 Driver Disks’ Contents........................................32

5.3 Windows 2000 VGA Driver Installation................32

5.4 Windows XP VGA Driver Installation...................34

Chapter 6 Installing LAN Driver........................................35

6.1 Introduction........................................................35

6.3 Drivers Supported..............................................35

Chapter 7 Award BIOS Utility ...........................................36

7.2 BIOS Setup........................................................36

7.3 Standard CMOS Setup.......................................38

7.4 Advanced BIOS Features ...................................41

7.4.1 CPU Feature………………………………………….41

7.4.2 Hard Disk Boot Priority………………………………43

7.5 Advanced Chipset Features................................46

7.6 Integrated Peripherals........................................50

7.6.1 On-Chip IDE Device………………………………… 50

7.6.2 Onboard Device……………………………………. 52

7.6.3 Super IO Device…………………………………….54

7.7 Power Management Setup..................................57

7.8 PNP/PCI Configuration.......................................60

7.9 PC Health Status ...............................................62

7.10 Frequency/Voltage Control.................................63

7.11 Load Fail-Safe Default..........................................64

7.12 Load Optimized Default ........................................64

7.13 Supervisor/User Password Setting........................64

7.14 Exit Setting...........................................................66

A p p e n d i x A Watchdog Timer....................................68

A p p e n d i x B PCI IRQ Routing.....................................69

PICMG PCI IRQ Routing................................69

On Board Device IRQ Routing .......................69

AppendixC Detailed memory Addess Mapping ................70

AppendixD I/O Shield........................................................71

IMB200 LGA775 ATX MB User Manual

Introduction

Chapter 1 Introduction

1.1 General Description

The IMB200 supports LGA775-pin Intel® Pentium® D (Intel

Dual-Core) processor up to 3.6GHz with a 533/800MHz front

side bus (FSB), and features an Intel® 865G + ICH*5

chipset. With Intel dual-core processing technology, the

IMB200 provides the excellent performance to handle

multitasking and to run multiple applications

simultaneously. The IMB200 is specially suited for the

solutions which need more effective computing and

reliability, such as Digital Video Recorder/Gamine

Machine/Point of Service System/Video Server/Intelligent

Transmit System and so on.

IMB200 LGA775 ATX MB User Manual

Introduction

1.2 Specifications

¾Processor: Intel®Pentium D/Pentium4/Celeron

¾North Bridge: Intel®82865G

¾South Bridge: Intel®82801EB(ICH5)

¾CPU Socket: LGA775

¾FSB: 533/800 Mhz

¾L2 Cache: Integrated in CPU(Depend on CPU)

¾BIOS: Phoenix Award BIOS Rev.6.00

¾System Memory: Support Dual Channel DDR

266/333/400 memory and the maximum capacity up to

4GB.

CPU FSB DDR Type DDR Frequency

800MHz PC3200/PC2700/PC2100 400/333*/266MHz

533MHz PC2700/PC2100 333/266MHz

*Because limited of chipset, when using FSB800Mhz CPU,

PC2700 DDR (333 MHz) only supports 320 MHz.

¾IDE Interface: Two IDE connector and up to four devices,

Ultra DMA 100 supported

¾FDD Interface: Supports up to 2 drives

¾Serial Ports: RS232/422/485 Portx1,RS232 Portx3

¾Parallel Ports: One parallel port with ECP/EPP/SPP

supported

¾VGA Controller:

¾Chipset Integrated VGA Controller and Supports up to

2048x1536 at 75 Hz resolution on non-interlaced CRT

monitors

¾Ethernet: Intel82547GI/Intel82562ET

¾SATA: Two Channel and support the maximum data

transfer rate could up to 150MB/s

IMB200 LGA775 ATX MB User Manual

Introduction

¾CF Socket: Support CF Type II Socket

¾USB Interface: 4 USB ports; USB Spec. Rev. 2.0

compliant.

¾Hardware Monitoring: Winbond W83627HG-AW

detection of CPU temperature, System temperature,

Power failure and Fan speed.

¾Watchdog Timer:

Software programmable time interval and hardware reset

Only (1~255 seconds)

¾Dimensions:304.8mmx243.8mm(4 Layer)-ATX Former

¾Environmental:

Operating temperature 0 degrees to 60 degrees(Depends on CPU)

CPU Relative Humidity 95%

NOTE: Specifications are subject to change without

notice.

1.3 Utilities Supported

zIntel®865G Utility and Drivers

zEthernet Utility and Drivers

zVGA Drivers

zAudio Driver

1.4 Ordering information

Model number Description

IMB200VGE Intel547GI/Intel82562ET LAN

IMB200VG Intel547GI

IMB200 LGA775 ATX MB User Manual

Introduction

1.4 Board Dimensions

Otros manuales para IMB200

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de AXIOMTEK

AXIOMTEK

AXIOMTEK MPC152-832 Manual de usuario

AXIOMTEK

AXIOMTEK PICO841 Manual de usuario

AXIOMTEK

AXIOMTEK PICO822 Manual de usuario

AXIOMTEK

AXIOMTEK CAPA830 Manual de usuario

AXIOMTEK

AXIOMTEK SHB100 Manual de usuario

AXIOMTEK

AXIOMTEK MMB501 Manual de usuario

AXIOMTEK

AXIOMTEK SBC82810 Series Manual de usuario

AXIOMTEK

AXIOMTEK CAPA315 Manual de usuario

AXIOMTEK

AXIOMTEK PICO121 Manual de usuario

AXIOMTEK

AXIOMTEK PICO312 Manual de usuario

AXIOMTEK

AXIOMTEK CEM130 Manual de usuario

AXIOMTEK

AXIOMTEK CAPA500 Manual de usuario

AXIOMTEK

AXIOMTEK MANO500 Series Manual de usuario

AXIOMTEK

AXIOMTEK PICO821 Series Manual de usuario

AXIOMTEK

AXIOMTEK SBC84820 Series Manual de usuario

AXIOMTEK

AXIOMTEK EP830 Series Manual de usuario

AXIOMTEK

AXIOMTEK IMB760 Manual de usuario

AXIOMTEK

AXIOMTEK CEM300 Manual de usuario

AXIOMTEK

AXIOMTEK EP820 Series Manual de usuario

AXIOMTEK

AXIOMTEK EP600 Series Manual de usuario

AXIOMTEK

AXIOMTEK SHB210 Series Manual de usuario

AXIOMTEK

AXIOMTEK MANO300 Series Manual de usuario

AXIOMTEK

AXIOMTEK CAPA840 Manual de usuario

AXIOMTEK

AXIOMTEK MANO840 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario