AXIOMTEK PANEL1080-845 Manual de usuario

PANEL1080-845

All-in-One

8.4” Super Slim

PANEL PC

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of

patents or other rights of third parties, which may result from its use.

AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in

this document. AXIOMTEK makes no commitment to update or to keep current the

information contained in this manual.

AXIOMTEK reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of AXIOMTEK Co.,

Ltd.





August 2002, Version A2

Printed in Taiwan

iii

Safety Approvals

! CEMarking

! FCCClassA

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.

Safety Precautions

Before getting started, read the following important cautions.

1. The PANEL1080-845 does not come equipped with an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the PANEL1080-845

before making any installation. Be sure both the system

and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the

PANEL1080-845 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PANEL1080-845 may come

with or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the PANEL1080-845, make

sure it is securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

# Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on

your body.

# When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and QuickBASIC are trademarks of

Microsoft Corporation.

C&T is a trademark of Chips and Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

This page does not contain any information.

Table of Contents vii

Table of Contents

Chapter 1 Introduction------------------------------- 1

1.1 General Description..........................................1

1.2 Specifications...................................................2

1.2.1 Core System for PANEL1080-845 SBC84500-based

system......................................................................2

1.2.2 I/O System................................................................2

1.2.3 Built-in Peripherals ...................................................3

1.2.4 System Specification...............................................4

1.3 Dimensions.......................................................5

1.4 I/O Outlets ........................................................6

1.5 Utilities Supported............................................6

Chapter 2 System Configuration------------------ 7

2.1 System Configuration.......................................7

2.1.1 Front View................................................................7

2.2 Panel Mount......................................................8

Chapter 3 System Installation --------------------- 9

3.1 CompactFlashTM and DRAM Installation .........10

3.2 HDD Installation .............................................11

3.3 3 x Serial Ports...............................................13

3.4 Parallel Port....................................................13

3.5 VGA ................................................................14

3.6 Ethernet..........................................................14

3.7 Digital I/Os......................................................15

3.8 Keyboard and PS/2 Mouse Connector ---------- 15

3.9 External FDD ..................................................16

3.10 CompactFlash™Socket (U25) ........................17

3.11 System O/S and Software Installation ............17

Appendix A Power Supply Specifications ----19

Appendix B General Care & Maintenance-----27

viii

This page does not contain any information.

PANEL1080-845 8.4” All-in-One PANEL PC User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detailed

specifications of the PANEL1080-845. Chapter 1 includes the

following sections:

$ General Description

$ System Specification

$ Dimensions

$ I/O Outlets

$ Utilities Supported

1.1 General Description

The PANEL1080-845 super slim industrial PANEL PC is mainly

designed for industrial automation and some space-constricted

embedded applications. For some space-concerned industries, a

traditional PC with a separate main system, display monitor and

keyboard is simply not integrated enough.

Ruggedly designed, the PANEL1080-845 is 100% IBM PC/AT

compatible and it integrates super I/Os, VGA, 8.4” TFT touchscreen,

Ethernet, and packs special industrial features like watchdog timer,

CMOS double backup, all in a single system. The full PC functionality

coupled with its industrial-grade construction easily tailors the system

for any embedded applications and allows the system to endure

continuous operation in any hostile industrial environments where

stability and reliability are a must. Common applications of the

PANEL1080-845 include tooling machine, POI terminal, stand-alone

KIOSK, medical instrument, mobile communication device and

banking system - to name just a few.

PANEL1080-845 is virtually the ultimate one-step solution for your

space-limited applications.

PANEL1080-845 8.4” All-in-One PANEL PC User’s Manual

Introduction

1.2 Specifications

1.2.1 Core System for PANEL1080-845

SBC84500-based system

CPU: 233MHz National Semiconductor Geode Gx1 (other

frequency processors are manufacturer optional)

System Chipset: NX Gx1 + CS5530A

BIOS: Award BIOS, Y2K compliant

2Mbit Flash ROM, DMI, Plug and Play

System Memory: 1x144-pin SODIMM Max. 128MB SDRAM

Real Time Clock: Integration in W83977AF with external

Lithium Battery

Watchdog Timer: System reset software programmable

timer interval 64 levels, 0.5~8 / 5~80 /

50~800 / 100~1600 seconds

1.2.2 I/O System

$ Standard I/O:

− 4 x serial ports with power;

3 x RS-232, 1 x

RS-232/422/485 jumper

selectable

− 1 x parallel port,

SPP/EPP/ECP

− 1 x External FDD Interface

− 1 x HDD Interface

− 1 x PS/2 Type (Mini-Din

Connector)

− 1 x External IDE Interface

− 1 x USB Ports

Digital I/O: Input x 4, Output x 4

Ethernet:

− Realtek 8139C PCI PnP 10/100Base-T Ethernet

− RJ-45 connector

Tabla de contenidos

Otros manuales de PC industrial de AXIOMTEK

AXIOMTEK

AXIOMTEK eBOX560-900-FL-US Manual de usuario

AXIOMTEK

AXIOMTEK eBOX560-512-FL Manual de usuario

AXIOMTEK

AXIOMTEK tBOX510-518-FL-24-110MRDC Manual de usuario

AXIOMTEK

AXIOMTEK tBOX810-838-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK eBOX627-312-FL Manual de usuario

AXIOMTEK

AXIOMTEK EBOX670-891-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK ICO500-518 Series Manual de usuario

AXIOMTEK

AXIOMTEK tBOX110-APL-MR Series Manual de usuario

AXIOMTEK

AXIOMTEK eBOX627-312-FL Manual de usuario

AXIOMTEK

AXIOMTEK tBOX321-870-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK eBOX671-885-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK TBOX313-835-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK eBOX671-521-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK eBOX671-517-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK tBOX300-510-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK IPC960-525 Series Manual de usuario

AXIOMTEK

AXIOMTEK IPC974-519-FL Manual de usuario

AXIOMTEK

AXIOMTEK IPC932-230-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK IPC962-512-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK IPC960A Series Manual de usuario

AXIOMTEK

AXIOMTEK GO712S-837-R-E3845-24-110VDC Manual de usuario

AXIOMTEK

AXIOMTEK IPC910H Series Manual de usuario

AXIOMTEK

AXIOMTEK UST510-52B-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK eBOX627-312-FL-N3350-DC Manual de usuario

Manuales populares de PC industrial de otras marcas

Chipsee

Chipsee PPC-A72-101 Manual de usuario

Advantech

Advantech UNO-2184G Manual de usuario

MSI

MSI MS-9A76 Manual de usuario

Stackrack

Stackrack THOR200 Manual de usuario

Moxa Technologies

Moxa Technologies DA-682C Series Manual de usuario

Nodka

Nodka eBOX-3000-ETC Manual de usuario

Siemens

Siemens SIMATIC IPC627E Manual de usuario

MSI

MSI MS-9A89 Manual de usuario

Artila

Artila Matrix-516 Manual de usuario

Siemens

Siemens SIMATIC Rack PC 840 V2 Manual de usuario

Advantech

Advantech IPPC-6152A Manual de usuario

Beckhoff

Beckhoff CX9020 Manual de usuario

Dell

Dell Embedded Box PC 5000 Manual de usuario

IBASE Technology

IBASE Technology ASB200-918 Series Manual de usuario

Lenovo

Lenovo ThinkCentre M90q Manual del propietario

IXXAT

IXXAT Econ 100 Manual de usuario

Kontron

Kontron KBox A-151-TGL Manual de usuario

JLT

JLT 1214N Manual de usuario