Axing EoC 1-01 Ethernet over Coax Manual de usuario

EoC 1-01

Ethernet over Coax

Operation Instructions

Operation Instructions | EoC 1-01 | Ethernet over Coax

2 2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten

Contents

1.Product description ....................................................................................................................................... 4

1.1.Disposal of wastes................................................................................................................................ 4

1.2.Scope of delivery................................................................................................................................... 4

1.3.Field of application ............................................................................................................................... 5

1.4.Connections, indications, operating elements ...................................................................................... 6

1.5.Application examples ........................................................................................................................... 7

2.Installation and commissioning .................................................................................................................... 9

3.Basic functions............................................................................................................................................ 10

3.1.Standby mode:.................................................................................................................................... 10

3.2.EoC Reset button:............................................................................................................................... 10

3.3.EoC Reset Function:............................................................................................................................ 10

4.EoC network with encryption...................................................................................................................... 11

4.1.Pair or group formation: ..................................................................................................................... 11

5.Troubleshooting.......................................................................................................................................... 12

5.1.LEDs.................................................................................................................................................... 12

6.Technical data............................................................................................................................................. 13

6.1.Data sheet .......................................................................................................................................... 13

6.2.Drilling template................................................................................................................................. 14

2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten 3

Safety instructions

Do NOT use the device near water or in rooms with high humidity such as humid cellars or near swimming

pools.

Do NOT use the device outdoors. All connections must be located inside a building.

Keep the device away from moisture, dust or corrosive liquids.

Do NOT install the device, use it or perform maintenance during a thunderstorm. There is a risk of electric

shock during thunderstorm.

Connect ONLY appropriate accessories to the device.

Make sure that all cables are connected to the correct port.

Carefully lay the Ethernet, antenna and electric cables to ensure that nobody can step on or stumble over

them.

Do NOT cover the ventilation slots of the device since insufficient air supply may result in damage to the

device.

Do NOT place any objects on the device. Position the device in a place where NOBODY can step on it.

Prior to maintenance or dismounting work, disconnect the Ethernet and electric cable from the device.

In case of damage, interrupt the power supply.

Do NOT try to repair the device. Contact your local retailer to order a new device.

Do NOT open the device or unit. Opening the device or removing its covers causes risks, for example due

to high voltage. This device should ONLY be repaired or uninstalled by qualified service personnel. For

more information, contact your retailer.

Operation Instructions | EoC 1-01 | Ethernet over Coax

4 2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten

1. Product description

1.1. Disposal of wastes

Your device is marked with the WEEE symbol (Waste Electronics and Electrical Equipment).

This means that the electrical and electronic components must not be disposed of as

residual waste. Used electrical and electronic components must be disposed of separately.

1.2. Scope of delivery

EoC 1-01

1 x EoC 1-01 Ethernet over Coax Modem

1 x Network cable 1.5 m (RJ45)

1 x Power cable with euro plug

1 x CFA 8-00 terminating resistor

1 x Quick Start Guide

EoC 1-00

2 x EoC 1-01 Ethernet over Coax Modem

2 x Network cable 1.5 m (RJ45)

2 x Power cable with euro plug

2 x CFA 8-00 terminating resistor

2 x Quick Start Guide

Lieferbares Zubehör:

IEC connecting cable 1.5…10 m BAK 150-80 – 999-80

Modem connecting cable 1.5…10 m MAK 150-80 – 999-80

Adapter F/IEC CFA 1-00, IEC socket / F plug

Adapter F/IEC CFA 10-00, IEC plug / F plug

Combiner TZU 40-03

2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten 5

1.3. Field of application

The EoC 1-01 modem allows feeding in of IP data signals from the Internet, for example via a router in an

existing coaxial antenna distributor, such as SAT-IF-, DVB-T, CATV- or head end distribution systems (in the

star or tree distribution).

Several Eoc 1-01 modems communicates in a Peer-to-Peer mode. This means that each modem can

communicate with each modem in the network.

The advantage of an ethernet solution over a coax solution is that no new network cables must be laid. The

data is transmitted through the low-attenuation return channel, frequency range of 2...68 MHz. Depending on

the quality of the coaxial cable, transmission distances of up to 700 m can be realized.

The feeding in is performed via the return channel capable terrestrial input of the SAT multiswitch, via the

terrestrial input of the antenna distributor structure or via a return channel capable antenna socket in the

distribution network (see example 1...5).

Internet or other fed IP data are available at return channel capable antenna sockets (e.g. AXING antenna

socket BSD 4-xx, BSD 21-xx, BSD 960-00, BSD 961-xx, BSD 963-xx, SSD 2-xx, SSD 4-00, SSD 5-xx, SSD 6-xx or

SSD 7-00) (connection examples for AXING antenna sockets are given on the Internet under www.axing.com |

Download).

Two networkable devices can be connected to the LAN ports of a EoC modem. The IP network can be extended

to up to 64 EoC devices.

All devices connected to the EoC modems can communicate between each other. Data is exchanged, network

games are transmitted or a centralized network printer can be accessed. For the monitoring of houses, rooms

etc., an IP camera can be operated via a EoC modem.

Operation Instructions | EoC 1-01 | Ethernet over Coax

6 2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten

1.4. Connections, indications, operating elements

1. Power ON/OFF

2. LAN 2, RJ 45 socket

3. EoC F-socket (data + TV 2-862 MHz)

4. TV- F socket (85-862 MHz)

5. Reset button

6. Security button

7. LAN 1, RJ 45 socket

8. Mains socket 110-230 V

9. Power LED

10. EoC LED

11. LAN 1 LED

12. LAN 2 LED

A TV or radio device can be connected to the TV-F socket on the rear side of the EoC modem. The integrated

distributor is equipped with a highly selective filter so that the TV/radio reception is not interfered with by the

data traffic.

If the TV F socket ist not used, the socket has to be terminated with an termination resistor

CFA 800!

2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten 7

1.5.Application examples

All components in the distribution structure must support the return channel frequency range 2-68 MHz. This

also applies to SAT multiswitches, the passive distribution components and for antenna sockets.

Feeding in of IP data in a SAT-IF distribution structure:

Example 1: The feeding of the IP signal is performed via the return channel capable antenna socket.

Example 2: The feeding of the IP signal is performed via the return channel capable terrestrial input of the

multiswitch. A combiner TZU 40-03 is used. It prevents that the IP signals are transferred via the return

channel into the receive antenna system.

If the terrestrial input of

the SAT multiswitch is not

assigned, it must be

terminated with a

75 Ohm terminating

resistor.

Operation Instructions | EoC 1-01 | Ethernet over Coax

8 2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten

Feeding in of IP data in a CATV distribution structure:

Example 3: The feeding of the IP signal is performed via the return channel capable antenna socket. If the

IP-data are fed via the antenna socket, a high-pass filter TZU 19-65 must be installed in the coaxial supply line

(amplifier output).

Example 4: IP data feeding for exactly one antenna socket: The feeding of the IP signal is performed via the

EoC combiner TZU 40-03. The integrated high pass of 85-1006 MHz prevents the transmission of the IP

signal in the CATV network. The antenna socket BSD 963-13 is equipped with a high pass filter on the trunk.

The IP signal will not be transferred to the following antenna sockets.

Feed in of IP data in a headend system:

Example 5: The feeding of the IP signal is performed via the EoC combiner TZU 40-03. The combiner TZU

40-03 has an integrated high pass of 85-1006 MHz. The high pass prevents the transmission of the IP signals

to the head end.

2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten 9

2. Installation and commissioning

1. Connect the router with the enclosed Ethernet cable to one of both RJ-45 LAN sockets of the EoC modem.

2. Connect the EoC socket to the available antenna network structure

(see example 1 to 4).

There are several ways to feed the IP data into the existing antenna network structure.

–via a return channel capable antenna socket in the distribution network (see example 1 or 3)

–via the passive terrestrial input of the SAT multiswitch or the passive terrestrial input of a distribution

structure (see example 2 or 4).

3. Connect your computer using the enclosed Ethernet cable to one of both RJ-45 LAN sockets of the second

EoC modem.

4. Then connect the EoC modem using the EoC-F socket to the return channel capable antenna socket (see

example 1 or 3) or to the return channel capable EoC combiner (see example 2 or 4).

Repeat step 3 + 4 for further commissioning of EoC 1-01.

After all connections have been established, the EoC devices can be switched on by means of the mains switch

and the connected devices (PC, laptop etc.) can be booted up.

The LEDs Power, EoC, LAN and WiFi are lit and the data transfer is established.

Notes:

Up to two networkable devices can be connected to one EoC modem.

Additionally, a TV or radio device can be connected to the TV-F socket of the EoC modem.

Operation Instructions | EoC 1-01 | Ethernet over Coax

10 2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten

3. Basic functions

After having switched on the EoC modem, the LEDs should indicate the following states:

The green Power LED is lit.

–After approx. 10 seconds, the LEDs are lit/flashing as follows:

–EoC LED green (flashes in case of data traffic)

–LAN LED green (flashes in case of data traffic)

–WiFi LED green (if WiFi is switched on) green (flashing in case of data traffic)

3.1. Standby mode:

The EoC modem switches after several minutes without data traffic to the Standby mode. The Power LED is

flashing green then.

3.2. EoC Reset button:

The EoC reset button is used for the following functions:

reset to the factory default setting (press > 10 s).

delete the network key (press 5…8 s)

generate a private network (press <1 s)

3.3. EoC Reset Function:

Hold the reset button depressed for one second using a bent up paper clip, in order to reset the device to the

factory defaults.

The EoC reset button does not work in standby mode.

Tabla de contenidos

Otros manuales de Hardware de red de axing

axing

axing EoC 1-11 Manual de usuario

axing

axing EoC 10-01 Manual de usuario

axing

axing EOC 1-32 Manual de usuario

axing

axing RF MK 400 Manual de usuario

axing

axing SMARTPortal Manual de usuario

axing

axing EOC 20-02 Manual de usuario

axing

axing premium-line CZU 3-00 Manual de usuario

axing

axing EOC 1-31 Manual de usuario

axing

axing MIE 8-00 Manual de usuario

axing

axing EOC 30-01 Manual de usuario

axing

axing EoC 20-01 Manual de usuario

axing

axing MIE 16-00 Manual de usuario

axing

axing MIE 8-00N Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

axing EoC 1-01 Ethernet over Coax Manual de usuario

Manuales populares de Hardware de red de otras marcas