Axema AXCALL ADI-611 Manual de usuario
P
Pr
ro
oj
je
ec
ct
ti
in
ng
g
a
an
nd
d
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
m
ma
an
nu
ua
al
l
A
AX
XC
CA
AL
LL
L
A
AD
DI
I-
-6
61
11
1/
/6
61
16
6/
/6
60
08
8
AXCALL Installation manual V1.3
TABLE OF CONTENTS
1. INTRODUCTION...............................................................................2
2. BLOCK DRAWING............................................................................3
Normal connection ADI-611 and ADI-616......................................................3
Security connected ADI-611 and ADI-616......................................................4
Normal connection ADI-616 and ADI-608......................................................5
Normal connection ADI-616 and SWU............................................................6
3 pcs DI-611 to 2 pcs SWU cascade connected..............................................7
Connection of extra buzzer/signal device.........................................................8
Connection of extra amplifier/line amplifier....................................................9
3. CONNECTION DIAGRAM...............................................................10
AXCALL ADI-611, ADI-616...........................................................................10
AXCALL ADI-608.............................................................................................11
AXCALL SWU...................................................................................................12
4. CONNECTION EXAMPLE................................................................13
ADI-611 to DI-651.............................................................................................13
ADI-616 to DI-651.............................................................................................14
2 pcs ADI-611 to SWU......................................................................................15
2 pcs ADI-616 to SWU......................................................................................16
Cascade connection of SWU.............................................................................17
Cascade connection with SWU and ADI-608................................................18
Modification of front plate for LED indication.............................................19
Mounting LED indication panel in DI-651.....................................................20
Connection of LED indication unit..................................................................21
Connection of ADI-611 to DI-651-1...............................................................22
Line amplifier DI-653-2 connected to DI-651...............................................23
Line amplifier DI-653-2 connected to DI-653-1...........................................24
Extra buzzer DI-653-1........................................................................................25
AR-12 TO OTHER SIGNAL DEVICE..........................................................26
AR-12 AS SECURITY DEVICE.....................................................................27
22. Introduction
AXCALL Installation manual V1.3
1. INTRODUCTION
Axcall is an conventional door intercom system, witch means that cables between
intercom and handset is needed. The system include 2 different intercom ADI-611
with 1 calling button and ADI-616 with 6 calling buttons, and an extension unit
ADI-608 with 8 calling buttons. Inside the building can one or more handset be
mounted. DI-651 which is standard unit, DI-651-1 which has a button to turn of
the calling signal, and one led to indicate e.g opening signal, and DI-651-2 which
has 2 free push buttons.
A simple system include door intercom, handset and power supply, and if opening
function is needed an electrical strike. If more than one intercom will be connected
to the one handset a switch unitSWU has to be included, if indication unit DI-655
is added an indication from which intercom the call is coming from. If more than 6
calling buttons is needed you have to use extension unit ADI-608, then up to 14
handset can be reached .
To one intercom maximum 3 handset can be connected in parallel, if more want to
be connected a line amplifier DI-653-2 must be used to have enough buzzer signal.
DI-653-2 is a good complement if handset is in a noisy environment. If you need a
stronger buzzer signal or a signal on more than one place, use speaker DI-653-1.
To have a safer system use the security relay AR-2, then you get a more
manipulating safer function. Our transformer TF-3 must be used as power supply,
one to the whole system. It is an 24VDC transformer and have a 2200uF capacitor
on the output. The choice of power supply is very important to avoid noise in the
system.
Here is some block drawing showing the most common connections. The number
of wire that shows in the drawings is the minimum, we recommend that more
wires is added to cover extra functions ( e.g. power supplyto line amplifier, LED
indication).
2. Block drawing 3
AXCALL Installation manual V1.3
2. BLOCK DRAWING
NORMAL CONNECTION ADI-611 AND ADI-616
Reception
ADI-611
Normal installation
Normal installation
Handset DI-651
7 x Handset DI-651
Axel
Andersson
Beda
Bengtsson
Cesar
Celsing
David
Danielsson
Erik
Erixsson
Fredric
Forsyte
ADI-616
Handset in parallel
to button 6
Transformer
24V DC
Transformer
24V DC
TF-3
TF-3
42. Block drawing
AXCALL Installation manual V1.3
SECURITY CONNECTED ADI-611 AND ADI-616
Axel
Andersson
Beda
Bengtsson
Cesar
Celsing
David
Danielsson
Erik
Erixsson
Fredric
Forsyte
Reception
ADI-611
ADI-616
Time relay
AR-2
Time relay
AR-2
External opening relay
(high security)
External opening relay
(high security)
Handset DI-651
6 x DI-651Handset
Transformer
24V DC
Transformer
24V DC
TF-3
TF-3
2. Block drawing 5
AXCALL Installation manual V1.3
NORMAL CONNECTION ADI-616 AND ADI-608
Axel
Andersson
Beda
Bengtsson
Cesar
Celsing
David
Danielsson
Erik
Erixsson
Fredric
Forsyte
ADI-608
ADI-616
Extention to 14 connections
14 x DI-651Handset
Axel
Andersson
Axel
Andersson
Axel
Andersson
Beda
Bengtsson
Cesar
Celsing
David
Danielsson
Erik
Erixsson
Fredric
Forsyte
Transformer
24V DC
TF-3
62. Block drawing
AXCALL Installation manual V1.3
NORMAL CONNECTION ADI-616 AND SWU
SWU
Normal installation using SWU
6 x Handset DI-651
Transformer
24V DC
Axel
Andersson
Axel
Andersson
Beda
Bengtsson
Beda
Bengtsson
Cesar
Celsing Cesar
Celsing
David
Danielsson
David
Danielsson
Erik
Erixsson Erik
Erixsson
Fredric
Forsyte Fredric
Forsyte
ADI-616
TF-3
ADI-616
2. Block drawing 7
AXCALL Installation manual V1.3
3 PCS DI-611 TO 2 PCS SWU CASCADE CONNECTED
Reception
Reception
Reception
ADI-611
ADI-611
ADI-611
Normal intallation with 2 SWU cascade connected
Handset DI-651 with LED unit DI-655
SWU
Transformer
24V DC
TF-3
ENTRE B
ENTRE A
ENTRE C
ENTRE D
82. Block drawing
AXCALL Installation manual V1.3
CONNECTION OF EXTRA BUZZER/SIGNAL DEVICE
Reception
ADI-611
AR1 el AR2
Signal device
Normal installation using extra signal device
Handset DI-651
TF-3
Reception
ADI-611
Normal installation using extra buzzer
Handset DI-651 and buzzer DI-653-1
Transformer
24V DC
Transformer
24V DC
TF-3
2. Block drawing 9
AXCALL Installation manual V1.3
CONNECTION OF EXTRA AMPLIFIER/LINE AMPLIFIER
Reception
Reception
ADI-611
ADI-611
Installation using amplifier to extra buzzer
Installation with amplified buzzer signal
Handset DI-651 with amplified extra buzzer DI-653-1
Handset DI-651 with line amplifier DI-653-2
Transformer
24V DC
Transformer
24V DC
AmplifierDI-653-2
Build in amplifier
DI-653-2
TF-3
TF-3
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Axema
