AVUMDA ZL80 Manual de usuario
Smart Watch User Manual
English Version ----------------------01-06
Deutsche Version -------------------07-12
Version Française ------------------13-18
Versione italiana ------------------19-24
Versión española --------------------25-30
Contents (V1.2)
Spansk version ----------------------31-36
Wersja hiszpańska ------------------37-42
İspanyolca versiyonu ---------------43-48
Spaanse versie ----------------------49-54
Downloading the APP
Scan the following QR code,
download and install the "DaFit" App
Charging
EN
Charging the device to active
before the first time using;
Charging your device, plug the
charging cable into the adapter or
USB port on your computer.
Pairing
In the smart watch, the MAC
address on the -
"Setting"-"About" - "Version
"page can help you identify
your device on the scanning
list.
Scan QR Code and Download
1
Use the Touch Screen
Phone Call
EN
Connect the smart watch with
your mobile phone via the
mobile phone's Bluetooth to
make and answer calls.
Note : must connect the smart
watch with your mobile phone
via the DaFit APP to ensure
other functions work well.
2
Swipe
Up
Swipe
Down
Swipe
Up
Swipe
Down
Swipe
Right
Swipe
Left
Swipe
Left
Swipe
Right
Feature pagesMenue
Control Center
Messages
Points to note when using:
1. Before using this APP, please turn on your cell phone Bluetooth and cell
phone GPS to get mobile positioning permission. Then, click Add Device in
the APP, after successful connection, it will prompt: "To pair with: ZL80",
please select "Pair".
Please note:
(1) For Android users, the APP should obtain permissions and run
backstage, otherwise it will affect the user experience.
(2) For some older iPhone models and systems below iOS 13, sometimes
the prompt: “To pair with: ZL80” may not pop up. You need to connect and
pair ZL80 in the Bluetooth settings of your phone. And then functions such
as making calls and playing multimedia music can be realized
2. Please do not leave the smart watch more than 5 meters away from the
mobile phone during a call, otherwise the call quality will be affected.
3. Please make sure that the phone function and the audio function are
turned on, otherwise you can not find the smartwatch by your mobile phone
Bluetooth. you can turn on them from "Setting"- "Phone", or you can also
swipe down the screen from the home page to find the phone icon,
change the icon color to "Blue" to turn on it. see below picture:
EN
4. If the smart watch has been connected by
another mobile phone, please disconnect it from
that mobile phone from the DaFit APP and from
the mobile phone Bluetooth, then you can use a
new mobile phone to connect it via DaFit App
and mobile phone Bluetooth.
3
Smart Watch Features
EN
Sleep
If you keep wearing the Smart
Watch during your sleep , it can
provide the sleep time and sleep
quality on both the smartwatch
and the DaFit App. You can swipe
up the screen from the sleep
interface to see more information.
NOTE : the sleep monitor from 10pm
to next day's 8am.Sleep stats will be
reset to zero at 8:00 pm
Heart Rate Monitor
The Smart Watch can monitor
your heart rate all day (you need
to turn on the auto monitor
function in the “DaFit” App first).
You can also tap on the smart
watch to start measuring the real
time heart rate. You can swipe up
the screen from the heart rate
interface to see more information.
Activity
Smart Watch automatically tracks
Steps and calories taken all the
day. You can swipe up the screen
from the Activity interface to see
more information.
NOTE: the movement stats reset
to zero at midnight.
SpO2
Tap on the SpO2 interface to
start measuring your SpO2.On
the SpO2 interface. It can show
the last time SpO2 data.
You can swipe up the screen
from the SpO2 interface to see
more information.
Exercise
Tap the exercise icon on the
menu to start a new exercise
measure, there are more than
100 sport modes to be chosen.
Blood Pressure monitor
Tap on the blood pressure
interface to start measuring your
blood pressure. On the blood
pressure interface, It can show
the last time blood pressure
measured data.You can swipe up
the screen from the Blood
Pressure interface to see more
information.
4
Weather
It can show the weather data of 7
days on the weather interface.
Weather info is synced after
connecting with the mobile phone
via the DaFit APP.
You can swipe up the screen from
the Weather interface to see more
information.
Messages Reminder
The device can sync incoming
notifications from Twitter,
Facebook, Whatsapp, Instagram
etc. You can store 5 recent
messages.
Note: You can switch on/off the
incoming notification in the DaFit
App
Music Player
After connecting the smart watch
with your mobile phone via the
DaFit App,you can remote control
the music player by the smart
watch.
Silent Alarms
You can set up the alarm in the
DaFit App, the smart watch will
vibrate to alarm on time.
Remote Shutter
After connecting the smart watch
with your mobile phone via the
DaFit App,you can remote control
the mobile phone camera by the
smart watch.
Other Features
Other features include stopwatch,
alarm, timer, brightness, mute on/
off, low power mode, factory
reset, power off,find phone,
alculator.
EN
5
Getting to Know Your Device
EN
1.Using in Wet Conditions
This smart watch is water-resistant, which means it is rain-proof and
splash-proof and can stand up to even the sweatiest workout.
NOTE: Not suitable for bathing in hot water; Not suitable for swimming for a long
time. Whenever you get your smart watch wet, dry it thoroughly before putting it
back on. Do not charge the watch if it is water-stained.
2.Using Quick View
With Quick View you can check the time or the message from your phone on
your Smart watch without taping. Just raise up your wrist towards to your face
and the smart watch screen will be lighted up for a few seconds.
General Info & Specifications
1. Size
Fits a wrist between 6.0 and 9.0 inches in circumference.
2.Disposal and Recycling
Please kindly be aware that it is the consumer's responsibility to property
dispose and recycle Smart watch and accompanying components. Do not
dispose of Smart watch with common household waste, the Smart watch unit is
considered as electronic waste and should be disposed of at your local
electronic equipment collection facility.
For more information, please contact your local electronic equipment waste
management authority or the retailer where you bought the product.
If you have any question or product problem,
please send us an email:
6
Herunterladen der APP
Scanned Sie den folgenden QR-Code,
laden Sie die“DaFit”App herunterund
installieren Sie diese
Laden
DE
Laden Sie das Gerät vor der ersten
Verwendung komplett auf;
Laden Sie Ihr Gerät auf, stecken
Sie das Ladekabel in den Adapter
oder USB-Anschluss Ihres
Computers.
Verbinden
Öffnen Sie die App und richten Sie Ihr Profil ein
Gehen Sie zu “Gerät”, klicken Sie auf “Hinzufügen
Wählen Sie Ihr Gerät aus der gescannten Liste aus
Ende
In der Smartwatch kann Ihnen
die MAC-Adresse auf der
Seite „Einstellungen“ – „Über“
– „Version“ dabei helfen, Ihr
Gerät in der gescannten Liste
zu identifizieren.
7
QR-Code scannen und herunterladen
Touchscreen
Anruf
DE
Verbinden Sie die Smartwatch
über Bluetooth des mit Ihrem
Mobiltelefon, um Anrufe zu
tätigen und entgegenzunehmen.
Hinweis: Sie müssen die
Smartwatch über die DaFit-
APP mit Ihrem Mobiltelefon
verbinden, um sicherzustellen,
dass andere Funktionen
funktionieren.
8
Nach
oben
wischen
Nach
unten
wischen
Nach
oben
wischen
Nach
unten
wischen
Nach
links
wischen
Nach
rechts
wischen
Nach
links
wischen
Nach
rechts
wischen
FunktionsseiteFunktionsliste
Kontrollzentrum
Nachrichtenliste
Tabla de contenidos
Idiomas:
