until
itself to the last paired device, if available, and the warning
LED flash slowly in blue to confirm the connection. If there is
Bluetooth® turns off in about 7 minutes in order to prevent
battery from discharging.
device.
To pair for the first time, pair for a second time or to pair to
signaled by the transparent fins flashing alternately and
quickly red and blue. To activate the pairing mode you need
holding the button until the transparent fins flash alternately
the list of found devices on your device. As soon as the device
is paired, the transparent fins flash slowly blue.
Now it is possible to listen to music and to make calls* through
at the same time. To do this, pair the first device as explained
before, then repeat this step with another devices. At this point
the two paired devices could be connected at the same time
and priority is assigned to the last device that start streaming
Switch on hi-Bomb Bluetooth®.
To switch on hi-Bomb Bluetooth® hold the button
transparent fins turns on and hi-Bomb Bluetooth® emits 4
acustic tones. Afterwards hi-Bomb automatically connects
no available paired device or if it is out of range, hi-Bomb
Pair hi-Bomb Bluetooth® with a compatible
a different device, hi-Bomb must be set in pairing mode,
to switch off hi-Bomb Bluetooth® and switch it on again
red and blue. Now you can select hi-Bomb Bluetooth® from
hi-Bomb Bluetooth® (*thanks to the integrated microphone).
It is also possible to pair hi-Bomb Bluetooth® to 2 devices
