Avision FB6000 Manual de usuario

Avision FB6000 Color Image Scanner

User’s Manual

¦Installing the Scanner

¦Installing the Software

¦Editing Your Image

¦Maintenance

¦Troubleshooting

Trademarks

Microsoft is a U.S. registered trademark of Microsoft Corporation.

Windows and MS-DOS are trademarks of Microsoft Corporation.

IBM, PC, AT, XT are registered trademarks of International Business

Machines Corp.

Other brands and product names herein are trademarks or registered

trademarks of their respective holders.

transmitted, transcribed, stored in a retrieval system, or translated into

any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise, without the prior written permission of Avision Inc.

Material scanned by this product may be protected by governmental

laws and other regulations, such as copyright laws, the customer is

solely responsible for complying with all such laws and regulations.

Warranty

The information contained in this document is subject to change

without notice.

Avision makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of fitness for a

particular purpose.

Avision shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing,

performance, or use of this material.

iii

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits

for a class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may

cause harmful interference to radio communication. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: To assure continued compliance, (example -use

only shield interface cables when connecting to computer or peripheral

devices). Any changes or modifications not expressly approved by

the manufacture of this device could void the user's authority to

operate the equipment. This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

Responsible Party: Avision Labs, Inc.

Telephone No.: +1 (510) 739-2369

TABLE OF CONTENTS

1. INTRODUCTION.......................................................1-1

2. SCANNER INSTALLATION ...................................2-1

2.1 PRECAUTIONS ..........................................................2-1

2.2 UNLOCKING YOUR SCANNER........................................2-2

2.3 SETTING SCSIID......................................................2-3

2.4 SETTING SCSITERMINATOR ........................................2-3

2.5 SETTING SCSISYNC SWITCH......................................2-5

2.6 CONNECTING THE CABLES ...........................................2-6

2.7 PLACING YOUR ORIGINAL............................................2-7

3. SCANNER DRIVER INSTALLATION...................3-1

3.1 SYSTEM REQUIREMENTS..............................................3-1

3.2 INSTALLATION STEPS..................................................3-1

3.3 SCANNING WITH IMAGE EDITING SOFTWARE......................3-2

3.4 AGLANCE OF THE USER INTERFACE...............................3-4

4. EDITING YOUR IMAGE ...........................................4-1

4.1 USING THE BASIC FEATURES .......................................4-1

4.1.1 Choosing Your Scan Method........................4-1

4.1.2 Selecting a Proper Image Type.....................4-2

4.1.3 Determining a Proper Resolution...................4-4

4.1.4 Adjusting the Brightness and Contrast ..........4-5

4.1.5 Enlarging Previewed Image...........................4-6

4.1.6 Inverting and Selecting Your Image ...............4-7

4.1.7 Enhancing Your Image.................................4-9

4.2 USING THE ADVANCED FEATURES...............................4-11

4.2.1 The Switch Button.....................................4-11

4.2.2 Adjusting Highlight/Shadow Levels..............4-12

4.2.3 Adjusting the Brightness Curve...................4-14

4.2.4 Changing Color Hue/Saturation/Lightness....4-15

4.2.5 Using Color Balance..................................4-16

4.2.6 Color Drop-out...........................................4-17

4.3 USING OTHER TOOLS................................................4-18

5. CARE AND MAINTENANCE..................................5-1

5.1 CLEANING THE GLASS ...............................................5-1

6. TROUBLESHOOTING.............................................6-1

6.1 FREQUENTLY ASKED QUESTIONS..................................6-1

6.2 TECHNICAL SERVICE..................................................6-3

7. SPECIFICATIONS....................................................7-1

7.1 MODEL:FB6000 .....................................................7-1

INDEX......................................................................................A

1-1

1. INTRODUCTION

Congratulations on your purchase of the Avision’s A3-sized color image

scanner. Avision is one of the leading companies to make high quality

color image scanner.

To ensure the optimum performance of the scanner, please take a few

minutes to read through this manual before you install and operate the

new scanner. The manual contains valuable information on how to

unpack, install, operate, and maintain the scanner properly.

Figure 1-1 in below shows how the scanner is packed. Please check

if all items are included. If there is any item missing or damaged,

please contact your nearest dealer immediately for replacement.

1-2

1. Scanner main unit

2. SCSI cable

3. User’s manual/CD/SCSI card

4. Power adapter

5. Power cord

Figure 1-1 Scanner Packaging

Note: When you unpack the scanner, retain the packing

material and shipping box in case you may transport the

scanner in the future.

2-1

2. SCANNER INSTALLATION

2.1 PRECAUTIONS

ØKeep the scanner out of direct sunlight. Direct exposure to the

sun or excessive heat may cause damage to the unit.

ØDo not install the scanner in a humid or dusty place.

ØBe sure to use the proper AC power source.

ØPlace the scanner securely on an even, flat surface. Tilted or

uneven surfaces may cause mechanical problems.

ØKeep the shipping box and the material in case you may need to

ship the scanner again.

2-2

2.2 UNLOCKING YOUR SCANNER

To protect the scanning unit from damage during transportation, a lock

switch is designed at the back of the scanner to keep the scanning

unit from moving. To unlock the scanner, move the lock switch up as

shown in Fig. 2-1.

Figure 2-1 Unlocking the Scanner

Figure 2-2 Home position

Note: If the scanning unit is not located at the front of the scanner

before transporting the scanner, be sure to do the follows:

1. Turn on the scanner.

2. The scanning unit should move to the front of the scanner.

3. Press the lock switch down to the “Lock position”.

4. The scanner is now ready to transport.

Unlocked

Locked

Scanning unit at

this position

before locking

the scanner

2-3

2.3 SETTING SCSI ID

When you have several devices on a SCSI chain, you may have to

adjust the SCSI ID selector setting at the back of the scanner(See

Figure 2-2). This setting assigns a specific "device ID" to the scanner.

If the ID number is duplicatedwith an existing SCSI device on the

SCSI chain, please select a new ID#.

Note: The factory setting for the scanner is ID# 6. Usually, ID# 0 is

assigned to an internal hard disk drive, and ID# 7, to SCSI adapter or

host. ID# 8 and #9 are not in use.

2.4 SETTING SCSI TERMINATOR

The scanner is equipped with a built-in terminator switch on the rear

side of the scanner (See also Figure 2-2). Move the switch to the “on”

position to enable the SCSI termination or to the “off” position to

disable the SCSI termination. The SCSI termination ensures the

electrical signal flow through the SCSI chain properly.

As a result, if the scanner is the only or final device connected to your

computer, you should enable your SCSI chain terminatesat the

scanner by moving the terminator switch to the “on” position. If your

scanner is linked between the host computer and other SCSI devices,

then the SCSI chain should terminate at the final SCSI device. In the

case, disable your SCSI termination on the scanner by moving the

terminator switch to “off” position.)

Tabla de contenidos

Otros manuales de Escáner de Avision

Avision

Avision FF-2204B Manual de usuario

Avision

Avision AEG-AN360W Manual de usuario

Avision

Avision FF-0901H Manual de usuario

Avision

Avision FF-0608S Manual de usuario

Avision

Avision AV120 Manual de usuario

Avision

Avision FB2280E Manual de usuario

Avision

Avision FF-1105B Manual de usuario

Avision

Avision AV630CS Manual de usuario

Avision

Avision AV332 Series Manual de usuario

Avision

Avision FB5100 Manual de usuario

Avision

Avision DL-1101S Manual de usuario

Avision

Avision AD215L Manual de usuario

Avision

Avision DL-1909H Manual de usuario

Avision

Avision MiWand 2 Lite Manual de usuario

Avision

Avision AV121 Manual de usuario

Avision

Avision DL-2104B Manual de usuario

Avision

Avision AD360GF Manual de usuario

Avision

Avision AV810C Manual de usuario

Avision

Avision 300500003 Manual de usuario

Avision

Avision BS-1005S Manual de usuario

Avision

Avision ScanQ FF-1302S Manual de usuario

Avision

Avision IS17 Manual de usuario

Avision

Avision AD280F Manual de usuario

Avision

Avision FT-1906H Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario