Avidyne IFD5 Series Manual de usuario
avidyne.com | 800.AVIDYNE
QUICK REFERENCE
IFD5XX
IFD550/IFD540 FMS/GPS/NAV/COM
IFD545/IFD510 FMS/GPS
IFD100 App for iPad
avidyne.com | 800.AVIDYNE
2
QuickReference IFD5XX
To move your cursor, either:
1. Turn the 6FMS knob (the outer ring scrolls through each box,
whereas the inner ring scrolls through the fields of each box), or
2. Utilize hybrid touch by tapping the screen on a waypoint
or in the blank space between waypoints.
Overview Diagram
113
141516
6
12
11
10
9
8
7
2
4
5
3
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Volume/Power/
Squelch Knob
CDI Nav Source
Active Waypoint
Standby Frequency*
Active Frequency*
Frequency Swap
(ip-op)
Direct To
Procedure
Nearest
Frequency
Enter (select)
Clear (delete)
FMS Knob (context-
sensitive: scroll, zoom/
push to select)
Line Select Keys
(LSK)
* COM/NAV Manual
Tuning Knob (Push for
NAV & Transponder)
Page Function Keys
(two-way rocker)
SVS**, FMS, MAP, AUX
To start an FMS edit, either:
1. Press the 8ENTR function key,
2. Push the 6bottom right knob, or
3. Tap the screen in the same field twice.
*VHF COM/NAV controls appy to IFD550/IFD540 only
**SVS Page Button applies to IFD550/IFD545 only.
1 2 3
TAB
avidyne.com | 800.AVIDYNE
4
QuickReference IFD5XX
FMS Flight Plan Introduction
Following power-
on, the first time the
“FPL” tab of the FMS
page is accessed,
an empty flight plan
page is presented with
the origin waypoint
pre-populated.
We recommend to tap
the “Map” side tab to
view the moving Map
display while entering
your flight plan.
The origin will be the
closest airport to the
current GPS position,
or the airport from the
previous power down
if GPS position has
not locked on yet.
This FMS uses a database of published airways to quickly build
long flight plans. Here’s how: When a flight plan waypoint is a valid
airway entry point, a dropdown list of available airways appears.
Scroll to the desired exit point, and all intermediate intersections
along that airway are automatically populated into the flight plan.
1 2 3
TAB
5
Inserting a Waypoint
To add a waypoint
to your flightplan,
tap the empty space
where your cursor is
below ‘Origin.’ The
IFD will present a
new waypoint with a
suggested identifier
(powered by Geofill™).
Use the right
knobs or tap the
identifier to display
the QWERTY
keyboard in order
to enter the
waypoint identifier.
Push the right
knob, press
ENTR, or tap
the ENTR key
on the QWERTY
keyboard to
enter the new
waypoint into
the flight plan.
Saving the Flight Plan
Once you have
entered a Flight
Plan that you
would like to save
for future use go
to the route tab
on the FMS page.
TAB
1 4
Select ‘Back
to Route List.’
The route will
now be one of
your saved route
selections.
2 3
Highlight current
route then select
Copy in the
bottom left of the
screen. You can
edit the Route
name or leave
as default name
(Origin Identifier-
Dest Identifier.)
You have now
saved the Flight
Plan as a route
for future use.
avidyne.com | 800.AVIDYNE
6
QuickReference IFD5XX
Activating a Stored Route TAB
To activate a route
from the stored routes
list, tap the desired
route to select.
1 2
To activate, press the
“Activate Route” LSK or
touch-screen button.
Then Press again to
“Activate Flightplan.”
7
Direct-To Operation
Press the Direct-To
button to display a green
Direct-To dialog box
pre-populated with the
waypoint highlighted in
your current flightplan.
1 2 3
To enter a dierent
waypoint, tap the data
field in the top dialog
box. The QWERTY
keyboard appears for
you to enter the desired
waypoint identifier.
To approve, tap the
‘Activate’ dialog box to
select. Pressing ENTR
or the right knob can
also be used to confirm.
TAB
avidyne.com | 800.AVIDYNE
8
QuickReference IFD5XX
9
Selecting a Departure
Tap the ‘Departure’
field. A dropdown
list of available
departure procedures
will be displayed.
Select a departure
name and push ENTR.
Enter the Transition by
selecting the assigned
departure runway.
1 2 3
TAB
1 2 3
avidyne.com | 800.AVIDYNE
10
QuickReference IFD5XX
Selecting an Approach
To display the
Approach field of the
next destination, press
the “PROC” Function
key.* This will display a
dropdown list of available
published approaches.
To select the desired
Approach, twist
the FMS knob to
scroll, then push to
select, or tap the
highlighted selection.
To select the Transition,
twist the FMS knob
to scroll, then push
to select, or tap the
highlighted selection.
TAB
*Pressing the “PROC” Function key a second time will move the cursor
over the Arrival field and present a drop down list of available published
arrivals. Each subsequent press of the “PROC” key will step through all
following destination airfield approaches/arrivals in the flight plan, and
wrap back around to the origin. When the drop down box appears over
the intended data field, tap the desired procedure to add to the flight plan.
Otros manuales para IFD5 Series
1
Este manual sirve para los siguientes modelos
5
Otros manuales de Pantalla aviónica de Avidyne
Avidyne
Avidyne IFD550 Manual de usuario
Avidyne
Avidyne 700-00182 Series Manual de servicio
Avidyne
Avidyne Entegra EX5000 Manual de usuario
Avidyne
Avidyne IFD440 Manual de usuario
Avidyne
Avidyne Envision EXP5000 Manual
Avidyne
Avidyne Entegra Manual
Avidyne
Avidyne Entegra EX5000 Manual
Avidyne
Avidyne IFD550 Manual
Avidyne
Avidyne Entegra EXP5000 Manual
Avidyne
Avidyne IFD4 Series Manual de usuario
Manuales populares de Pantalla aviónica de otras marcas
Smart Avionics
Smart Avionics PB-4 Manual de usuario
Midcontinent
Midcontinent SAM MD302 Manual
MGL Avionics
MGL Avionics Stratomaster Maxi Single FF-3 Manual de usuario
Garmin
Garmin GI 275 Manual de usuario
Mid-Continent Instruments
Mid-Continent Instruments 4300 Series Manual
Flybox
Flybox Oblo Manual de usuario
